Author Topic: Latest Crosman parts cost and a question  (Read 18927 times)

0 Members and 1 Guest are viewing this topic.

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1052
  • Joined CAPOF since: 01/03/2016
    YearsYears
Re: Latest Crosman parts cost and a question
« Reply #45 on: May 21, 2018, 08:55:14 PM »
Do (will) you have both Discovery hammer springs from which the specs can be measured?
Craig
Lone Tree, Colorado

Beeman QB78D .22 -  Beeman Chief .22 - Beeman P17
Benjamin Marauder Pistol
Benjamin Maximus Hunter
Benjamin Wildfire
2240 Carbines (2) Stock Pistol (1)
1322C 18" Carbine Steel Breech FTP Prod Trigger
1377 Phase2 Stock
CCS 2400KT .22 14.6" LW "Verminator"
2100B
1077
Gano Urban
Ruger Mark I
PP700S-A .22
Umarex M712    Umarex P.08

Vintage
Crosman 130 - 150 - 180 - 600 - Mark I - 38C ; .22's
Hahn Super BB Repeater

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 261
  • Joined CAPOF since: 22/02/2017
    Years
Re: Latest Crosman parts cost and a question
« Reply #46 on: May 21, 2018, 09:46:37 PM »
The new Disco spring will replace one from a hardware store, so all I will have is the new one. FWIW, I read (but haven't verified) that there were three different Disco hammer spring part numbers- the two above and 1761-009.

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 261
  • Joined CAPOF since: 22/02/2017
    Years
Re: Latest Crosman parts cost and a question
« Reply #47 on: May 21, 2018, 10:58:25 PM »
Synthetic Shoulder Stock                                1399A001      $11.75
Seal, End .515 .170 .140- Pro-Top, etc.     38-128      $3.45
Piercing Pin- Pro-Top, etc.                    T4-041      $2.64
Assy, FO Front Sight-          760               760-201      $1.54
Grip, Left -Crosman -         1701P               1700-031      $3.48
Grip, Right -Crosman-      1701P               1700-032      $3.48
Setscrew, 4-40x.125, Flat Pt- 1701P            1701-025      $1.15
Brake, Muzzle-                    1701P             1701-023      $23.76
Sight Post-                          1701P           1701-024      $14.40
Mount, Front Sight-               Disco           1761-024      $9.30
Sight, Front Williams FO 70927- Disco     1761-025      $12.75
Spring, Hammer-                  Disco            2261A009      $1.30
Blade Sight-                         2240             788-101      $2.95
Chamber Plug, Face-          2240, etc.        G397-012      $2.30
Seal, Face .260 .165 .085- 2240, etc.     130-036      $2.30
Safety Spring, Cmprsn .015 MUW .31- 2240, etc.     1322-017      $1.15
Screw, Valve-                   2240, etc.          151-015      $1.15
TP Sleeve-                        2240, etc.          1322A026        $1.15
Sear, STP Pistol-               2240, etc.          1322A048         $1.15
Safety,.187 Dia Nylon-      2240, etc.           1322-052       $1.46
Valve Assembly, 2250B-    2240, etc.        2250-003      $10.32
Assembly, muzzle brake-   2300S               2300-121      $18.85
Assembly, Pressure Adjust- 2300S              2300-124      $15.61
Rear Sight- Benjamin Trail NP pistol BBP77 S3-02-00A   $6.70

ETA- Shipping was still just $4.00. Gotta love that8)
« Last Edit: May 22, 2018, 07:11:27 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 261
  • Joined CAPOF since: 22/02/2017
    Years
Re: Latest Crosman parts cost and a question
« Reply #48 on: May 27, 2018, 02:10:56 AM »
I would guess that you will need to oeder each of the parts shown. Normally, it will say "assy" for an assembly.
 
This is a nice front site with the ability to turn the post for a thinner or thicker view.
You are right- I did need all the listed parts. But wow was I surprised when I got looking a little closer and found either a typo or the most expensive sight post in existence!
« Last Edit: May 27, 2018, 02:44:23 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 261
  • Joined CAPOF since: 22/02/2017
    Years
Re: Latest Crosman parts cost and a question
« Reply #49 on: May 27, 2018, 02:40:58 AM »
Please disregard.
« Last Edit: May 27, 2018, 02:42:25 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 261
  • Joined CAPOF since: 22/02/2017
    Years
Re: Latest Crosman parts cost and a question
« Reply #50 on: August 23, 2018, 03:12:51 PM »
Do (will) you have both Discovery hammer springs from which the specs can be measured?
Sorry I took so long to get back w/this. I believe the following is correct- I know for the spring I have (bottom spring) the specs are correct.

Disco (previously called the “new” hammer spring): 16 coils, 2.25" OAL, 0.035” wire
Disco Hammer spring p/n 2261A009 bought 6-2018: 1.65” OAL, 0.282” OD, 0.043” wire

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1052
  • Joined CAPOF since: 01/03/2016
    YearsYears
Re: Latest Crosman parts cost and a question
« Reply #51 on: August 23, 2018, 06:16:03 PM »
That looks good, Mark.    I had 0.042" wire in my spread sheet, but remeasuring, it is 0.043".
Craig
Lone Tree, Colorado

Beeman QB78D .22 -  Beeman Chief .22 - Beeman P17
Benjamin Marauder Pistol
Benjamin Maximus Hunter
Benjamin Wildfire
2240 Carbines (2) Stock Pistol (1)
1322C 18" Carbine Steel Breech FTP Prod Trigger
1377 Phase2 Stock
CCS 2400KT .22 14.6" LW "Verminator"
2100B
1077
Gano Urban
Ruger Mark I
PP700S-A .22
Umarex M712    Umarex P.08

Vintage
Crosman 130 - 150 - 180 - 600 - Mark I - 38C ; .22's
Hahn Super BB Repeater