seen this on the Canadian forum how many air guns do you Lady and gentleman own. Seen 4 guys so far there with over 100 airguns. Me i`m at 11 soon the be 12
Jim
I'm at a lucky 13. :-*
9 shooting right now, 2 under construction, and 1 still in the package ;D
Currently down to 8. Bought/built and sold off @25 over the past two years.
currently 11 --- 8 are shootable , 2 in pieces and one away being converted
3 shooters, 1 possible, and 1completed but untested project.
modded 1377
modded 2240
soon to be modded 1322
1750 HPA
One 1377 that is rough I recently purchased for the wire stock has an old style 2 screw side plate frame.
5 here, but one is my wife's.
I think she's plotting taking over the 2240 now too. :(
I've been doing some selling and buying lately...sold off a bunch of no longer wanted guns and purchased some new ones
if I haven't missed any the count stands at 40
Daisy Model 25 (2)
Crosman 1377 (2)
Daisy CO2 200
Sheridan Blue Streak (1968 model)
Colt Defender
Crosman 357-6 (2)
Benjamin 347
Crosman Mark II
Crosman AIR 17
Crosman 760 (older all wood)
Daisy 250
Crosman 160
RWS Model 45
Crosman 700
Daisy 1894
Daisy 840
Daisy 1200
Daisy 717
Crosman 2300KT
Crosman 1720T
Crosman1701P
Crosman MTR77NP
Crosman Vigilante
Gamo PT-85
Walther CP88
Crosman 2289
Crosman 1600
Crosman M4-177
Daisy 777
Daisy CO2 300
Daisy 880 (2)
Daisy 850
Crosman 500
Daisy 450
Crosman 1400
Daisy 99
40? And no Beeman P-17? :)
Id have to go with 16-17. Got 1 In The Shoot.For.Another.Build.
here's some oldies that I sold off in the last couple of months...all were in excellent condition
Crosman 622 PellClip
Daisy CO2 92
Marksman 4000
Crosman Trapmaster 1100
Crosman 2200 Magnum (2 variants)
Crosman M1 Carbine (with original clip and wood stock)
Crosman 1861 Shiloh
Sears Ted Williams 799 (Daisy)
RWS Model 10
RWS Model 5GS
Daisy 790
.
We have six. I have five in my sig, but there is only three I personally shoot. My Crosman 2240 pistol, the Crosman Quest 1000 rifle, and the RWS rifle (which is my husband's but I keep stealing it from him and shooting it :D ). Most of the guns are his except for the 2240 and the Quest. They were gifts.
Quote from: WyoMan on September 04, 2013, 03:12:15 AM
9 shooting right now, 2 under construction, and 1 still in the package ;D
Blasphemy ..............
Quote from: Tater on September 04, 2013, 04:44:00 AM
40? And no Beeman P-17? :)
Tell him Tater. We need another member of the P17 club! Tater, get your target shot for the comp. only 8 more days to go. ???
Quote from: mudduck48 on September 04, 2013, 05:16:22 AM
Tell him Tater. We need another member of the P17 club! Tater, get your target shot for the comp. only 8 more days to go. ???
I'm heading to Cabela's and Walmart tomorrow...I know Cabela's sells them so if they have one in stock I just might pick one up.
Quote from: KevinP on September 04, 2013, 05:14:09 AM
Blasphemy ..............
;D ;D Only way I can keep my grubby modding paws off of it :D
Quote from: mudduck48 on September 04, 2013, 05:16:22 AM
Tell him Tater. We need another member of the P17 club! Tater, get your target shot for the comp. only 8 more days to go. ???
I know, I know. I went fishing over the weekend and had to do work around the house the rest of the weekend. Didn't even get everything done and didn't even have time to shoot once.
Benjamin Marauder
Daisy 990
Daisy 880
Dasiy lever action (the shortest one they made about 20 years ago...
