WHAT's IN YOUR FEDEX/UPS TRUCK?

Started by BDS, September 24, 2012, 05:18:22 PM

0 Members and 32 Guests are viewing this topic.

DaveB50

Crosman sent me a bare 1322 grip frame instead of the 1701P grip frame assy I ordered.  >:( Will have to give them a call in the morning. The part numbers aren't even close.  ???
Crosman 1740, 12" bbl., , 1701p trigger, TKO LDC
Crosman 2260, Barracuda stock, 18"bbl., ACC LDC
Sheridan Blue Streak '68
RWS/Hammerli 850 AirMagnum .22 cal
P17
Crosman 1077

DaveB50

I do like that barrel band, hope he makes some for the 2240 too.
Crosman 1740, 12" bbl., , 1701p trigger, TKO LDC
Crosman 2260, Barracuda stock, 18"bbl., ACC LDC
Sheridan Blue Streak '68
RWS/Hammerli 850 AirMagnum .22 cal
P17
Crosman 1077

quickster47 †

Quote from: DaveB50 on April 19, 2013, 04:41:57 AM
Crosman sent me a bare 1322 grip frame instead of the 1701P grip frame assy I ordered.  >:( Will have to give them a call in the morning. The part numbers aren't even close.  ???

I know you got it correct but this is the number Trigger Frame - 2220-103 you used, correct?

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

bgmcgee

Quote from: DaveB50 on April 19, 2013, 04:41:57 AM
Crosman sent me a bare 1322 grip frame instead of the 1701P grip frame assy I ordered.  >:( Will have to give them a call in the morning. The part numbers aren't even close.  ???
Seems like Crosman has done that a lot lately. My last order they sent me a 22xx valve instead of the power adjuster,  called them they told me they would ship the right part out a.s.a.p. well the day after they got the valve back from me they shipped my part. A week later on top of that they sent me 2 in 2 different envelopes.  I'm not sending the other one back since it took them a week to ship my right part that I know I ordered.
"I've lost what's left of my right mind"

Tater

Jerry

NW Chicago suburbs

1377x

Quote from: DaveB50 on April 19, 2013, 04:45:37 AM
I do like that barrel band, hope he makes some for the 2240 too.
the barrel band will fit any 2xxx or disco. in the thread on gta it is mounted on the disco
closed mouths dont get fed

quickster47 †

Quote from: 1377x on April 19, 2013, 08:11:38 AM
the barrel band will fit any 2xxx or disco. in the thread on gta it is mounted on the disco

Ed did you get yours from QVTom directly?

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

DaveB50

Quote from: quickster47 on April 19, 2013, 05:01:49 AM
I know you got it correct but this is the number Trigger Frame - 2220-103 you used, correct?

Carl

Yes that's the one I ordered, what I got was 1322B051. I just got off the phone with Crosman, there sending  the correct one right out.
Dave
Crosman 1740, 12" bbl., , 1701p trigger, TKO LDC
Crosman 2260, Barracuda stock, 18"bbl., ACC LDC
Sheridan Blue Streak '68
RWS/Hammerli 850 AirMagnum .22 cal
P17
Crosman 1077

KevinP

Quote from: Bill L. on April 18, 2013, 11:47:24 PM
My RWS 850  Air Magnum will be here Monday :). Thank God I didn't  have to wait 4 weeks like I had to for my Crosman custom :-*

I have been looking at this for a long time and feel it is a must have .................... somehow ...
Kevin
Albany, New York

JEBert

I just came from the mailbox with a package from Crosman.  I now have enough parts to turn my 2300KT into a 2250 (or a 2400KT)  except for a foregrip.  I haven't figured out what I want to do for a foregrip yet, maybe I'll make one.
Then I'll have enough left over parts to make a Gauntlet II entry.  I've been thinking about a 150 clone for quite a while now but I don't want to give too much of it away yet.
Cheers,
Jerry
NRA Life Member
USAF Veteran 1973-1977 (43151E) Sgt (E-4)


BDS

Quote from: KevinP on April 19, 2013, 06:05:04 PM
I have been looking at this for a long time and feel it is a must have .................... somehow ...

I hear ya Kevin, that 850 nags at me too, one of the few higher powered co2 guns out there.
Brian

1377x

Quote from: quickster47 on April 19, 2013, 01:37:50 PM
Ed did you get yours from QVTom directly?

Carl

yes
the band was made for me because of the hose clamp I had on my stainless 2260.
the 4-48 breech screw kept backing out by the 4th shot. I tried the stainless steel 4-48 screws I have and the stock 4-48 screw ,they all backed out. once I added the hose clamp to the breech as a make shift breech band QVTom saw that and said that wouldn't do on such a nice shooter. Tom, a few others and myself came up with the band as a replacement for the hose clamp. this weekend I will test the barrel band and if it makes the grade it will go into production. it needs to keep my poly port sealed and my 4-48 breech screw from backing out. if it does those thing it will get my nod. if not then its back to R&D for me
if you go to gta and read my stainless steel 2260 threadhttp://www.gatewaytoairguns.org/GTA/index.php?topic=39473.0  you will get more insight an how this band was developed. there is a new thread mentioned by Tater that QVTom started thats about the barrel band he made for me and hopefully if it pans out the first 20 will go to anodizing then more will be made as a production part. he wants to make a Crosman line of parts for sale. it's mentioned in my s/s 2260 thread there
closed mouths dont get fed

ped

if his other parts are the same quality as the band he's made for you they'll certainly be in demand
i've thought about using larger breech hold down screws or turning the front of the breech down so a band can be fitted but still be streamlined
ped
I am also active on https://ukchineseairgunforum.com

Tater

I can't wait to hear how the band works out for you Ed, it looks really cool. You would be able to change barrels without taking out the roll pin with that, correct?
Jerry

NW Chicago suburbs

1377x

Quote from: Tater on April 19, 2013, 09:40:58 PM
I can't wait to hear how the band works out for you Ed, it looks really cool. You would be able to change barrels without taking out the roll pin with that, correct?
this band is actually for a 2260 or any gun that shares the same set up like the rest of the 2xxx and disco
in my 2260 build thread on gta he asks what other parts would be of interest now is the time to start throwing ideas his way ;)
closed mouths dont get fed