Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: Bluetoe on June 23, 2020, 03:58:19 PM

Title: Crosman 2250B
Post by: Bluetoe on June 23, 2020, 03:58:19 PM
As may have been seen in my introduction post I have previously only owned a couple of 1322 pistols (I soon got bored with all the pumping) and a P338 auto (which was easily the most fun plinking pistol I ever owned and one I should have kept).
I recently swapped an SMK B20 for a 2250B and while i am happy with the deal and love the 2250 I have realised that obtaining it was only the start. It is obvious that a steel breech is a must, if for no other reason than to fit a decent scope, beyond that it seems the only limit is the bank balance :)
First things first though, the cylinder and barrel need re-bluing so I'm currently searching through 40 odd years worth of accumulated tools for a tiny allen key to remove the ridiculously small screw in the loading tray :o
Title: Re: Crosman 2250B
Post by: CraigH on June 23, 2020, 04:03:14 PM
A quality 0.050" allen key is needed.   And ensure that key is well seated into the screw before beginning the turn.
Title: Re: Crosman 2250B
Post by: Bluetoe on June 23, 2020, 07:27:57 PM
After a long search I finally found the correct allen key, talk about needle in a haystack :D it's now stripped down for blueing and once I've picked up a steel breech it will be going for some valve work and replacement seals.
Title: Re: Crosman 2250B
Post by: arkmaker † on June 23, 2020, 10:26:02 PM
The 2250 and 2400 models are my favorite shooters. The absolute three best upgrades you can do is to get the following;
Lother Walther barrel
1701p trigger frame with solid hammer
Breech that will accommodate a scope.


Do those things and you will have as accurate a shooter as any $3000. 10M rifle money can buy. The only one to blame if you miss putting them hole in hole will be yourself.
Title: Re: Crosman 2250B
Post by: Bluetoe on June 24, 2020, 01:47:59 PM
A steel breech conversion is top of my list, the gun seems to have been built down to a price rather than up to a standard. The cheapo plastic breech is obviously not suitable for dovetailing but having the scope mounted with those horrible blocks is far from ideal. While the open sights are great for plinking, maybe Crosman did not realise how popular the 22** series pistols were going to be with more serious shooters who want to fit a scope.
Title: Re: Crosman 2250B
Post by: Bluetoe on July 10, 2020, 09:30:20 PM
Cylinder and barrel now reblued, At the moment it's producing 8.5 ft lbs with 16gn AADF pellets, next step will be valve and TP modification to release a bit more power.
Title: Re: Crosman 2250B
Post by: arkmaker † on July 11, 2020, 02:37:29 AM
Looking good! Keep at it.....
Title: Re: Crosman 2250B
Post by: BillK on July 11, 2020, 05:33:52 AM
I also like the Cothran extended bolt.  A really nice feature of this bolt is the magnet on/in the  end of the bolt which holds the bolt open while loading a pellet.  Bolt handles are just cool bling.

https://cothranmachine.com/category/crosman/crosman-bolt-handles/page/3/
Title: Re: Crosman 2250B
Post by: Bluetoe on July 11, 2020, 12:28:12 PM
OMG! That Cothran site is simply airgun porn I'm going to need deep pockets :)
Title: Re: Crosman 2250B
Post by: Bluetoe on July 11, 2020, 12:31:52 PM
I can't see any shipping details on the Cothran site, do you know if they will send parts to the UK?
Title: Re: Crosman 2250B
Post by: BillK on July 11, 2020, 11:34:38 PM
Looks like he does ship overseas.  The site says to contact him for shipping.  :)
Title: Re: Crosman 2250B
Post by: Bluetoe on August 02, 2020, 05:18:52 PM
A big thank you to Ped off this very forum who yesterday rebuilt my 2250 with a modified valve and transfer port, he also carried out some work on the trigger, fitted new seals where required and replaced some of the screws with higher quality items (no more searching for the tiny allen key for me :-*) I was looking for full UK legal power (close to 12 ft lbs) but Ped informed me that could cause problems due to it still having a plastic breech and suggested around 10ft lbs would be a better option. Today I put a few shots through the Skan chrono and what can I say? The man certainly knows his stuff, ten shots using 15.89 grain Exact Jumbo pellets gave figures of between 534 and 539 fps giving an average ME of 10.3 ft lbs! (up from 8.5) The trigger was also vastly improved with a much more predictable release. Thanks again Ped, top bloke.
Title: Re: Crosman 2250B
Post by: ped on August 04, 2020, 05:24:56 PM
no probs Dee pleasure to see you and your good lady