Topic: WHAT's IN YOUR FEDEX/UPS TRUCK?

[CraigH]

I received a goody bag of parts from Crosman.    Springs, Disco/Maximus end caps to make SSG's, other bits and pieces.

Perhaps it's me, but I get more satisfaction from my parts orders which are always right and delivered in a timely fashion, than seeing ads for the latest PCP's (high priced or low priced) which too often are delivered needing parts (from a manufacturer with poor support).

[crossliner]

I received a goody bag of parts from Crosman.    Springs, Disc/Maximus end caps to make SSG's, other bits and pieces.

Perhaps it's me, but I get more satisfaction from my parts orders which are always right and delivered in a timely fashion, than seeing ads for the latest PCP's (high priced or low priced) which too often are delivered needing parts (from a manufacturer with poor support).

Same here 

Crosman does it the old fashion way, which I find charming and poignant 

Still waiting for the parts that I ordered about 2 weeks ago, although one piece of the assortment that I ordered was delivered yesterday.

Perhaps some of those parts are in a BACKORDER mode but the lady did tell me they were in stock.

Odd 

Oh, I seem to recall we ordered parts at about the same time, Craig sir 

[mudduck48]

Nothing.

[KevinP]

A 20 x 60 x 80 spotting scope .......

[cherokeesteve]

1322 and 1399 shoulder stock. Will be doing a series of modification videos for my YouTube channel. I know it’s been done a million times, figured once more wouldn’t hurt. Plus will be giving it away to a channel subscriber once everything’s complete.

[KevinP]

A CREATIVE XP HD Red Dot Sight 3 MOA – Tactical Reflex Sight
 ( going on The Don )
$50 off on Amazon .... 

[KevinP]

OK.... SO.....

JEBHOGE posted this killer deal..

https://www.pyramydair.com/s/p/RWS_R_10_Match_Pistol_177_Cal_7_0_Grains_4_51mm_Wadcutter_500ct/1621

To good a deal not to get....

But I have this thing about getting free shipping.

so- I know I need counseling ...

On the way is stuff I don't really need, but must have ...   

10- rws r-10 match .177
JSB Diabolo  14.3, 18.13 and 15.89 in .22
H & N Slug 30 gr
and a 2240xl ------ I need this like a hole in the head, or should I say another 

[Sweller]

How about Amazon?

[jkingrph]

Basic 2240 to be rebuilt into a 1740.  Fed ex showed delivery to be Mar 12, will be Mar 15 at earliest.  I already have parts for a 1701p trigger.  Three screw breech and Lothar Walther barrel on order also.

[Rezarf]

3/32" ball bearings...last opening resulted in an errant safety ball escape. Tired of laying on the floor with the flashlight, and too lazy to cut off a pop bead from the fan pull chain...

[Sweller]

3/32" ball bearings...last opening resulted in an errant safety ball escape. Tired of laying on the floor with the flashlight, and too lazy to cut off a pop bead from the fan pull chain...

Have you got a dead hard drive? They have a magnet that puts DUPER in SUPER DUPER magnet! 

[Rezarf]

I may have to get one of those magnets -- and work over it! Unfortunately most of what I find is spent primers from the reloading press when I go looking on the floor

[Oldgunner43]

Not exactly a pellet pistol.....  Korth Mongoose

[Rezarf]

Very nice - presume it's a 357 Magnum? 2 cylinders? Is it like the Taurus with the 9mm cylinder? Didn't know Nighthawk did revolvers, just 1911's!

[crossliner]

13xx and hybrid 22xx/17xx with power adjusters offset-type AR adapters from Mr. Gipetto/Al of Canada:





Beautiful presentation and fantastic machining by one of my most favorite machinists in the planet 

I have 5 of his adapters, btw.

I will sell the non-offset one with no power adjuster as well as the RAI 13xx one:






Nothing wrong with them, actually, and both are in muy guapito condition.

The RAI 13xx one is too long (LOP by an inch) for my use, as I happen to utilize AR A2 buffer tubes.