- Welcome to Crosman Air Pistol Owners Forum.
Crosman Air Pistol Owners Forum
Recent posts
#91
Crosman air pistol - General discussion / Re: Availability of Don Cothra...
Last post by Drdan - February 12, 2024, 04:54:38 AMQuote from: CraigH on February 11, 2024, 10:15:37 PMThey are not the same.
More in a few minutes .......
.
.
.
Ok, since you used the words, "2300" and "2400", and did not use, 2300S and 2300T, I believe you are talking about the 2300K and 2400K Custom Shop guns.
Hi CraigH, and thank you for your input. Will the 2400 breech be a "drop in" piece for my 2300S? I'm keeping my fingers crossed... Thanks again.
Custom Shop 2400K has the long steel breech like the AS2250 and 2300S, part number AS2250-025. And has the rearward located 4-48 machine screw.
Custom Shop 2300K has the short steel breech like the 2300T, part number 2300-047. And has the rearward located 4-48 machine screw.
Neither of these are the breeches in the Steel Breeches Kits.
EDIT:
There was another steel breech - may not be available now. The Discovery rifle had a breech like the AS2250 breech, but without the rear sight dovetail - part number 1761-019.
The Maximus rifles use the AS2250 breech.
#92
Crosman air pistol - General discussion / Re: Availability of Don Cothra...
Last post by Drdan - February 12, 2024, 04:46:08 AMQuote from: marflow on February 11, 2024, 11:27:20 PM2300 = .177 2400 = .22
my picture file sizes are to large to post
This is a free online tool that can help. Alternatively you can reduce the size with PAINT, which is very user friendly...
Compression Tool
#93
Crosman air pistol - General discussion / Re: Availability of Don Cothra...
Last post by marflow - February 11, 2024, 11:27:20 PM2300 = .177 2400 = .22
my picture file sizes are to large to post
my picture file sizes are to large to post
#94
Crosman air pistol - General discussion / Re: Availability of Don Cothra...
Last post by CraigH - February 11, 2024, 10:15:37 PMThey are not the same.
More in a few minutes .......
.
.
.
Ok, since you used the words, "2300" and "2400", and did not use, 2300S and 2300T, I believe you are talking about the 2300K and 2400K Custom Shop guns.
Custom Shop 2400K has the long steel breech like the AS2250 and 2300S, part number AS2250-025. And has the rearward located 4-48 machine screw.
Custom Shop 2300K has the short steel breech like the 2300T, part number 2300-047. And has the rearward located 4-48 machine screw.
Neither of these are the breeches in the Steel Breeches Kits.
EDIT:
There was another steel breech - may not be available now. The Discovery rifle had a breech like the AS2250 breech, but without the rear sight dovetail - part number 1761-019.
The Maximus rifles use the AS2250 breech.
More in a few minutes .......
.
.
.
Ok, since you used the words, "2300" and "2400", and did not use, 2300S and 2300T, I believe you are talking about the 2300K and 2400K Custom Shop guns.
Custom Shop 2400K has the long steel breech like the AS2250 and 2300S, part number AS2250-025. And has the rearward located 4-48 machine screw.
Custom Shop 2300K has the short steel breech like the 2300T, part number 2300-047. And has the rearward located 4-48 machine screw.
Neither of these are the breeches in the Steel Breeches Kits.
EDIT:
There was another steel breech - may not be available now. The Discovery rifle had a breech like the AS2250 breech, but without the rear sight dovetail - part number 1761-019.
The Maximus rifles use the AS2250 breech.
#95
Crosman air pistol - General discussion / Re: Availability of Don Cothra...
Last post by Drdan - February 11, 2024, 03:14:14 PMBeautiful pistol KevinP.
I just received an e-mail today from Don Cothran... He asked me if the 2400 breech and the 2300 breech are the same. I'm assuming they are; if someone has a definitive answer, please post it here.
Thank you.
I just received an e-mail today from Don Cothran... He asked me if the 2400 breech and the 2300 breech are the same. I'm assuming they are; if someone has a definitive answer, please post it here.
