WHAT's IN YOUR FEDEX/UPS TRUCK?

Started by BDS, September 24, 2012, 05:18:22 PM

0 Members and 33 Guests are viewing this topic.

1377x

#405
Quote from: BigErn on November 02, 2012, 01:13:00 PM
My new favorite word= Doofer  ;D
x2
i have been calling them doofers too ;D

Quote from: crossliner on November 02, 2012, 02:56:30 PM
When are you going to quit Mr. Droid?  :) Btw how does that Anthony trigger compare to the DC one? Also is that carbon fiber tough enough or does it easily peel off? Best regards.
if you asked me i think dc machine makes both the roller triggers
closed mouths dont get fed

BDS

Doofer: Noun, old english, derivative of doofenshusher (german). Often used to describe an item not otherwise able to be described easily. Also known as shshhy-stik, LDC, quiet tube, neighbor-be-gone (NBG).  :D
Brian

BDS

Quote from: droid on November 02, 2012, 01:08:39 PM
True, we may as well start a Mini Mike thread.

I may as well put my 2400 on then, just had a mild treatment so far as this is planned to be a ultra light carbine:



CS 2400 with droid engraving and Carbon look trim.
GMAC trigger kit with Anthony R alloy roller trigger
DC Safety
Custom Delrin Doofer
T R Robb Extended Probe and SS Bolt
BlueFork Alloy Breech and TruGlow Front Sight on the way
Muzzle-Mack extended CO2 cap to be modded for the 2400 tube

Gary

Photo of Gary's backyard  :D  ;D
Brian

BigErn


1377x

closed mouths dont get fed

droid

#410
That plane is taking all my money to the States for Crosmans  :-* :-*   ;)

The AR roller trigger is like Ed says very DC like, I suspect they are from the same machine.

Re the carbon finish, looks very well applied, in fact I can't see how they have done it. I wish the did pistol grips in this finish too.

Gary
Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk

BDS

It's hydro-graphics or hydro-dipping, same way that the camo and other finishes are applied. Only issue with the CF look graphics (film) is aligning the "weave" or fiber-look directions to be parallel with the part or edges.

Here's a couple links for you to peruse, the second link is a co. just 2 blocks from my work, I am gonna have them put the "burl wood" (BMW dashboard) film on a 1399 stock and 2289 fore-grip for my 1377 carbine.

http://en.wikipedia.org/wiki/Hydrographics_(printing)

http://www.hydro-dip.com/
Brian

droid

Quote from: BDS on November 02, 2012, 05:20:12 PM
It's hydro-graphics or hydro-dipping, same way that the camo and other finishes are applied. Only issue with the CF look graphics (film) is aligning the "weave" or fiber-look directions to be parallel with the part or edges.

Here's a couple links for you to peruse, the second link is a co. just 2 blocks from my work, I am gonna have them put the "burl wood" (BMW dashboard) film on a 1399 stock and 2289 fore-grip for my 1377 carbine.

http://en.wikipedia.org/wiki/Hydrographics_(printing)

http://www.hydro-dip.com/

Cheers Brian, that is so cool  :-* :-*

Gary
Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk

0351_Vet

Gary,

Crosman (Benji) did a few of these for the M-Rod and I was able to score one earlier this year.
Same process as the C/F look.

Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


BDS

Nice Walt, I'm likin this dip process more and more, gonna go "burl wood" on a 1377 carbine :-*
Brian

0351_Vet

Quote from: BDS on November 02, 2012, 07:03:08 PM
Nice Walt, I'm likin this dip process more and more, gonna go "burl wood" on a 1377 carbine :-*

If you are going to do it yourself, please take some photos of the process you use.
I too would like to play with the films myself.  :-*
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


bgmcgee

Good old usps dropped off my p-rod trigger group today. Not to bad ordered it from Crosman last Thursday and here today. Now all I need is my hammer from Mellon and the 1377 might be done for now.
"I've lost what's left of my right mind"

BDS

Two 2289 (black) pump handles and two 2240 F.O. front sights for the 10 meter shootin this winter, I've been havin an open-sights revival lately  :-*
Brian

Fronzdan

I know you've already ordered it, but you should try the JB Weld hammer method.  My last two I went that route.  It's easy and works great.

bgmcgee

#419
Thought about that but I really don't have the tools here to smooth it out. Plus this gives me time to dremel  off the mold marks on the new frame and let the paint dry real good before I need it.
"I've lost what's left of my right mind"