Author Topic: Latest Crosman parts cost and a question  (Read 27771 times)

0 Members and 1 Guest are viewing this topic.

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1251
Re: Latest Crosman parts cost and a question
« Reply #45 on: May 21, 2018, 08:55:14 PM »
Do (will) you have both Discovery hammer springs from which the specs can be measured?
Craig
Lone Tree, Colorado

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 282
Re: Latest Crosman parts cost and a question
« Reply #46 on: May 21, 2018, 09:46:37 PM »
The new Disco spring will replace one from a hardware store, so all I will have is the new one. FWIW, I read (but haven't verified) that there were three different Disco hammer spring part numbers- the two above and 1761-009.

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 282
Re: Latest Crosman parts cost and a question
« Reply #47 on: May 21, 2018, 10:58:25 PM »
Synthetic Shoulder Stock                                1399A001      $11.75
Seal, End .515 .170 .140- Pro-Top, etc.     38-128      $3.45
Piercing Pin- Pro-Top, etc.                    T4-041      $2.64
Assy, FO Front Sight-          760               760-201      $1.54
Grip, Left -Crosman -         1701P               1700-031      $3.48
Grip, Right -Crosman-      1701P               1700-032      $3.48
Setscrew, 4-40x.125, Flat Pt- 1701P            1701-025      $1.15
Brake, Muzzle-                    1701P             1701-023      $23.76
Sight Post-                          1701P           1701-024      $14.40
Mount, Front Sight-               Disco           1761-024      $9.30
Sight, Front Williams FO 70927- Disco     1761-025      $12.75
Spring, Hammer-                  Disco            2261A009      $1.30
Blade Sight-                         2240             788-101      $2.95
Chamber Plug, Face-          2240, etc.        G397-012      $2.30
Seal, Face .260 .165 .085- 2240, etc.     130-036      $2.30
Safety Spring, Cmprsn .015 MUW .31- 2240, etc.     1322-017      $1.15
Screw, Valve-                   2240, etc.          151-015      $1.15
TP Sleeve-                        2240, etc.          1322A026        $1.15
Sear, STP Pistol-               2240, etc.          1322A048         $1.15
Safety,.187 Dia Nylon-      2240, etc.           1322-052       $1.46
Valve Assembly, 2250B-    2240, etc.        2250-003      $10.32
Assembly, muzzle brake-   2300S               2300-121      $18.85
Assembly, Pressure Adjust- 2300S              2300-124      $15.61
Rear Sight- Benjamin Trail NP pistol BBP77 S3-02-00A   $6.70

ETA- Shipping was still just $4.00. Gotta love that8)
« Last Edit: May 22, 2018, 07:11:27 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 282
Re: Latest Crosman parts cost and a question
« Reply #48 on: May 27, 2018, 02:10:56 AM »
I would guess that you will need to oeder each of the parts shown. Normally, it will say "assy" for an assembly.
 
This is a nice front site with the ability to turn the post for a thinner or thicker view.
You are right- I did need all the listed parts. But wow was I surprised when I got looking a little closer and found either a typo or the most expensive sight post in existence!
« Last Edit: May 27, 2018, 02:44:23 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 282
Re: Latest Crosman parts cost and a question
« Reply #49 on: May 27, 2018, 02:40:58 AM »
Please disregard.
« Last Edit: May 27, 2018, 02:42:25 AM by cobalt327 »

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 282
Re: Latest Crosman parts cost and a question
« Reply #50 on: August 23, 2018, 03:12:51 PM »
Do (will) you have both Discovery hammer springs from which the specs can be measured?
Sorry I took so long to get back w/this. I believe the following is correct- I know for the spring I have (bottom spring) the specs are correct.

Disco (previously called the “new” hammer spring): 16 coils, 2.25" OAL, 0.035” wire
Disco Hammer spring p/n 2261A009 bought 6-2018: 1.65” OAL, 0.282” OD, 0.043” wire

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1251
Re: Latest Crosman parts cost and a question
« Reply #51 on: August 23, 2018, 06:16:03 PM »
That looks good, Mark.    I had 0.042" wire in my spread sheet, but remeasuring, it is 0.043".
Craig
Lone Tree, Colorado

Offline jebhoge

  • Marksman
  • ***
  • Posts: 59
Re: Latest Crosman parts cost and a question
« Reply #52 on: February 01, 2019, 09:01:00 PM »
Some price updates; ordered today:

P-Rod Forestock, 2220-002, $5.30
Screw, 8-32 X .375, BHCS, 2220-003, $1.15
Screw, 8-32 X .437, SHCS, 2220-005, $1.15
Hammer Spring Guide, 2300-040, $6.45
P-Rod Forestock Mounting Bracket, 2220-007, $5.20
1701p Grip Frame, 2220-103, $37.00
2250B Barrel Band, 2250-007, $6.60

Also, the Crosman Custom Shop 18" .177 barrel is $22 but I didn't grab it at this moment. I also needed the .177 bolt assembly but it was out of stock.

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1251
Re: Latest Crosman parts cost and a question
« Reply #53 on: February 01, 2019, 11:06:39 PM »
Good to see the price of grip frame assembly 2220-103 is holding at a reasonable price.   Thanks for the update!
Craig
Lone Tree, Colorado

Offline jebhoge

  • Marksman
  • ***
  • Posts: 59
Re: Latest Crosman parts cost and a question
« Reply #54 on: February 08, 2019, 09:17:37 PM »
WOW...that 18" barrel is actually $22 SHIPPED. I guess because of size, it's more expensive to ship, but the barrel itself is about $10.

Offline KevinP

  • Crosmaniac
  • *****
  • Posts: 6310
  • Reality is a prison
Re: Latest Crosman parts cost and a question
« Reply #55 on: February 09, 2019, 02:31:51 PM »
WOW...that 18" barrel is actually $22 SHIPPED. I guess because of size, it's more expensive to ship, but the barrel itself is about $10.

Perhaps that is the LW barrel ?
Kevin
Albany, New York

Offline jebhoge

  • Marksman
  • ***
  • Posts: 59
Re: Latest Crosman parts cost and a question
« Reply #56 on: February 09, 2019, 04:13:20 PM »
No, the LW barrel would be more than that, I'm sure. I was exclaiming on the lowness of the price for an 18" barrel.

Offline arkmaker

  • Moderator
  • Crosmaniac
  • ******
  • Posts: 10378
  • Bull Shooter
    • Ye Ole Air Gun Shop
Re: Latest Crosman parts cost and a question
« Reply #57 on: March 26, 2019, 04:13:45 PM »
I just bought a 18" . 22 Barrel from Crosman. Cost $14.25 and shipping was $17.35. I had some other stuff in there but they said it was the barrel that drove up the shipping costs.


Have they gone away from the flat $4.00 date on everything?? I Should have asked...
I Am A Natural Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 1740 Pistol, 2240 Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT Carbine, 1377 Pistol, Umerex Fusion Rifle

Offline cobalt327

  • Crosmaniac
  • *****
  • Posts: 282
Re: Latest Crosman parts cost and a question
« Reply #58 on: March 26, 2019, 04:22:47 PM »
IIRC, barrels don't fall under the $4 shipping. And I seem to recall metal breeches or breech 'kits' didn't either, but I'm hazy on that.

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1251
Re: Latest Crosman parts cost and a question
« Reply #59 on: March 26, 2019, 07:51:48 PM »
I think it's only on barrels - call them to be sure.
Craig
Lone Tree, Colorado