Author Topic: Replacement 459MT Hex Screw  (Read 121 times)

0 Members and 1 Guest are viewing this topic.

Offline s2Kohio

  • Newbie
  • *
  • Posts: 2
Replacement 459MT Hex Screw
« on: December 16, 2019, 01:44:26 AM »
Anyone know the size of the 459MT hex screw. I’ve got one that’s almost stripped and I want to buy a few replacement screws.

Thx.

Offline BillK

  • Crosmaniac
  • *****
  • Posts: 2258
Re: Replacement 459MT Hex Screw
« Reply #1 on: December 16, 2019, 04:11:28 PM »
I don't recognize the description of the screw.  What - where is it used?
West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco - Prod
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260 - 1701P
1322 - 1377
MK I & II

Offline CraigH

  • Crosmaniac
  • *****
  • Posts: 1223
Re: Replacement 459MT Hex Screw
« Reply #2 on: December 16, 2019, 04:30:41 PM »
That is the Crosman Intermount which clamps onto the barrel.     I don not have one.    Don't think there is a manual for it a Crosman.

(Would not have the fastener spec anyhow)
Craig
Lone Tree, Colorado

Offline s2Kohio

  • Newbie
  • *
  • Posts: 2
Re: Replacement 459MT Hex Screw
« Reply #3 on: December 18, 2019, 03:12:44 AM »
OK, figured it out. The459MT intermount screw is an M3 15mm hex screw.
Went to hardware store and picked up a few. All they had was Phillips head, but it works well.

I followed another person’s suggestion (found on amazon review) and cut a few small pieces of old binocular neck strap (cloth) and placed each piece under the foot of each side of the mount - against the lower solid barrel of my 1322 - and it’s ROCK SOLID.  No movement or ‘rocking’ side to side. So, for $7.88 (Amazon) for the 459MT intermount and, if I buy a UTG Leapers MNT-PMTOWL-A Inc, Dovetail to Picatinny Adaptor Mount...$7.39 (Amazon) I’ll have a rock solid picatinny mount if I don’t want to use dovetail mount only.

Now to do the same thing on my 1377.

Offline KevinP

  • Crosmaniac
  • *****
  • Posts: 6271
  • Reality is a prison
Re: Replacement 459MT Hex Screw
« Reply #4 on: December 18, 2019, 05:38:36 AM »
Cool ideas you have ...   :-*
Kevin
Albany, New York