New 1322c mods

[7624452]

You'll have to make one, have one maded, or find a phase II  pump tube.
http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,4523.msg61234.html#msg61234

That's a good job you did on your shim.  I have not done that because I do not have many tools or a proper workplace at my current location.  I might cure it by moving the long barrel to the 1377.

[1377x]

You'll have to make one, have one maded, or find a phase II  pump tube.
http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,4523.msg61234.html#msg61234

make a what im a little lost and cant seem to grasp whats going on here.its the meds i tell you
i can get phase 2 tubes still,at least the last time i checked they were still around.cant get the rear cocking hammer right now you got the last one available to me

[cmj21973]

make a what im a little lost and cant seem to grasp whats going on here.its the meds i tell you
i can get phase 2 tubes still,at least the last time i checked they were still around.cant get the rear cocking hammer right now you got the last one available to me

Hey 1377x:

If you look at the second picture, in the first post, you'll see a o-ring between the barrel band and the pump tube.
This is the one I made out of brass.
http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,4523.msg61234.html#msg61234

[1377x]

gotcha!
luckily none of my pumpers have had that issue
another solution is to add a screw to the barrel band behind the pivot pin as a stablizer
like this,been thinking about this mod for a couple years now
heres the full thread
http://www.network54.com/Forum/275684/message/1226290086/my+2289%27s+official+introduction+%28lotsa+pics%29

[7624452]

I can not tell exactly how that one is put together, but a screw in a plastic band would not be stong enough to last more than a few pumps.

[1377x]

the band is aluminum in the pic someone did do it with the plastic band it worked,they never reported back that it broke,but that doesnt mean it didnt
how its done is in the link
http://www.network54.com/Forum/275684/message/1226290086/my+2289%27s+official+introduction+%28lotsa+pics%29