1322 and Walmart

Started by seagullplayer, July 13, 2012, 02:15:09 PM

0 Members and 1 Guest are viewing this topic.

DHunter

Quote from: seagullplayer on July 26, 2012, 04:17:14 PM
Got to spend a little time with my new gun, made two adjustments to the open sights, painted the front blade site and she shoots where I aim.  Pretty happy, seems to pack a pretty good punch.
This will be my new woods buddy, not planning many external changes, at least not anything that will keep it from fitting my holster.   ;)


That was quite a few years ago, so let me make sure:  Is that the same one as https://www.crosman.com/elite-pistol-holster ?  If so, I'll order one.

cherokeesteve

Yes, that's it. I have one for my 1377, nice holster in my opinion.
I'm like a lactating mother...I don't mind pumping

1377 w/green dot/laser, 2240 modded, T4 modded, 2289 modded, M4-177 modded, 2400 KT in CO2 and HPA.

DHunter

Well, it arrived, but the 1322 does not fit through the hole in the bottom.  With some effort, I can get it to stick through the hole only about one inch, not five inches as shown in the picture.  The pump arm is much too big to fit through.  I could return it, but I really want this to work, so I might try to modify it.  Any comments welcome.

BillK

Quote from: seagullplayer on July 26, 2012, 06:47:10 PM
I have posted this before, but this is the holster in action, it works pretty good.  It is just the $7 crosman holster you get off the shelf, cut a few stitches out of the bottom, then I installed a black zip tie to keep it from ripping out further.  The pictures are my 1377 before I scoped it.






West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco - Prod
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260 - 1701P
1322 - 1377
MK I & II

DHunter

#34
Thankyou, BillK.   Somehow I had missed the part about the modification.  It looks easy enough though.  Thanks again.

Edit, a few weeks later:  Done.   :)

Flex

Love these revitalized threads :-*! Made me go to the shop and take my 1322 out and fondle it for a while ;). Too cold to go out shooting tho :(. Thread has a couple of topics that are frequent subjects of discussion, simple trigger mods and holsters for 13xx pumpers. I'm sure there are "stickies" for them but I'll comment anyway.

I did a simple trigger mod several years back that I found to improve the trigger action greatly!  Check out this link to the thread. https://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,9044.msg120143.html#msg120143
Not the equivalent of a p-rod trigger but an improvement to be sure :).

RE: making the Crosman holster for their AirSoft guns fit the 13xx series, indeed it is simple! The zip tie method is super simple but leaves that squarish chunk of plastic along the edge of the holster. I used a small carriage bolt, washer and nut arrangement. The smooth head of the carriage gives a touch of class IMHO ;). Kinda bulky on the back side and I had to carefully remove the excess bolt length and about half of the nut with my Dremel tool. (OK fine, less classy there and some extra work). Another option would be to use brass Chicago screws as that would look nice too.
Flex
Daisy Power Line 92
Crosman 781 Single-Pump rifle
Crosman Fury Break barrel springer
Crosman BackPacker 2289g
Crosman 1322c
Crosman 1377c
Crosman PowerMaster 760 SC
Crosman 1377 (2nd variant)
Crosman PumpMaster 760
Chinese B-3-? .177cal
Crosman 2240 (now .177 carbine hybrid)
Daisy 105 B
Crosman A*I*R 17 Single-Pump rifle (Phase I)
Crosman 140 .22cal rifle (Fourth Variant)
Black Ops "Exterminator" CO2  BB revolver
Chinese B 3-1 .22 cal
Bemjamin 132 .22 cal pump pistol
Hatsan TAC-BOSS 250XT CO2 BB pistol
Crosman 1008 RepeatAIR .177cal CO2 pellet pistol
Daisy 717 target pistol