Author Topic: Issue with my Crosman 1377  (Read 496 times)

0 Members and 1 Guest are viewing this topic.

Offline briant97

  • Newbie
  • *
  • Posts: 5
  • Joined CAPOF since: 01/01/2018
Issue with my Crosman 1377
« on: January 10, 2018, 06:34:11 AM »
I can't get it to shoot. I put a seal kit in it and oiled it just a bit near the pump cup.  It [/youtube] looses air like before but it won't shoot anything out the barrel.  I know this is pretty vague but don't know what else to say. I am trying to get this restored as it was my grandfather's.  We used to enjoy shooting it and now I want to do the same with my son.

Offline plasticclassic

  • Crosmaniac
  • *****
  • Posts: 366
  • Joined CAPOF since: 07/05/2012
    YearsYearsYearsYearsYearsYears
Re: Issue with my Crosman 1377
« Reply #1 on: January 10, 2018, 09:11:32 AM »
Did you replace the valve stem? If it's a brass stem it is bound to have dried up sealant in the back of it, and it will do exactly as you say, pump but not hold air, and not shoot anything out the barrel. You can replace the sealant with an oring, or put in a modern stem. The new stem is a very cheap part from Crosman. Don't give up on the gun you and your grandfather loved together. It is almost certainly repairable back to it's original functionality. ☺

Offline briant97

  • Newbie
  • *
  • Posts: 5
  • Joined CAPOF since: 01/01/2018
Re: Issue with my Crosman 1377
« Reply #2 on: January 14, 2018, 09:31:32 PM »
I have not replaced the valve stem but I have replaced the o-rings on the end and the inside and that did not help.  I did see one on eBay but it was 29 dollars so I have not ordered it.  I think that one is for more performance.  I will call Crosman and see.  Funny you said the same thing my mom did don't give up on it.
« Last Edit: January 14, 2018, 09:32:07 PM by briant97 »

Offline plasticclassic

  • Crosmaniac
  • *****
  • Posts: 366
  • Joined CAPOF since: 07/05/2012
    YearsYearsYearsYearsYearsYears
Re: Issue with my Crosman 1377
« Reply #3 on: January 15, 2018, 01:32:51 AM »
A new valve stem is probably 2-3 bucks at Crosman plus 4.00 flat shipping.

Replacement orings are 1.15 each (as of 03-2017), if you want to grab some spares of those. Order all the parts you want for 4.00 flat shipping.

It generally takes about 5 business days for me to get my Crosman order.

Offline BillK

  • Crosmaniac
  • *****
  • Posts: 1975
  • Joined CAPOF since: 10/05/2013
    YearsYearsYearsYearsYears
Re: Issue with my Crosman 1377
« Reply #4 on: January 15, 2018, 01:51:00 AM »
A new valve stem is probably 2-3 bucks at Crosman plus 4.00 flat shipping.

Replacement orings are 1.15 each (as of 03-2017), if you want to grab some spares of those. Order all the parts you want for 4.00 flat shipping.

It generally takes about 5 business days for me to get my Crosman order.

^^Agreed^^  You could just get a complete valve from Crosman for $10. or so & repair the old one when you can.
West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260
1322 - 1377
MK I & II

Offline briant97

  • Newbie
  • *
  • Posts: 5
  • Joined CAPOF since: 01/01/2018
Re: Issue with my Crosman 1377
« Reply #5 on: January 15, 2018, 06:48:32 AM »
Thanks guys I'll be ordering tomorrow.

Offline mudduck48

  • Crosmaniac
  • *****
  • Posts: 5656
  • Joined CAPOF since: 09/09/2012
    YearsYearsYearsYearsYearsYears
Re: Issue with my Crosman 1377
« Reply #6 on: January 15, 2018, 04:03:59 PM »
The green goop dies, dig out the green goop then put an O-ring in it and enjoy. :)
We need to keep going and have fun doing it.

Offline briant97

  • Newbie
  • *
  • Posts: 5
  • Joined CAPOF since: 01/01/2018
Re: Issue with my Crosman 1377
« Reply #7 on: January 15, 2018, 10:27:17 PM »
There is no green goop left and where do I get that o-ring needed?

Brian

Offline ped

  • Crosmaniac
  • *****
  • Posts: 1928
  • Joined CAPOF since: 11/08/2012
    YearsYearsYearsYearsYearsYears
Re: Issue with my Crosman 1377
« Reply #8 on: January 15, 2018, 10:59:55 PM »
bs008 fits those type stems but better just fitting the new style acetal stem

Offline plasticclassic

  • Crosmaniac
  • *****
  • Posts: 366
  • Joined CAPOF since: 07/05/2012
    YearsYearsYearsYearsYearsYears
Re: Issue with my Crosman 1377
« Reply #9 on: January 15, 2018, 11:07:17 PM »
   

Brian97, I meant to tell you before that you can find the evp to get your part numbers at Crosman.com

https://support.crosman.com/hc/en-us/sections/200658070-Crosman-Air-Pistols

The date of your gun is stamped on the side of the air tube. It's a code but you can probably figure it out, looking for.month and year, followed by serial number.