Crosman 1377 X2 (one rear cocker and one one newer one)
Crosman 1322
Crosman 2289
Crosman 2240
Crosman 1077
Crosman 357
Crosman P11
Crosman Powermaster 66
Crosman Recruit (will be complete in the next couple days as soon as the barrel comes in)
Beeman RS2 X2
Marksman 2004
B3 X2
Chinese break barrel pistol
That makes 20, and that's not including the 3 or so Marksman Repeaters I have floating around... That count is just form memory though so I could be missing one :)
14 or 15 AG's right now.
good question :P
I seen on the Ca forum that one guy has over 400 airguns and he even sold a bunch off thats insane
Jim
Quote from: brz-ryder on September 04, 2013, 10:23:49 PM
I seen on the Ca forum that one guy has over 400 airguns and he even sold a bunch off thats insane
Jim
Sounds like Crosshairs ;D. Naw don't sell any . ;D ;D
I have 16 or 17 and one still to be shipped from Arizona.
Glen
Only got three, but since I can only shoot 2 at a time that leaves me 1 as a spare.
Just did an inventory and this is what I came up with;
Pistols
1740 Pistol .177
2240 Stubby Pistol .22
2240 BF Pistol .22
1322 Pistol .22
357 Pistols (3x)
1861 Shiloh
Rifles
AF Edge Target Rifle .177
Benjamin Titan NP GP Rifle .22
Benjamin Trail NP Rifle .22
Model 114 Rifle .22
Model 140 Rifle .22
1077 (2x) Rifles .177
2250 Outdoorsman Carbine .177
11 shooters, 2 under construction and 1 on the drawing board:
Pistols
Dan Wesson 8"
357-6 (1st variant - brown grips) - needs seal kit
Beeman P-17
MK I (x2)
Custom MK I HPA (regulated)
1750 PCP
Rifles
Benji Trail NP Hardwoods
2260 HPA (regulated)
AR2078 HPA (regulated)
2289 DBO (well, it's on it's way to me at least! ;))
Under Construction
Custom Disco/22xx hybrid PCP (.22 cal)
.25 cal QB78
On the "drawing board"
.30 cal Hatsan AT44 Long
Hijack time .... I know this is a Crosman site, and I love my Crosmans. But I want another RWS rifle so I would leave my husband's rifle alone :D Which one should I get?
I have this many ;)
Pistols
MP-654k Makarov 1999 Gen 1
MP-564k Makarov 2011 Gen 4
Smith & Wesson 686
Colt 1911 A1
Webley Tempest
Crosman 2300T
Crosman 1322
Beeman P17
Beretta M92
Milbro G10
Rifles
Diana Model 15
Crosman AIR17
AA TX200
Walther LGV Comp Ultra
Quote from: punchpressqueen75 on September 05, 2013, 02:57:37 PM
Hijack time .... I know this is a Crosman site, and I love my Crosmans. But I want another RWS rifle so I would leave my husband's rifle alone :D Which one should I get?
If the RWS does it for you, then go for it! It's all about having fun.
I'd never counted before today: airguns= 53 rifles and 42 pistols
Really didn't think I had that many ???
Quote from: DJammer on September 06, 2013, 01:23:56 AM
I'd never counted before today: airguns= 53 rifles and 42 pistols
Really didn't think I had that many ???
You are the MAN!!!!!
Quote from: DJammer on September 06, 2013, 01:23:56 AM
I'd never counted before today: airguns= 53 rifles and 42 pistols
Really didn't think I had that many ???
SWEET MOTHER OF PEARL!!!!!
- Al Bundy
If a deal I just found goes through, might be the owner of about 60 more airguns... many of which would be for sale :)
I know I am a sick man, but I sure feel better knowing I am not the sickest! ;D
You guys are over the edge. I'm book marking this page for the next time my wife gives me crap about how many I have :-*
Quote from: arkmaker on September 06, 2013, 10:47:11 AM
I know I am a sick man, but I sure feel better knowing I am not the sickest! ;D
You guys are over the edge. I'm book marking this page for the next time my wife gives me crap about how many I have :-*
[/quote
;D ;D ;D ;D ;D ;D ;D
good idea for you Married guys still had to laugh at that one
Jim
What is really scary is when you start to add up the cost associated with each gun! Wow, I have over 3k tied up in that short list of mine. Not that I could ever recover it all :(
Rich
I know what you mean Rich my first 2240 with the custom brass CO2 tube i made for it and every thing else i have over $400 to $500 in it at least for a $54 gun and my 1377 i have more way in goodies than it costs with no power upgrades i know i have over $3000 tied up but what the heck i enjoy this hobby
JIm
Forgot to add the cost of buying the lathe and mill
Jim
A couple.
