Author Topic: 10.1" Lothar Walther Match Barrel  (Read 13116 times)

0 Members and 1 Guest are viewing this topic.

Offline quickster47 †

  • Crosmaniac
  • *****
  • Posts: 11633
  • PASSED JULY 14, 2016
    • Much Ado About Nothing
Re: 10.1" Lothar Walther Match Barrel
« Reply #15 on: January 21, 2013, 01:59:54 PM »
maybe a 1701 barrel ???

Not at a length of 12".

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

Offline 1377x

  • Moderator
  • Crosmaniac
  • ******
  • Posts: 14945
  • short list: wake up survive go to bed
Re: 10.1" Lothar Walther Match Barrel
« Reply #16 on: January 21, 2013, 06:43:44 PM »
Definitely not made for the 1377. I had to open up the lead end to get the bolt in the right spot. Amazing what you can do with a dremel.
sounds like it wasnt made for any crosman 13xx or 2xxx
small leade but it had a transfer port in the same place as the 13xx/2xxx
and the mystery continues
would be nice to know if it is a barrel commonly made,readily available and all it takes is a little work to make use of it in a 13xx or 2xxx
closed mouths dont get fed

Offline williesurvive

  • Marksman
  • ***
  • Posts: 76
Re: 10.1" Lothar Walther Match Barrel
« Reply #17 on: January 22, 2013, 04:29:26 AM »
The 1720T has the 12in. LW match grade, choked barrel.
bug a salt 2.0
1720T p-rod transfer port gaska shroud extension 21 ci bottle fed
.25 m-rod gaska shroud extension challenger stock

Offline AZAG

  • Crosmaniac
  • *****
  • Posts: 877
Re: 10.1" Lothar Walther Match Barrel
« Reply #18 on: January 22, 2013, 05:29:25 AM »
Just put a 12"lothar barrel on my 1377. Not sure what it was supposed to fit but I had to massage the lead end to get the bolt to fit right. Got to say though it is way better than my abilities.

Where did you get the barrel?

Offline 1377x

  • Moderator
  • Crosmaniac
  • ******
  • Posts: 14945
  • short list: wake up survive go to bed
Re: 10.1" Lothar Walther Match Barrel
« Reply #19 on: January 22, 2013, 08:25:57 AM »
The 1720T has the 12in. LW match grade, choked barrel.
that could explain the transfer port and narrow leade
does anyone know if the 1720t uses the o-ring in the barrel to seal the bolt? like a marauder does ???
closed mouths dont get fed

Offline bgmcgee

  • Crosmaniac
  • *****
  • Posts: 3998
Re: 10.1" Lothar Walther Match Barrel
« Reply #20 on: January 22, 2013, 01:07:36 PM »
I would be willing to bet it's a 1720 barrel. Not sure how the guy is getting them but he does live in new york. Maybe he has a crosman connection as he said if I need crosman parts to let him know.
"I've lost what's left of my right mind"

Offline 1377x

  • Moderator
  • Crosmaniac
  • ******
  • Posts: 14945
  • short list: wake up survive go to bed
Re: 10.1" Lothar Walther Match Barrel
« Reply #21 on: January 22, 2013, 01:12:28 PM »
as long as you have a part number crosman will sell you the part
i was getting 1701p trigger groups before the evp came out
closed mouths dont get fed

Offline williesurvive

  • Marksman
  • ***
  • Posts: 76
Re: 10.1" Lothar Walther Match Barrel
« Reply #22 on: January 22, 2013, 03:47:31 PM »
that could explain the transfer port and narrow leade
does anyone know if the 1720t uses the o-ring in the barrel to seal the bolt? like a marauder does ???
The o-ring is on the bolt, but I've never torn the breech apart. Been waiting for crosman to come out with the exploded view.
bug a salt 2.0
1720T p-rod transfer port gaska shroud extension 21 ci bottle fed
.25 m-rod gaska shroud extension challenger stock

Offline 1377x

  • Moderator
  • Crosmaniac
  • ******
  • Posts: 14945
  • short list: wake up survive go to bed
Re: 10.1" Lothar Walther Match Barrel
« Reply #23 on: January 23, 2013, 05:17:08 PM »
The o-ring is on the bolt, but I've never torn the breech apart. Been waiting for crosman to come out with the exploded view.
hmmm!
on the marauder/pistol its in the barrel probably because of the magazine something the 1701 and 1720 dont have
closed mouths dont get fed

Offline quickster47 †

  • Crosmaniac
  • *****
  • Posts: 11633
  • PASSED JULY 14, 2016
    • Much Ado About Nothing
Re: 10.1" Lothar Walther Match Barrel
« Reply #24 on: January 23, 2013, 06:24:27 PM »
Not quite sure about what the OP has bit I would sure like to hear how he acquired it and what exactly it is he has, other than it's a 12" LW barrel.

The 2300s LW barrel from Crosman is $54.25 and in stock.

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

Offline Fronzdan

  • Crosmaniac
  • *****
  • Posts: 952
Re: 10.1" Lothar Walther Match Barrel
« Reply #25 on: January 23, 2013, 08:26:02 PM »
I'm pretty sure he got it from Josh Perrin. I also bought an LW from him.  Mine he specifically said was from a 1720.  It is 12" and is an LW.  The lead-in is different than the 22xx and 13xx design.  Close, but not the same.  The transfer port area is slightly different too.  It's flatter.  There are flat spots on the "top" of the barrel which are likely for mounting in the 1720 breech and probably for the shroud mount.  There is no o-ring in the lead-in.  I want to compare it to the LW in my 1701.  I suspect they will be interchangeable.