Topic: Five Easy Probes

[TraderJoe]

Disclaimer: I am neither an engineer, a physicist, nor machinist. I also am not a "mod maniac" (a compliment to those of you who are  ). I have read every one of these posts and am truly impressed with the knowledge of all those who have contributed! Here is my bottom line question. I have a CCS 2240 (.22 cal) on order and from my understanding of what I've read is that one of the the simple mods I should do to improve performance is to replace the stock probe with a flow thru or extended probe. Also planning on a power adjuster. I will initially be shooting the 10' barrel but anticipate going to the LW 14.6 barrel. Thanks in advance for your comments.

[CraigH]

A return of my favorite project on CAPOF!   It is the reason I use the Mellon flow-through probe/bolt - sometimes "tuned" a bit.   Carl did excellent work on this!   

[Poorman Plinker]

Hi Trader Joe,
IMHO Carl did a great job on the research and longer probes not only increase velocity but increase standard deviation as well. Maybe not enough to affect close range accuracy. The hollow probes have a reputation of deforming the skirts as well (probably not all probes and not all skirts).

I have extended probes in most of my Crosman. I buy the Disco probes direct from them. I also use Disco striker springs (heavier gauge) that are cut short to reduce hammer bounce and save gas and reduce the standard deviation of shot velocity. But that is just me... does not work well for everyone.

The longer the barrel the more gas you can use... too much hammer or flow with short barrels is often a waste of shot count that produces very little overall efficiency (cumulative FPE divided by the number of shots within a % of FPS drop). But math is not for everybody either LOL.
 

[TraderJoe]

Well I guess at some point the length of the barrel falls under the "Law of Diminishing Returns"

[Nvreloader]

Just finished reading all of these posts, thoughts and info given etc, given by Carl and everyone else.
Outstanding test of these probes,   
I am interested in the hollow flow thru probe, for the upcoming mads to my QB 79, 22 caliber rifle.

Has anyone followed up with any more test results?

RIP Carl, you have earned it....as your actions have proven, beyond any shadow of doubt. 

Tia,
Don

[Termite]

I'm a relatively new member and just read this entire Post.  The exhaustive work that Carl did is simply amazing.  I wish I'd had the chance to get to know Carl.  From reading this post I can tell he was a great guy!

[CraigH]

Terminte,

Thanks for bringing this topic to the forefront.   Your comments, all true, are appreciated.