What work did you just do?

Started by Fronzdan, October 27, 2012, 04:25:40 PM

0 Members and 1 Guest are viewing this topic.

Fronzdan

I went on a bed liner binge. Painted two pairs of black plastic Crosman grips, an RB Grips pump arm, and a steel ldc that was scratched up.  Love this stuff.


PC77

Made a pair of brass 13xx pump arm pins.
pc


Trophyhunter49

  Worked on The Phoenix somr todad, And worked on my new shop!

Tater

With some help from Ed, I just installed a new steel breech on the 1377 and the red dot. The 6 month project is finally progressing! 



And with the lights on:



I think I need to do the 'ol "wax in the screw head trick", pellets are hanging up.
Jerry

NW Chicago suburbs

matty

^^Love my BSA Red Dot.  That looks great.

Have fun!


BigErn

Just finished testing the AIR17 with the sight adjustments I made and it's working perfectly! This project is done! Now to test the AM77 but it's very windy here still.

ped

fitted magpul copy stock to my heinz 57 build and machined sear spring guide for a 22xx
ped
I am also active on https://ukchineseairgunforum.com

Trophyhunter49

  ped that's a nice lookin shooter :-*

1377x

closed mouths dont get fed

jSan22

Quote from: ped on October 29, 2012, 10:24:03 PM
fitted magpul copy stock to my heinz 57 build and machined sear spring guide for a 22xx
ped
ped, that looks like a hunter! how much did it cost?

ped

i got the stock of e bay
its sold as a tippman bt4 and was £30 but it says magpul on it so i presume it's a chinese copy ,it's very well made and feels solid but only time will tell if it was a good buy
i'm happy with it
ped
I am also active on https://ukchineseairgunforum.com

targettgii

Tom

Modded 1377
Modded 2240
Modded 1322
1750 HPA pistol
Stock 2260(for now)
.22 Gen.2 Marauder
CCS 2300
Custom 1740
38 T

1377x

i just noticed the door in the back of the stock with extra magazine in it .very nice!!
what stock adapter are you using on the gun?
closed mouths dont get fed

ped

i made it ed, as the gas tube is made from the front of a qb78 tube i left it long at the rear and left the threads on
then i fastened the gas plug nut to the stock with an m12 cap head bolt ,it just screws on
ped
I am also active on https://ukchineseairgunforum.com

1377x

i keep forgetting thats based on a qb tube
i think this gun here is cool its also based on a qb tube
http://www.gatewaytoairguns.org/GTA/index.php/topic,37946.0/topicseen.html
closed mouths dont get fed