WHAT's IN YOUR FEDEX/UPS TRUCK?

Started by BDS, September 24, 2012, 05:18:22 PM

0 Members and 36 Guests are viewing this topic.

BDS

Quote from: Gippeto on April 12, 2013, 12:46:11 AM
That IS a nice little lathe...congrats Davio! :)

After a lengthy journey in the back of numerous FedEx trucks, the 1701P has made touch down in Alberta as of this afternoon....  :D

Thanks a bunch Arkmaker (Rich). :-*

Al

Meeting all Canadian fpe specs too ;)
Brian

Gippeto

But of course! :)

Have other stuff if I want a big hole...this is for small holes. ;)

Al

Davio

Quote from: chongman on April 11, 2013, 02:21:04 PM
Another dude joins the ranks of the Hobbyist Machinist  :-*

Outstanding David, keep it clean and shiny!

I have enlisted and have been issued my weapon. I will join the ranks, but boot camp first!  Much to learn.  I have had and used the very large wood lathe for many years, but there is vary little similarity between wood and metal lathe work. 

You know I will keep it clean and shiny since that is OCD shop rule #1.  I am going to take it nice and slow.

Today, UPS dropped off four book to read (three on lathes and one on mills). All are paper bound and quite inexpensive. 

One of them is called "The Home Machinist's Handbook" by Doug Briney.  It has ten projects given at the right point in the training to test skills before going on to the next ones.  The projects are for actually usable tool for the lathe (Center Punch, Machinist Jack, Brass Mallet, Ball Peen Hammer, Setup Tool, Parallel Bars, Machinist Clamp, Angle Plate, Sine Bar, and finally the only one that is not a tool... a Ship's Cannon final project)

The other three books are How to Run a Lathe (from South Bend), and two books from Harold Hall called Metal Lathe for the Home Machinist and Milling for Home Machinists.

Good times.  :)
Silence is golden. Duct Tape is silver. Gravy is brown.

2400KT bulk fed repeater .22
2260 .22 w/ steel breech
2250XE .22
Benjamin Discovery .22
Benjamin Marauder .25
Crosman 1077 WOOD .177
Crosman 1077 BLACK .177
Benjamin NP Trail .177
Crosman 2240 Camo .22
Crosman 2240 polished .22
Crosman 2300KT .22
Dan Wesson 8" .177
Crosman Vigilante .177
Hatsan A44PA .25
Hatsan A44W .25
Sheridan 2260
Benjamin Trail NP XL .25
Benjamin Titan NP .22
Benjamin Marauder Pistol .22
Benjamin 392 .22
Sheridan C9 PB 50th Anniversary .20
Crosman 1701-P .177

JEBert

Quoteand finally the only one that is not a tool... a Ship's Cannon final project)
All of the projects sound cool but this one is the COOLEST!   8)  You know, cause it SHOOTS!   :)  Well, unless it's just a replica.   :(
Jerry
NRA Life Member
USAF Veteran 1973-1977 (43151E) Sgt (E-4)


ped

we need to see the cannon when you get it made davio
good luck with you're machining and enjoy yourself
ped
I am also active on https://ukchineseairgunforum.com

Davio

Quote from: ped on April 12, 2013, 11:07:30 AM
we need to see the cannon when you get it made davio
good luck with you're machining and enjoy yourself
ped

Thanks, guys.  Hey, the cannon might have to be the Gauntlet II entry.  ;D
Silence is golden. Duct Tape is silver. Gravy is brown.

2400KT bulk fed repeater .22
2260 .22 w/ steel breech
2250XE .22
Benjamin Discovery .22
Benjamin Marauder .25
Crosman 1077 WOOD .177
Crosman 1077 BLACK .177
Benjamin NP Trail .177
Crosman 2240 Camo .22
Crosman 2240 polished .22
Crosman 2300KT .22
Dan Wesson 8" .177
Crosman Vigilante .177
Hatsan A44PA .25
Hatsan A44W .25
Sheridan 2260
Benjamin Trail NP XL .25
Benjamin Titan NP .22
Benjamin Marauder Pistol .22
Benjamin 392 .22
Sheridan C9 PB 50th Anniversary .20
Crosman 1701-P .177

Davio

Aluminum, Brass, Delrin and Stainless... oh, my!  Can you see the 32 muzzle brakes hiding in the picture?   ;)
Silence is golden. Duct Tape is silver. Gravy is brown.

2400KT bulk fed repeater .22
2260 .22 w/ steel breech
2250XE .22
Benjamin Discovery .22
Benjamin Marauder .25
Crosman 1077 WOOD .177
Crosman 1077 BLACK .177
Benjamin NP Trail .177
Crosman 2240 Camo .22
Crosman 2240 polished .22
Crosman 2300KT .22
Dan Wesson 8" .177
Crosman Vigilante .177
Hatsan A44PA .25
Hatsan A44W .25
Sheridan 2260
Benjamin Trail NP XL .25
Benjamin Titan NP .22
Benjamin Marauder Pistol .22
Benjamin 392 .22
Sheridan C9 PB 50th Anniversary .20
Crosman 1701-P .177

Tater

Quote from: Davio on April 13, 2013, 05:55:54 AM
Aluminum, Brass, Delrin and Stainless... oh, my!  Can you see the 32 muzzle brakes hiding in the picture?   ;)

I see 'em!!!!   :D
Jerry

NW Chicago suburbs

droid

Quote from: Davio on April 13, 2013, 05:55:54 AM
Aluminum, Brass, Delrin and Stainless... oh, my!  Can you see the 32 muzzle brakes hiding in the picture?   ;)

Yum yum - Gary spendy spendy  ;D
Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk

Fronzdan

Make the cannon able to accept the backpacker butt stock!!!!

Crosshairs

Quote from: Davio on April 13, 2013, 05:55:54 AM
Aluminum, Brass, Delrin and Stainless... oh, my!  Can you see the 32 muzzle brakes hiding in the picture?   ;)
I hear a lathe humming. Cool stuff.
Treat people the way you want to be treated, Life will be so much better !!!

quickster47 †

Those on the right side are gonna be really small muzzle brakes that's for sure.  :D

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

HappyHunter

16mm OD x 22" long Lothar Walther barrel (.22 cal)
Hatsan Air Stripper
2 extended bulk fill adapters for 2260/Disco from Joe @ HPA Sports
P-rod grip frame
24" & 30" x 7/8" OD CF tubes (1 each)


Todd
Todd


Don't sweat the petty things, and don't pet the sweaty things!

bgmcgee

got me a new chongman carbon handle,  it's very nice but what else comes from the man another stainless handle. Got to say thanks Michael. :-*
"I've lost what's left of my right mind"

1377x

just received a marauder trigger group and 2 fill nipple covers :o
now how the heck do you get the o-ring the covers? ??? >:(
closed mouths dont get fed