Author Topic: Latest Crosman parts cost and a question  (Read 49312 times)

0 Members and 4 Guests are viewing this topic.

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1758
Re: Latest Crosman parts cost and a question
« Reply #45 on: May 21, 2018, 08:55:14 PM »
Do (will) you have both Discovery hammer springs from which the specs can be measured?
Craig
Lone Tree, Colorado

With freedom comes a terrible responsibility

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 290
Re: Latest Crosman parts cost and a question
« Reply #46 on: May 21, 2018, 09:46:37 PM »
The new Disco spring will replace one from a hardware store, so all I will have is the new one. FWIW, I read (but haven't verified) that there were three different Disco hammer spring part numbers- the two above and 1761-009.

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 290
Re: Latest Crosman parts cost and a question
« Reply #47 on: May 21, 2018, 10:58:25 PM »
Synthetic Shoulder Stock                                1399A001      $11.75
Seal, End .515 .170 .140- Pro-Top, etc.     38-128      $3.45
Piercing Pin- Pro-Top, etc.                    T4-041      $2.64
Assy, FO Front Sight-          760               760-201      $1.54
Grip, Left -Crosman -         1701P               1700-031      $3.48
Grip, Right -Crosman-      1701P               1700-032      $3.48
Setscrew, 4-40x.125, Flat Pt- 1701P            1701-025      $1.15
Brake, Muzzle-                    1701P             1701-023      $23.76
Sight Post-                          1701P           1701-024      $14.40
Mount, Front Sight-               Disco           1761-024      $9.30
Sight, Front Williams FO 70927- Disco     1761-025      $12.75
Spring, Hammer-                  Disco            2261A009      $1.30
Blade Sight-                         2240             788-101      $2.95
Chamber Plug, Face-          2240, etc.        G397-012      $2.30
Seal, Face .260 .165 .085- 2240, etc.     130-036      $2.30
Safety Spring, Cmprsn .015 MUW .31- 2240, etc.     1322-017      $1.15
Screw, Valve-                   2240, etc.          151-015      $1.15
TP Sleeve-                        2240, etc.          1322A026        $1.15
Sear, STP Pistol-               2240, etc.          1322A048         $1.15
Safety,.187 Dia Nylon-      2240, etc.           1322-052       $1.46
Valve Assembly, 2250B-    2240, etc.        2250-003      $10.32
Assembly, muzzle brake-   2300S               2300-121      $18.85
Assembly, Pressure Adjust- 2300S              2300-124      $15.61
Rear Sight- Benjamin Trail NP pistol BBP77 S3-02-00A   $6.70

ETA- Shipping was still just $4.00. Gotta love that8)
« Last Edit: May 22, 2018, 07:11:27 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 290
Re: Latest Crosman parts cost and a question
« Reply #48 on: May 27, 2018, 02:10:56 AM »
I would guess that you will need to oeder each of the parts shown. Normally, it will say "assy" for an assembly.
 
This is a nice front site with the ability to turn the post for a thinner or thicker view.
You are right- I did need all the listed parts. But wow was I surprised when I got looking a little closer and found either a typo or the most expensive sight post in existence!
« Last Edit: May 27, 2018, 02:44:23 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 290
Re: Latest Crosman parts cost and a question
« Reply #49 on: May 27, 2018, 02:40:58 AM »
Please disregard.
« Last Edit: May 27, 2018, 02:42:25 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 290
Re: Latest Crosman parts cost and a question
« Reply #50 on: August 23, 2018, 03:12:51 PM »
Do (will) you have both Discovery hammer springs from which the specs can be measured?
Sorry I took so long to get back w/this. I believe the following is correct- I know for the spring I have (bottom spring) the specs are correct.

Disco (previously called the “new” hammer spring): 16 coils, 2.25" OAL, 0.035” wire
Disco Hammer spring p/n 2261A009 bought 6-2018: 1.65” OAL, 0.282” OD, 0.043” wire

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1758
Re: Latest Crosman parts cost and a question
« Reply #51 on: August 23, 2018, 06:16:03 PM »
That looks good, Mark.    I had 0.042" wire in my spread sheet, but remeasuring, it is 0.043".
Craig
Lone Tree, Colorado

With freedom comes a terrible responsibility

Offline jebhoge

  • Marksman
  • ***
  • Posts: 61
Re: Latest Crosman parts cost and a question
« Reply #52 on: February 01, 2019, 09:01:00 PM »
Some price updates; ordered today:

P-Rod Forestock, 2220-002, $5.30
Screw, 8-32 X .375, BHCS, 2220-003, $1.15
Screw, 8-32 X .437, SHCS, 2220-005, $1.15
Hammer Spring Guide, 2300-040, $6.45
P-Rod Forestock Mounting Bracket, 2220-007, $5.20
1701p Grip Frame, 2220-103, $37.00
2250B Barrel Band, 2250-007, $6.60

Also, the Crosman Custom Shop 18" .177 barrel is $22 but I didn't grab it at this moment. I also needed the .177 bolt assembly but it was out of stock.

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1758
Re: Latest Crosman parts cost and a question
« Reply #53 on: February 01, 2019, 11:06:39 PM »
Good to see the price of grip frame assembly 2220-103 is holding at a reasonable price.   Thanks for the update!
Craig
Lone Tree, Colorado

With freedom comes a terrible responsibility

Offline jebhoge

  • Marksman
  • ***
  • Posts: 61
Re: Latest Crosman parts cost and a question
« Reply #54 on: February 08, 2019, 09:17:37 PM »
WOW...that 18" barrel is actually $22 SHIPPED. I guess because of size, it's more expensive to ship, but the barrel itself is about $10.

Offline KevinP

  • Crosmaniac
  • *****
  • Posts: 6716
  • Reality is a prison
Re: Latest Crosman parts cost and a question
« Reply #55 on: February 09, 2019, 02:31:51 PM »
WOW...that 18" barrel is actually $22 SHIPPED. I guess because of size, it's more expensive to ship, but the barrel itself is about $10.

Perhaps that is the LW barrel ?
Kevin
Albany, New York

Offline jebhoge

  • Marksman
  • ***
  • Posts: 61
Re: Latest Crosman parts cost and a question
« Reply #56 on: February 09, 2019, 04:13:20 PM »
No, the LW barrel would be more than that, I'm sure. I was exclaiming on the lowness of the price for an 18" barrel.

Offline arkmaker †

  • Mods
  • Crosmaniac
  • ******
  • Posts: 10638
  • PASSED NOVEMBER 2020
Re: Latest Crosman parts cost and a question
« Reply #57 on: March 26, 2019, 04:13:45 PM »
I just bought a 18" . 22 Barrel from Crosman. Cost $14.25 and shipping was $17.35. I had some other stuff in there but they said it was the barrel that drove up the shipping costs.


Have they gone away from the flat $4.00 date on everything?? I Should have asked...
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 290
Re: Latest Crosman parts cost and a question
« Reply #58 on: March 26, 2019, 04:22:47 PM »
IIRC, barrels don't fall under the $4 shipping. And I seem to recall metal breeches or breech 'kits' didn't either, but I'm hazy on that.

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1758
Re: Latest Crosman parts cost and a question
« Reply #59 on: March 26, 2019, 07:51:48 PM »
I think it's only on barrels - call them to be sure.
Craig
Lone Tree, Colorado

With freedom comes a terrible responsibility