Author Topic: 22xx front sight for TKO moderator  (Read 440 times)

0 Members and 1 Guest are viewing this topic.

Offline 22Plinker

  • Newbie
  • *
  • Posts: 6
22xx front sight for TKO moderator
« on: May 29, 2021, 09:10:22 PM »
2300KT -22 cal. Inexpensive front sight using original front blade sight, set screw & epoxy on 10" Crosman barrel.
Carefully ream out till it fits snug on barrel. Just slide it back enough to secure TKO. I did not glue in place.
The small set screw allows perfect sight picture with plenty of adjustment for Williams notch rear sight.


Offline KevinP

  • Crosmaniac
  • *****
  • Posts: 6636
  • Reality is a prison
Re: 22xx front sight for TKO moderator
« Reply #1 on: May 29, 2021, 10:25:49 PM »
COOL .... one of those " why didn't I think of that "  !!! 
Kevin
Albany, New York

Offline Luthier Vandros

  • Newbie
  • *
  • Posts: 12
  • Down by your mom an them's
Re: 22xx front sight for TKO moderator
« Reply #2 on: June 25, 2021, 08:57:09 PM »
Nice!  I'm running the same moderator on my 1322.  It's at least 75% quieter, though the owner told me his 6.5" really hits the sweet spot.
Best,

~F

"Ruining Good Moments Since 1975"

Offline guitarsteve

  • Newbie
  • *
  • Posts: 27
Re: 22xx front sight for TKO moderator
« Reply #3 on: June 26, 2021, 11:23:12 AM »
Well done! A neat & effective solution.

Offline BillK

  • Crosmaniac
  • *****
  • Posts: 2565
Re: 22xx front sight for TKO moderator
« Reply #4 on: July 05, 2021, 05:13:32 AM »
Well done! A neat & effective solution.

X 2... :-*
West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco - Prod
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260 - 1701P
1322 - 1377
MK I & II

Offline Dan762

  • Newbie
  • *
  • Posts: 15
Re: 22xx front sight for TKO moderator
« Reply #5 on: July 05, 2021, 01:47:11 PM »
any info on that moderator ?

Offline KevinP

  • Crosmaniac
  • *****
  • Posts: 6636
  • Reality is a prison
Re: 22xx front sight for TKO moderator
« Reply #6 on: July 05, 2021, 01:48:44 PM »
any info on that moderator ?
It is made by tko .....
« Last Edit: July 05, 2021, 01:50:03 PM by KevinP »
Kevin
Albany, New York

Offline Dan762

  • Newbie
  • *
  • Posts: 15
Re: 22xx front sight for TKO moderator
« Reply #7 on: July 06, 2021, 03:49:09 PM »
Thank you Kevin

Offline 1377x

  • Moderator
  • Crosmaniac
  • ******
  • Posts: 14927
  • short list: wake up survive go to bed
Re: 22xx front sight for TKO moderator
« Reply #8 on: July 12, 2021, 08:06:27 PM »
great idea.
closed mouths dont get fed

Offline Dan762

  • Newbie
  • *
  • Posts: 15
Re: 22xx front sight for TKO moderator
« Reply #9 on: July 13, 2021, 10:45:22 PM »
Does the use of the moderator affect velocity ?

Offline Rezarf

  • Sharpshooter
  • ****
  • Posts: 191
Re: 22xx front sight for TKO moderator
« Reply #10 on: July 13, 2021, 11:11:03 PM »
2300KT -22 cal. Inexpensive front sight using original front blade sight, set screw & epoxy on 10" Crosman barrel.
The small set screw allows perfect sight picture with plenty of adjustment for Williams notch rear sight.

I was trying to think of a front Crosman sight that has a set screw holding it on the barrel, and then I realized the set screw is glued onto the sight blade to give you the extra height you needed for the Williams sight! I thought the set screw was what was holding the front sight in place, but as you said, it's just a tight fit on the reamed out plastic. Only taken me two weeks to gain enlightenment! Great mod!  :)