Ive ordered a crosman 2300kt and have been looking into red dot scopes and came across this and was wondering if it would work on my pistol? http://www.thegunsource.com/item/344416___Spotting_Scopes_NCS_1X40_RED_DOT_W_LASER.aspx?w=dV/7U3gO%2bfs%3d (http://www.thegunsource.com/item/344416___Spotting_Scopes_NCS_1X40_RED_DOT_W_LASER.aspx?w=dV/7U3gO%2bfs%3d)
any input would be appreciated
thats for a weaver style rail. you would need an adapter or get a red dot that attaches to dovetail.
this sight has both weaver and dovetail http://www.midwayusa.com/viewproduct/?productnumber=554049&cm_mmc=Froogle-_-Optics%20-%20Red%20Dot,%20Holo%20%26%20Laser%20Sights-_-PriceCompListing-_-554049 (http://www.midwayusa.com/viewproduct/?productnumber=554049&cm_mmc=Froogle-_-Optics%20-%20Red%20Dot,%20Holo%20%26%20Laser%20Sights-_-PriceCompListing-_-554049)
so if i want this scope it will work i just need an adapter to mount it? are there adapters that allow the use of iron sights with out removing the scope?
this one is a little long but it is hollow to allow sight alignment through it.
http://www.amazon.com/Barska-Dovetail-Weaver-Converter-Rifle/dp/B003L4BH36/ref=sr_1_5?ie=UTF8&qid=1297657374&sr=8-5 (http://www.amazon.com/Barska-Dovetail-Weaver-Converter-Rifle/dp/B003L4BH36/ref=sr_1_5?ie=UTF8&qid=1297657374&sr=8-5)
these also appear to have sight through them http://www.pyramydair.com/s/a/BKL_2_Pc_3_8_or_11mm_Dovetail_to_Weaver_Adapter_1_Long_Matte_Black/2922 (http://www.pyramydair.com/s/a/BKL_2_Pc_3_8_or_11mm_Dovetail_to_Weaver_Adapter_1_Long_Matte_Black/2922)
those BKL adapters are great! i have a one peice on on my 1377c bullpup it works great! they are made of a solid peice of steel and there are screws on them to "stretch the bottom of the base just a litle bit to slide it over the rail, and then the same screws will "squeez" the mount back together to clamp on to the rail
so are those sights ones i could use both the scope and the iron sights simultaneously
What non-optic sight are you using, is it the factory sight or some after market sight? That will make a difference as to whether or not you can use the sight mounts listed.
Carl
was just going to use factory iron sights nothing special
Then you should be able to use the BKL scope mounts. They sit a little higher but then you can see through the bottom of the mount and use your iron sights.
Carl
Your on the right track with the 3 MOA part.
If you shoot at targets farther than say 25 yds with a 5 MOA dot. The dot will be so big that it will practically cover up the 10 ring.
3 MOA is a good choice for target work.
Thanks
Ray
well gotta wait on scope to come off back order but think thats the one im gonna get. thanks for all the input i'll post pics when i get gun and when i get scope. thanks again