What work did you just do?

[Davio]

I found the thread I needed to be confident being more aggressive in getting the leade right on my 1322. 

Link or it does not exist !   

[Tater]

Looks good vertguy. How are you liking that bench?
I have the same one and love it.

[vertguy]

Looks good vertguy. How are you liking that bench?
I have the same one and love it.

I started another thread in General Airgunning with some feedback. But you can't beat the $80 price as it is nice and sturdy, along with being collapsible for easy storage.

[K.O.]

Link or it does not exist !   

http://www.gatewaytoairguns.org/GTA/index.php?topic=31208.0

[bgmcgee]

Got my 1377 tore apart again ready for another transformation.  . Figured I needed another .20 gun so it hopefully will soon be a 1320.

[Davio]

Got my 1377 tore apart again ready for another transformation.  . Figured I needed another .20 gun so it hopefully will soon be a 1320.

Where do you get the .20 barrels pray reveal!?   

[Bazmati2020]

Took my 1322 apart to work on trigger a bit more.  This time the safety spring was hanging out, foolishly I tried to pop back in with screwdriver  ping! I did find it again and separated grip from tube to put back properly.

I collapsed the sear sping with wife kitchen blow torch, actually did a bit too much and had to stretch out a bit more, but it seems to have lightened it just right.  Much smoother so that's pleased me.

Found a lighter today so am taking the seal out to put on top of TP.  I wasn't going to mod, but I'm slipping, have a bid in for a steel breech on the bay.  If I don't win I'm still going to buy one as I'd like to put my MIM sight on it and also a red dot (with rail I can used opend sights through as well.

Pondering switching to .177, would that lower power? I'd like a longer barrel so can have a  doofer but in .22 it's just too close to limit with stock barrel and set up, so wondering if .177 will reduce power so sticking a longer barrel becomes possible again?

Thanks

[bgmcgee]

Where do you get the .20 barrels pray reveal!?   

Spent to much and picked it up on the yellow.  It's a one off type,supposed to be a lothar. It is quite nice though. Should have it up and shooting after the holiday.

[ped]

Took my 1322 apart to work on trigger a bit more.  This time the safety spring was hanging out, foolishly I tried to pop back in with screwdriver  ping! I did find it again and separated grip from tube to put back properly.

I collapsed the sear sping with wife kitchen blow torch, actually did a bit too much and had to stretch out a bit more, but it seems to have lightened it just right.  Much smoother so that's pleased me.

Found a lighter today so am taking the seal out to put on top of TP.  I wasn't going to mod, but I'm slipping, have a bid in for a steel breech on the bay.  If I don't win I'm still going to buy one as I'd like to put my MIM sight on it and also a red dot (with rail I can used opend sights through as well.

Pondering switching to .177, would that lower power? I'd like a longer barrel so can have a  doofer but in .22 it's just too close to limit with stock barrel and set up, so wondering if .177 will reduce power so sticking a longer barrel becomes possible again?

Thanks

that might do it but other options with a 14" .22 barrel would be to use a uk spec 2240 tp bush or try a hammer spring from a 2240
ped

[KevinP]

Well doing ... cold as crap here with the wind ...
gonna start working on the basement .....
cleaning out and man cave stuff .....   

Anybody in the Albany, NY area that wants computer stuff pm me,
have a lot of parts ....

[bgmcgee]

Got the 1320 shooting.  Still needs work but parts are a coming.  Started a new thread about it.

[ped]

reset the power on my bluestreak the blow of valve was a bit vague at how many pumps it opened(later uk spec one)some times 6 and sometimes 8 giving power levels a bit too close to naughty for the uk
biggest culprit was the head space wasn't correct but a spring washer added to the blowoff valve by the previous owner didn't help
also added a doofer and adapter i aquired a bit back now shooting at 10fpe @ 5 pumps which is fine for a bit of plinkin
ped

[BDS]

ped old-boy, how about some photos of that doofer & adaptor?

Not many folks on this side of the pond have seen nor been able to find Benji 39X doofer adaptors

[arkmaker †]

ped old-boy, how about some photos of that doofer & adaptor?

Not many folks on this side of the pond have seen nor been able to find Benji 39X doofer adaptors

Here's one way;
http://www.network54.com/Forum/275684/thread/1270153289/1270170799/Benji+39x+muzzle+break-LDC+adapter+tutorial+%28pics%29

[K.O.]

got tired of the 1377 front sight so cut it 2/3  down drilled it and used a 1/4 screw eye for a  front peep...

squeezed it closed  an perm marker black fits just inside rear peep...