3 BB pistols, 6 pellet pistols, and 12 pellet rifles make up my arsenal. RC
3 for me
70+fpe .25 disco
50+fpe stainless steel 2260
9fpe phase 2 1377
oops forgot one mystery beratte sg-4 bb shotgun
i guess i have 4
Quote from: 1377x on September 06, 2013, 05:16:16 PM
3 for me
70+fpe .25 disco
50+fpe stainless steel 2260
9fpe phase 2 1377
oops forgot one mystery beratte sg-4 bb shotgun
i guess i have 4
Wow! A 2260. What a pain to make. Ya have to post a pic. Crosman didn't allow phones with cameras on them, so I can't show a pic of me trying to punch them things :o
Why RWS? What are you going to do with the rifle primarily?
If just targets and plinking, there are many other choices IMO, and most are less $ and smoother shooters than the (arguably over-priced) RWS guns.
Quote from: 1377x on September 06, 2013, 05:16:16 PM
3 for me
70+fpe .25 disco
50+fpe stainless steel 2260
9fpe phase 2 1377
oops forgot one mystery beratte sg-4 bb shotgun
i guess i have 4
Me I have 5 only..
1 1377
2 2400KTs both .177
1 CZ S200 .177 Hunter Series
1 Gamo Whisper .177 aka junk gun lol!
Quote from: arkmaker on September 06, 2013, 11:06:48 AM
What is really scary is when you start to add up the cost associated with each gun! Wow, I have over 3k tied up in that short list of mine. Not that I could ever recover it all :(
Rich
I'm guessing the cost per hour isn't very high...thats what I have to do when I start adding :)
Quote from: WyoMan on September 06, 2013, 06:29:54 PM
I'm guessing the cost per hour isn't very high...thats what I have to do when I start adding :)
I never count labor cost as this is a hobby and suppose to be fun and stress relieving!
RIGHT??? ;D
Speaking of stress release........3 more hours til quitting time and then I am off for two weeks~~ :-*
Stress relieving it is :-* and fun, sometimes challenging but thats part of the fun too...
2 weeks off, wow, lucky on you ;D
Quote from: punchpressqueen75 on September 06, 2013, 05:25:07 PM
Wow! A 2260. What a pain to make. Ya have to post a pic. Crosman didn't allow phones with cameras on them, so I can't show a pic of me trying to punch them things :o
here it is
the tube was made by dc, the internals by wmva & crosman, 1701 trigger,1399 stock, crosman steel breech & barrel, bolt by mellonair
this gun has much potential i fill it to 3000psi and can go as high as 3400psi without doing a couple more mods
i am going to switch out the breech. right now i have a rjm hi-rise breech and a bfd hi-rise breech that are the candidates. i am thinking because of the power it has the bfd would be the the best choice because it uses a short 4-48 breech screw. i was told by someone who makes custom parts that the long 4-48 breech screw leads to the breech being weakly secured to the tube causing leak and accuracy issues. i have spoken to a few of the custom parts makers on the phone for an hour or more. learned some good info from them. actually 2 of the parts makers told me of the long 4-48 breech screw being the weak link why dont they just use a 6-32 screw?.
How many?
This is in my sig-pic... More Than I Need and Less Than I Want
:D ;D
Quote from: 1377x on September 06, 2013, 07:00:28 PM
here it is
the tube was made by dc, the internals by wmva & crosman, 1701 trigger,1399 stock, crosman steel breech & barrel, bolt by mellonair
this gun has much potential i fill it to 3000psi and can go as high as 3400psi without doing a couple more mods
i am going to switch out the breech. right now i have a rjm hi-rise breech and a bfd hi-rise breech that are the candidates. i am thinking because of the power it has the bfd would be the the best choice because it uses a short 4-48 breech screw. i was told by someone who makes custom parts that the long 4-48 breech screw leads to the breech being weakly secured to the tube causing leak and accuracy issues. i have spoken to a few of the custom parts makers on the phone for an hour or more. learned some good info from them. actually 2 of the parts makers told me of the long 4-48 breech screw being the weak link why dont they just use a 6-32 screw?.
