Author Topic: 10 shot indexing mag,would it fit my 2300t  (Read 2264 times)

0 Members and 1 Guest are viewing this topic.

Offline sparkycrew

  • Newbie
  • *
  • Posts: 19
10 shot indexing mag,would it fit my 2300t
« on: October 06, 2012, 03:07:09 PM »
hy guys,just come across a 10 shot rotary mag for a benjamin discovery would this fit my crosman 2300t trying to insert a link but failed miserabley,if it does fit are any good do they jam and become frustrating things to use

Offline 0351_Vet

  • Crosmaniac
  • *****
  • Posts: 1266
  • Semper Fi - Marine Forever
    • Crosman Air Pistol Owners Forum
Re: 10 shot indexing mag,would it fit my 2300t
« Reply #1 on: October 06, 2012, 06:37:08 PM »
Simple answer, No, it won't work.
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


Offline arkmaker †

  • Mods
  • Crosmaniac
  • ******
  • Posts: 10638
  • PASSED NOVEMBER 2020
Re: 10 shot indexing mag,would it fit my 2300t
« Reply #2 on: October 06, 2012, 07:31:25 PM »
You will need an aftermarket breech like the one from BNM or a way to get your hands on a Marauder breech, in order for the rotary mag to work. Wish it were that easy though!!


http://bnm111.hpage.com/
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

Offline Fronzdan

  • Crosmaniac
  • *****
  • Posts: 952
Re: 10 shot indexing mag,would it fit my 2300t
« Reply #3 on: October 06, 2012, 08:02:27 PM »
You will need an aftermarket breech like the one from BNM or a way to get your hands on a Marauder breech, in order for the rotary mag to work. Wish it were that easy though!!


http://bnm111.hpage.com/

Is there a way to mount a Marauder breech on on a 2300 tube?

Offline arkmaker †

  • Mods
  • Crosmaniac
  • ******
  • Posts: 10638
  • PASSED NOVEMBER 2020
Re: 10 shot indexing mag,would it fit my 2300t
« Reply #4 on: October 06, 2012, 08:07:56 PM »
I think it can be done, but it would take a bit of work. Didn't someone on this forum do it a while back? maybe someone will pipe in on this



I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

Offline sparkycrew

  • Newbie
  • *
  • Posts: 19
Re: 10 shot indexing mag,would it fit my 2300t
« Reply #5 on: October 06, 2012, 10:34:20 PM »
shame but i had to ask,seen some home made inline mags that you manualy slide as the bolt is pulled back,does anyone know if this type is available off the shelf and without any breech mods

Offline arkmaker †

  • Mods
  • Crosmaniac
  • ******
  • Posts: 10638
  • PASSED NOVEMBER 2020
Re: 10 shot indexing mag,would it fit my 2300t
« Reply #6 on: October 06, 2012, 11:27:23 PM »
Again, no deal and I do not know of any aftermarket suppliers for it. I do have one drawn up that uses the same clip as the PM66  and M-417. Just never got around to making one  :(  As you say, manual feed after the bolt is drawn back.
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22