Crosman air pistol - General > Crosman air pistol - General discussion

Five Easy Probes

(1/33) > >>

quickster47 †:
So which is better, the OEM bolt probe, a shaped extended bolt probe, a small diameter rod extended bolt probe, a flow through bolt probe, or a probeless bolt design?  This question gets asked over and over, and again and again on our forum and many others.  And while this is a pretty exhaustive test it will probably never be answered to suit everyone.  But that's okay.  If you do the same tests your results might vary from what mine showed.  Perhaps that is just the nature of the airgun beast.

I tried to be as consistent as I possibly could with my testing so as not to taint the results.  But I will tell you this right up front, I am so sick and tired of taking this gun apart that it will take me a month or more to recover, I think. :)

To start with I built up a basic 2240 gun but used a Crosman Custom Shop non stamped tube and a 1701P trigger frame.  Everything else is plain Jane 2240 stuff including the plastic breech and the front barrel band.

I used three different chronometers but finally settled on using a cb-625 chronoscope version 2 for all the final testing.  While some may pooh-pooh this let me say that as long as you don't mix apples and oranges it doesn't matter which one you use.  Just use the same one for consistency.  Another thing was for me and this testing it was all about convenience.  Mainly because I sat in the kitchen with the sliding door open and the screen door on the back covered deck wide open so I could shoot into the woods.

For the first test I wanted to characterize the 2240 so I fired 240 pellets and used eight powerlets.  I would fire 30 pellets and then change the powerlet.  I used the same pellets for all my testing, JSB Diabolo Exacts weighing in at 14.3 grams.

I will begin posting the resultant data throughout the day and evening as I have time.

Carl

droid:
I'm looking forward to this Carl, I have never been convinced that the probes make a major difference. So you will settle the argument with this for me.

quickster47 †:

--- Quote from: droid on March 25, 2013, 04:05:40 PM ---I'm looking forward to this Carl, I have never been convinced that the probes make a major difference. So you will settle the argument with this for me.
--- End quote ---

You will be surprised at the results and what ends up being the best probe as far as increased FPS.  I know I was.   :)

Carl

droid:
To be honest Carl, I was under the impression that the standard bolt can outperform some of the so called "upgrade" ones, so I will wait and see.

quickster47 †:
So the first results I will show are the average of those 240 pellets fired in batches of 30 pellets at a time.  This gun is not a hot shooter and I really suspect it is in the middle of the production bell curve.  Some will be better and some will be worse.

This is the OEM bolt/probe in brass as it come from Crosman.  Nothing done except a tiny drop of Pellgun oil on the o-ring.

Carl

Navigation

[0] Message Index

[#] Next page

Go to full version