Beautiful piece. Great job on it :-*
Quote from: 1377x on September 06, 2013, 07:00:28 PM
why dont they just use a 6-32 screw?.
Nice shooter Ed!
More/finer threads (higher tpi) is needed because of the thin tube wall thickness. There just isn't anything for the screw to grab onto with a coarse thread screw like the 6-32. It might look bigger, but this is one case where bigger is not better. Also, I don't believe that a shorter 4-48 screw would make any difference from the long 4-48 screw. Either way, it will only grab (thread) the thickness of the tube. If it strips, it's coming out under pressure. Which is why it is always a good thing to anchor the valve and use a barrel band up close to the breech. A thought I have had was that to bad the valve did not extend further rearward so that a larger screw such as the 6-32 could anchor the breech through the tube and into the valve itself. Then you would end up with real security of the barrel and breech.
Of course these are my opinions, but based on 40 years of shop theory and practice (with a few failures along the way). ;)
I think I have 11 or 12 or something .... :( ..... ;) :-*
Quote from: crossliner on September 06, 2013, 06:06:04 PM
Me I have 5 only..
1 1377
2 2400KTs both .177
1 CZ S200 .177 Hunter Series
1 Gamo Whisper .177 aka junk gun lol!
How are you liking that CZ200? I have only heard good things about them.
Rich
updated count since posting 40 on Sept 3...now at 46 with one coming (Sig Sauer P226 X-Five Open Combo).
22 pistols
http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection)
24 rifles
http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Rifle%20Collection (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Rifle%20Collection)
and currently looking for a Baikal MP 655K and MP 657k.
I will need to count them not really sure but i have a few.
Mike
Quote from: Crosshairs on October 05, 2013, 03:02:34 AM
I will need to count them not really sure but i have a few.
Mike
;D ;D ;D. A few that's a good one Mike.
Not enough.
Quote from: arkmaker on September 07, 2013, 12:43:39 AM
Nice shooter Ed!
More/finer threads (higher tpi) is needed because of the thin tube wall thickness. There just isn't anything for the screw to grab onto with a coarse thread screw like the 6-32. It might look bigger, but this is one case where bigger is not better. Also, I don't believe that a shorter 4-48 screw would make any difference from the long 4-48 screw. Either way, it will only grab (thread) the thickness of the tube. If it strips, it's coming out under pressure. Which is why it is always a good thing to anchor the valve and use a barrel band up close to the breech. A thought I have had was that to bad the valve did not extend further rearward so that a larger screw such as the 6-32 could anchor the breech through the tube and into the valve itself. Then you would end up with real security of the barrel and breech.
Of course these are my opinions, but based on 40 years of shop theory and practice (with a few failures along the way). ;)
a lot of people have changed the 4-48 to 6-32. iirc, it is recommended when using high pressures like 2600psi on up
my 70fpe disco uses (2)6-32 screws to help hold the breech down. i cant remember which vendor it was that had the breech blow the single 4-48 right out of the gun. even though that happened the slug was still sent screaming the tube at a really good speed but once they upgraded to the 6-32 breech screw the breech never popped up again ???
i dont know the science of it but when someone who makes and shoots high powered airgun routinely recommends it i usually go with the advice of the experienced
when i put the breech on using the (2)6-32 screws i could feel them really biting down
In this case, I still feel that more tpi is better, along with a band up near the front of the breech. Like I said, just my opinion and everyone has more than enough of those to go around ;D
Regardless, that spot in either screw size is a weak spot because of the thin wall of the tube. Not so much a concern to me though, cause if you think about it, the only time it sees pressure is when the valve opens and then the barrel becomes the easy outlet for the air/gas behind the pellet. Sound right? Now pinning the valve is definitely a must do, because it would really suck to feel a hammer and valve hit me in the shoulder with 2k of pressure behind it!
because it would really suck to feel a hammer and valve hit me in the shoulder with 2k of pressure behind it!
indeed .....
