Author Topic: 1322 Medalist II (Post your Pics) & Info Requested - Thanks  (Read 4757 times)

0 Members and 1 Guest are viewing this topic.

Offline 0351_Vet

  • Crosmaniac
  • *****
  • Posts: 1266
  • Semper Fi - Marine Forever
    • Crosman Air Pistol Owners Forum
1322 Medalist II (Post your Pics) & Info Requested - Thanks
« on: January 15, 2012, 08:26:50 AM »
So....
Who has one?
How do you tell the age.
Who has rebuilt theirs? And the difficulty.

Tell me about the self cocking feature (And only six pumps)
It took me an hour to figure out it was self cocking.

Lastly, whats their value?

Thank's Crew.... Walt
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


Offline eric

  • Crosmaniac
  • *****
  • Posts: 2981
Re: 1322 Medalist II (Post your Pics) & Info Requested - Thanks
« Reply #1 on: January 15, 2012, 06:08:06 PM »
they are pretty simple --- just like the  current 13xx series .the max pumps is 10 like the current 13xx guns as well .any authorized crosman repair center should be able to reseal it or sell a seal kit .the quad seal which is a pisser is what fails most it is located IN a small brass piece hidden by the steel piece circled in red. not all models have the hole in the rear end cap --- only first variants i believe didn't have the hole probably due that the self cocking mechanism didn't always work and needed a push . they were made for only six years  --- 1970 thru 76 . as to their worth mabe up to 150 depending but more likely to be around 100 given on (decent) condition and such   
« Last Edit: January 15, 2012, 06:20:01 PM by eric »
TOO many freaks and NOT enough circuses

Offline 0351_Vet

  • Crosmaniac
  • *****
  • Posts: 1266
  • Semper Fi - Marine Forever
    • Crosman Air Pistol Owners Forum
Re: 1322 Medalist II (Post your Pics) & Info Requested - Thanks
« Reply #2 on: January 15, 2012, 06:26:17 PM »
Thanks Eric, Mine looks just like yours (well not as pretty) and it does have a rear hole.
I think it will need a seal job.My cost was $60 as it was purchased with the Backbacker
and I paid 120.00 for both. (So I figure $60.00 each)  :-*

The info you provided is very handy, I just downloaded the EVP on the pistol.
http://www.crosman.com/pdf/manuals/crosman/1300/C1300-EVP.pdf

Thanks again, Walt
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


Offline 0351_Vet

  • Crosmaniac
  • *****
  • Posts: 1266
  • Semper Fi - Marine Forever
    • Crosman Air Pistol Owners Forum
Re: 1322 Medalist II (Post your Pics) & Info Requested - Thanks
« Reply #3 on: January 15, 2012, 06:57:09 PM »
Check this out......This model has a forward breech extension to except a scope mount.

[youtube]https://www.youtube.com/watch?v=-MSsX4CsCug#]crosman 1322 medalist review[/url]

Anyone seen one like this or know where to get that piece?  ???
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