How do you remove the Stamped-In writing off the 2240 Tube...????

Started by 0351_Vet, August 26, 2012, 02:44:27 AM

0 Members and 1 Guest are viewing this topic.

Crosshairs

Quote from: BDS on August 27, 2012, 02:59:55 PM
I like the solder idea Mike  :-*

That's what the real old school body repair guys used back in the day.
Yes i have worked with that many years ago. Maybe thats why i can't spell good. ;D
                                            Mike
Treat people the way you want to be treated, Life will be so much better !!!

BDS

Quote from: 0351_Vet on August 27, 2012, 04:24:04 AM
Thanks Brian, I figured if it were going to be DuraCoated, why buy a new one...?
BTW, what's Green Stuff?

Walt, before I forget, you will need to sand down the sharp/high spots on the engraving before using any filler or solder. Otherwise, the edges of the engrave will still be there after you add and sand down the filler material  :D
Brian

0351_Vet

WOW, I woke up this morning and all my questions about this subject were miraculously answered.
Thanks everyone. You guys are great.  :-*   :-*   :-*
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


BDS

The miraculous we do immediately, the easy stuff... takes weeks  :D
Brian

0351_Vet

Quote from: BDS on August 27, 2012, 04:53:59 PM
The miraculous we do immediately, the easy stuff... takes weeks :D

Too funny Brian..... :-*    :)  :)  :)  :)  :)
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