46 at the moment:
8 .177 pistols
5 .22 pistols
16 .177 rifles
17 .22 rifles
Quote from: KevinP on October 05, 2013, 04:20:31 PM
because it would really suck to feel a hammer and valve hit me in the shoulder with 2k of pressure behind it!
indeed .....
been there
forgot to put 2 of the 3 retaining screws in before testing for leaks. luckily there was no hammer and end cap. at 1800psi the valve shot out the back of the gun hitting me in the forearm before going 30 more feet lodging itself in a box. i had a deep hard bruise the size of at least a soft ball it stayed a several weeks before starting to clear up
arkmaker the 4-48 screw is the waekest link but what can be done?
i laughed when the vendor told me about blowing the breech off the gun. iirc he was using a valve he made that released all 3000psi in one shot
my how your collection has grown brutuz and this is after you sold some off
Quote from: arkmaker on October 05, 2013, 04:13:37 PM
In this case, I still feel that more tpi is better, along with a band up near the front of the breech. Like I said, just my opinion and everyone has more than enough of those to go around ;D
Regardless, that spot in either screw size is a weak spot because of the thin wall of the tube. Not so much a concern to me though, cause if you think about it, the only time it sees pressure is when the valve opens and then the barrel becomes the easy outlet for the air/gas behind the pellet. Sound right? Now pinning the valve is definitely a must do, because it would really suck to feel a hammer and valve hit me in the shoulder with 2k of pressure behind it!
You both are correct! That happens so rarely these days. More threads IS better in the thin-walled tubes, BUT higher shear strength of a larger diameter screw is very important since that lateral pressure on the shaft of the screw is what would fail if one were to "adios" on you.
I learned this the hard way about 7 years ago when a new rotary engine porting and Barry Grant Race Demon carb literally slung the passenger side drive wheel off the rear. It happened immediately since it is a limited slip differential and the one was gone before the other engaged or it would have broke both sides! The threads of the lug studs did not fail. The torque sheared all four studs off immediately and launched the tire. I had to comb the woods to find the brake hub. Very lucky this happened during tuning as I would hate for that to happen during a "spirited drive" on some back road twisties. Solution: 160,000 psi rated tensile / shear strength dirt track racing style lug studs of the same thread / diameter / length, but far far beyond the possibility of ever doing that again. Same principle.
Well I had 30 but down to 27 now. Sold 3 at a yard sale this weekend for my Granddautghters Med. bills. So they went for a good cause. Want take long to replace them with some more and more and more LOL
Nowhere near as many as I would like to have! :( :(
Just a measly 3 at this point:
1377 mod
2400KT .177 in-process for the wife (shootable at least)
2240 to 2260 (.177) "mixed breed"...full-out custom bulk feed hunter (still waiting for all of the parts)
Now I'll have a complete spare frame and bare 2240 tube to play with, mentioned a riser breeched full-length shroud pistol to the wife today...I got the "one raised eyebrow" look so I guess that project will be on hold. :( :(
You guys make me look like a rookie. I have just 6 guns .... note to self ..... buy more guns ;)
Quote from: airriflenut on October 08, 2013, 03:42:06 AM
Nowhere near as many as I would like to have! :( :(
Just a measly 3 at this point:
1377 mod
2400KT .177 in-process for the wife (shootable at least)
2240 to 2260 (.177) "mixed breed"...full-out custom bulk feed hunter (still waiting for all of the parts)
Now I'll have a complete spare frame and bare 2240 tube to play with, mentioned a riser breeched full-length shroud pistol to the wife today...I got the "one raised eyebrow" look so I guess that project will be on hold. :( :(
Quote from: punchpressqueen75 on October 08, 2013, 03:50:10 PM
You guys make me look like a rookie. I have just 6 guns .... note to self ..... buy more guns ;)
Think positive guys Laurie 6 is more then 5 and 3 is more then 2 if you get what i mean.
Mike
Enough to do the job if it becomes necessary. :D
Carl
well I have 18 so far....Not-bad for just getting into airguns 6 weeks ago....Pure-FUN!!! At 65 yet-LOL
I have 4.
Quote from: daxvlx47 on October 12, 2013, 04:49:13 AM
well I have 18 so far....Not-bad for just getting into airguns 6 weeks ago....Pure-FUN!!! At 65 yet-LOL
18 in just six weeks!!!! :o :o
I'm jealous!! As the saying goes, "If I had the money I would.....". I would have a house built with a basement with a real vault in the corner, when the heavy door was opened the eyes would be overwhelmed display of shooters glory...powder AND air!!!
