Longer Bolt..

[TennX]

Im on a fixed income and over whelmed as to what u can do to AG's...I love to mod stuff but have short pockets......for a backyard plinker are there any real  benefits of putting longer bolts/probe in my guns..for example my 13xx /22xx guns...many thanks

[JMJinNC]

The extended probe will ensure that the pellet is completely past the transfer port and engaging the rifling. I think any gains seen will be minimal unless you are consistently blocking off the transfer port with a particular pellet.

JMJ

[BillK]

Here is a way to cheaply make an extended bolt.  I've done it and it works well.  This is by "cwlongshot".
http://www.gatewaytoairguns.org/GTA/index.php?topic=46684.msg438762#msg438762

I've always thought it helped power and accuracy by placing the pellet into the rifling.  I don't know if I'm right or wrong, it's just what I do.

[TennX]

Here is a way to cheaply make an extended bolt.  I've done it and it works well.  This is by "cwlongshot".
http://www.gatewaytoairguns.org/GTA/index.php?topic=46684.msg438762#msg438762

I've always thought it helped power and accuracy by placing the pellet into the rifling.  I don't know if I'm right or wrong, it's just what I do.

Nice write up, unfortunately I don't have all the necessary equipment to do it...Im getting an order together for Mellon Air, will add a bolt to it .....Ive got a huge garage, shame its not a proper shop... 

[BillK]

I did mine with a hand drill.  If you have a couple of the brass bolts a mistake doesn't mean that much.  If you wand some of theose bolts, just ask & I'll bet you get a ton.

[1377x]

Mellonair has the best(cheapest) prices on parts. I just ordered 3 days ago his turnaround time is 4-5 days before shipping but I got conformation my parts are in the mail.
His extended bolts are $12 and hollow probes $15-$18 can't recall exactly. The extended probe seats the pellet exactly where it needs to be and doesn't damage the pellets. They are stainless steel also they add 10-15 fps to the velocity.
His flat top pistons and valves are a total of $30 together where as most vendors charge $30 for just a valve or piston.
When on a budget look to mellonair. The wait is well worth it

[onebaddj]

Ill 2nd mellon air. I have his flat top piston and valve in my 1377 and well as long probe bolts in all 3 Crosman guns, 2 barrels from him and a few other parts.