More ideas for my p-rod double build!

Started by woody67, October 19, 2012, 05:04:07 PM

0 Members and 1 Guest are viewing this topic.

woody67

Came up with an additional plan for my build/project...

With the p-rod double a new foregrip is needed, and comes with a triple barrel band. I plan on putting an airtube extension on the top airtube as well as the double tube...

So, with the barrel band and foregrip not in use, I realized that I can cut the section of the foregrip, and attach it with the barrel band on a section of the airtube extension. Under the foregrip section I will attach a weaver rail, and from there I will add a bipod.

Here's my quick 'Paint' drawup. Thanks for not making fun of them, I don't claim to be good at putting these pictures together!!

quickster47 †

Well that certainly is an interesting concept.  Have to wonder though if it would not have been cheaper to just get an M-Rod in the first place.

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

woody67

No need to wonder, it would have been WAAAY cheaper to get an M-rod, but I wanted a p-rod....and you know how things go.
You add one little piece here, take one away and swap it for something else, and before you know it you've put a grand into a $300 gun.

It's all fun though, and I like this better than if I had an m-rod.
Next up though might be a talon tuned mrod..

1377x

it seems like it would be lighter than a m-rod though
if they wasnt so heavy they wouldnt be half bad
closed mouths dont get fed

tinker

Go for it Woody,  it's called a custom and nobody else can have one!
(Tinker)
If it's not broken then modify it!

KevinP

Kevin
Albany, New York

bgmcgee

Looks cool and like was said before it's one of one.
"I've lost what's left of my right mind"