Thank you.
#96
Crosman air pistol - General discussion / Re: Availability of Don Cothra...
Last post by KevinP - February 11, 2024, 02:05:26 PMThis is my Don Cothran 2240
breech, tube with end cap, trigger, bolt handle, safety, screws. etc. His parts are impeccable.
breech, tube with end cap, trigger, bolt handle, safety, screws. etc. His parts are impeccable.
#97
Crosman air pistol - General discussion / Re: Availability of Don Cothra...
Last post by Drdan - February 11, 2024, 09:14:33 AMThanks marflow.
Don Cothran's work is about the best I've ever seen, and if he's still making stainless steel upgrades, I'd like to get a stainless CO2 tube and a stainless breech. Two weeks ago I ordered a stainless barrel band, and had it delivered to a relative in the U.S.A.
When writing a reply go down to where it says "click or drag files here to attach them." We'd love to see some photos of your pistol. Look at the image I'm attaching... I circled in red where you need to click. TBH I was a bit perplexed with the forum format refresh; looking it over a couple of times, the solution was hiding in plain sight. 
Don Cothran's work is about the best I've ever seen, and if he's still making stainless steel upgrades, I'd like to get a stainless CO2 tube and a stainless breech. Two weeks ago I ordered a stainless barrel band, and had it delivered to a relative in the U.S.A.
When writing a reply go down to where it says "click or drag files here to attach them." We'd love to see some photos of your pistol.
Look at the image I'm attaching... I circled in red where you need to click. TBH I was a bit perplexed with the forum format refresh; looking it over a couple of times, the solution was hiding in plain sight. #98
Crosman air pistol - General discussion / Re: Availability of Don Cothra...
Last post by marflow - February 11, 2024, 07:41:18 AMjust got 3 roller triggers from him last month
i am not sure Don ships out of the country you would pay with Pay Pal
the other thing is his site was down for a long time and i think he was Sick or something else
the site is still incomplete to what it was before and as you have seen his products are as nice as anyone has ever made i have made a pistol out of his parts and many others that are not made any more
i would show it but unable to figure out how
i am not sure Don ships out of the country you would pay with Pay Pal
the other thing is his site was down for a long time and i think he was Sick or something else
the site is still incomplete to what it was before and as you have seen his products are as nice as anyone has ever made i have made a pistol out of his parts and many others that are not made any more
i would show it but unable to figure out how
#99
Crosman air pistol - General discussion / Availability of Don Cothran SS...
Last post by Drdan - February 11, 2024, 06:13:42 AMOn Don Cothran's website stainless steel CO2 tubes are available, and a Google search found a now defunct link where stainless steel breeches and other nice upgrades were offered. Here's the link:
Cothran's Stainless Steel Parts
On Don's website there is a parts request option that I filled out a couple of weeks ago, but didn't receive a response... Is Don still making these breeches upon request and if so, do any forum members have one installed on their 22XX pistols?
This is a very nice upgrade, and as per the link they were available with either a right or left bold handle position, and either a front or rear screw. Any more information and/or reviews of the Don's ss breech or CO2 tube would be appreciated.
Cothran's Stainless Steel Parts
On Don's website there is a parts request option that I filled out a couple of weeks ago, but didn't receive a response... Is Don still making these breeches upon request and if so, do any forum members have one installed on their 22XX pistols?
This is a very nice upgrade, and as per the link they were available with either a right or left bold handle position, and either a front or rear screw. Any more information and/or reviews of the Don's ss breech or CO2 tube would be appreciated.
#100
Crosman air pistol - General discussion / Re: UPDATE: Billet aluminum g...
Last post by Drdan - February 09, 2024, 10:02:22 PMQuote from: CraigH on February 09, 2024, 01:35:50 PMI have been fortunate, or more likely lucky, to tune a few base Crosman triggers to quite excellent 1-pound triggers.
I asked Teun Meen at Metura Sheissport (Metura Shooting Sports) to tune my single stage trigger to 400 grams, which is about 9/10 of a pound.