.22 cal. barrel - what do I have?

Started by chongman, September 13, 2012, 03:46:10 AM

0 Members and 1 Guest are viewing this topic.

chongman

I got this .22 cal 10" barrel off of ebay awhile back. It looks really nice, clean, no rust at all.

Here's a couple of photos in the hopes someone can identify it's origins.





Trying to get together a 2240 to test fire the barrel but I need a few parts for it...working on it!
Long days and pleasant nights to you...

1377x

a pic of the leade and transfer port hole on the barrel will help
it could be a cut down disco barrel which is basically a 2260 barrel
closed mouths dont get fed

chongman

I hope this will do. i had the shakes last night and worse this morning so my photos suffered...it's the meds man  ???

Long days and pleasant nights to you...

eric

TOO many freaks and NOT enough circuses

Crosshairs

It sure looks a crosman barrel to me I don't think I have seen that type of break before.
Treat people the way you want to be treated, Life will be so much better !!!

chongman

Quote from: Crosshairs on September 13, 2012, 01:30:57 PM
It sure looks a crosman barrel to me I don't think I have seen that type of break before.

The break and sight were what sparked my interest.
Long days and pleasant nights to you...

BigErn

Cool barrel chong. It does look like a disco barrel with that wedge on the bottom for the tube.

0351_Vet

Disco Barrel.....Could be.
The front sight is definitely a Disco.  :-*
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


1377x

#8
even with your shaking you take a better pic than i do.i shake and wobble these days mostly due to the meds and loss of muscle from 3 months bed rest
back to the barrel
it looks like a crosman leade and barrel t/p.the front sight is definitely from a disco
so it could be a disco barrel which is the same as a 2260 barrel except there is a flat milled on the top of a disco barrel probably for the rear sight
is there a flat milled on top of the barrel?
meaning on the opposite side of the transfer port which would be the bottom.just trying to be as clear as possible
if there is no flat then it could be a 2260 barrel cut down or a 1322 barrel,if its a 2250 barrel then there should be a dimple on the top of the barrel for the barrel band set screw.im sure the dimple on a 2260 barrel would be cut off seeing the barrel is 10"
closed mouths dont get fed

chongman

Well, I took about 10 pictures to get that one! Dang if we're not having a tuff time of it.  I got the shakes from the meds and my kidneys are hurting this week because of the meds too  :( Somebody told me once "better living through chemistry".... Sometimes I don't think so  ??? Hang in there man, we'll get better!

There's no flat milled on the barrel but there is a dimple for the barrel band.

Long days and pleasant nights to you...

breakfastchef

Quote from: chongman on September 14, 2012, 01:24:55 AMSomebody told me once "better living through chemistry"...

I believe they were referring to 'different' chemicals. Hang in there!
Larry

1377x

Quote from: chongman on September 14, 2012, 01:24:55 AM
Well, I took about 10 pictures to get that one! Dang if we're not having a tuff time of it.  I got the shakes from the meds and my kidneys are hurting this week because of the meds too  :( Somebody told me once "better living through chemistry".... Sometimes I don't think so  ??? Hang in there man, we'll get better!

There's no flat milled on the barrel but there is a dimple for the barrel band.


you took the words right out of my mouth.now i know that im not the only one that feels that way.i have been on these meds only 8 months and think daily this going to be the rest of my life.im hanging in there :-*
  the dimple is it closer to the end of the  barrel? or closer to the breech? now that its been narrowed down to a 2250 or 2260 barrel
more importantly have you tried it out yet?
closed mouths dont get fed

chongman

The dimple lines up just right for a 2240 barrel band.

I'm going to shoot it this weekend..see how it goes and will let you know.
Long days and pleasant nights to you...

1377x

Quote from: chongman on September 14, 2012, 01:57:29 AM
The dimple lines up just right for a 2240 barrel band.

I'm going to shoot it this weekend..see how it goes and will let you know.
could possibly be a custom shop barrel then,unless someone made the dimple
stock 2250 and 2260 dimple are not anywhere close to the 2240 dimple
closed mouths dont get fed

0351_Vet

Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