Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: Stonykill on April 01, 2014, 11:11:47 PM

Title: 13xx sight mods with the plastic breech
Post by: Stonykill on April 01, 2014, 11:11:47 PM
 ok, here is what I did to the stock rear sight. I shaved a lot off of the top rear portion. Having the metal v notch even or lower than the plastic caused double images.

  I also made the adjusting slot in the blade longer to get it low enough. Nail polish shown here and on a dot on the front sight.

  (http://i169.photobucket.com/albums/u215/stonykill/DSCF3431-001_zpsbb199215.jpg)

     I also sanded the base of the rear sight to get it low enough. Didn't measure how much but I did it on a random orbit sander and it was enough removed that in order to get the rear sight to sit level I needed to shave the top of the rearmost round portion of the plastic breech. Sorry for the bad pic.

   Probably took an 1/8th of an inch off of it.


  (http://i169.photobucket.com/albums/u215/stonykill/DSCF3434-001_zpsd4e0664b.jpg)

    Now at random ranges to 20 yards I can shoot a hickory nut off of a tin can every time.

   What have you guys done?
Title: Re: 13xx sight mods with the plastic breech
Post by: Trophyhunter49 on April 02, 2014, 01:29:48 AM
 :-* :-* Great mod  :) :)
Title: Re: 13xx sight mods with the plastic breech
Post by: Xxoo0o0o0ooxX on April 04, 2014, 02:51:54 AM
Good idea  :-*