22xx front sight for TKO moderator

Started by 22Plinker, May 29, 2021, 09:10:22 PM

0 Members and 1 Guest are viewing this topic.

22Plinker

2300KT -22 cal. Inexpensive front sight using original front blade sight, set screw & epoxy on 10" Crosman barrel.
Carefully ream out till it fits snug on barrel. Just slide it back enough to secure TKO. I did not glue in place.
The small set screw allows perfect sight picture with plenty of adjustment for Williams notch rear sight.


KevinP

COOL .... one of those " why didn't I think of that "  !!! 
Kevin
Albany, New York

Luthier Vandros

Nice!  I'm running the same moderator on my 1322.  It's at least 75% quieter, though the owner told me his 6.5" really hits the sweet spot.
Best,

~F

"Ruining Good Moments Since 1975"

guitarsteve

Well done! A neat & effective solution.

BillK

West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco - Prod
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260 - 1701P
1322 - 1377
MK I & II

Dan762


KevinP

#6
Quote from: Dan762 on July 05, 2021, 01:47:11 PM
any info on that moderator ?
It is made by tko .....
Kevin
Albany, New York

Dan762


1377x

closed mouths dont get fed

Dan762

Does the use of the moderator affect velocity ?

Rezarf

Quote from: 22Plinker on May 29, 2021, 09:10:22 PM
2300KT -22 cal. Inexpensive front sight using original front blade sight, set screw & epoxy on 10" Crosman barrel.
The small set screw allows perfect sight picture with plenty of adjustment for Williams notch rear sight.

I was trying to think of a front Crosman sight that has a set screw holding it on the barrel, and then I realized the set screw is glued onto the sight blade to give you the extra height you needed for the Williams sight! I thought the set screw was what was holding the front sight in place, but as you said, it's just a tight fit on the reamed out plastic. Only taken me two weeks to gain enlightenment! Great mod!  :)