I'm pleased that you have jumped into airgunning at the young age of 65! :-* :-*
My last post in here with a number was 20 airguns, then I got a lot of 62 from Craigslist but 4 sold so that leaves 78 airguns in my house :), I should really thin that out a little more, they're all over the place... :)
Crosman Backpacker 2289 - .22
Crosman 1322 - .22
Crosman Pumpmaster Classic - .177
Crosman 1377 American Classic (refurb) - .177
Bemjamin Marauder (refurb) - .177
Beeman R9 - .22
Diana 34 Pro Compact - .177
Gamo CFR - .177
Didn't count but I would guess at least 135.
Mike
While browsing this thread I see even guys with lots and lots of guns don't own PCP's from brands like FX, AA, Weihrauch or so. What is the reason for that?
I currently own only 5 airguns but with these 5 I can do anything one can realistically expect from airguns. So I doubt I will buy any more at this stage, but you never know.
My list
1. Crosman 2240 .22
2. Crosman 1077 .177
3. Gamo PT-85 .177
4. FX Ranchero. .177 PCP. (Longer barrel and cylinder fitted, as well as a carbine wooden stock) My favourite gun of all.
5. Webley Axor .20 PCP (24.7 FPE)
I think you will find that this site caters to the tinkerer. Being that the Crosman 22xx platform lends to a relatively easy opportunity for not to awful much money, that a lot of the folks here tend to build their own HPA shooters. There sure have been some nice ones over the years!
I also am in the process of downsizing my collection, but will never stop building them. I just like it to much. That said, this is my current list as of today;
Pistols
1740 Pistol .177
2240 Stubby Pistol .22
357 Pistols (3x)
1861 Shiloh
2250 HPA (being built now)
Rifles
AF Edge Target Rifle .177
Benjamin Titan NP GP Rifle .22
Benjamin Trail NP Rifle .22
Model 114 Rifle .22
Model 140 Rifle .22
1077 (2x) Rifles .177
2250 Outdoorsman Carbine .177
66 PowerMaster
That makes sense arkmaker.
I might just get a second 2240 and see how far I can take it.
added this to my collection today....
now have 23 pistols...24 rifles
(http://i14.photobucket.com/albums/a324/rws53/BB_Pellet%20Guns%202/BaikalMP655K_2_zps42910313.jpg) (http://s14.photobucket.com/user/rws53/media/BB_Pellet%20Guns%202/BaikalMP655K_2_zps42910313.jpg.html)
Quote from: rws_53 on October 12, 2013, 08:35:07 PM
added this to my collection today....
(http://i14.photobucket.com/albums/a324/rws53/BB_Pellet%20Guns%202/BaikalMP655K_2_zps42910313.jpg) (http://s14.photobucket.com/user/rws53/media/BB_Pellet%20Guns%202/BaikalMP655K_2_zps42910313.jpg.html)
Nice i like it where did you get it from.
Mike
Quote from: Crosshairs on October 12, 2013, 09:35:50 PM
Nice i like it where did you get it from.
Mike
ordered it from a pellet gun dealer in North York, Ontario on Sunday (Oct 6) afternoon and got it today...pretty good service coming out of Canada!
(http://i14.photobucket.com/albums/a324/rws53/BB_Pellet%20Guns%202/BaikalMP655KShippingLabel_zpsbef25bb6.jpg) (http://s14.photobucket.com/user/rws53/media/BB_Pellet%20Guns%202/BaikalMP655KShippingLabel_zpsbef25bb6.jpg.html)
.
With the arrival of the Vigilante Im now at 16 total
Jim
Quote from: Crosshairs on October 08, 2013, 04:07:03 PM
Think positive guys Laurie 6 is more then 5 and 3 is more then 2 if you get what i mean.
Mike
That's true ;)
Quote from: punchpressqueen75 on October 13, 2013, 02:07:58 PM
That's true ;)
It only took me 30 years to collect all of mine lol.
Mike
i have 5 now just added a 1377 2 screw grip frame to my short list
I have nine that I call my own.
One 2300KT .22 :)
One 2400KT .22 bulk fill repeater :)
One 1077W .177 scoped :) :)
One 1077 .177 tactical dress :)
One 2240 .22 polished :)
One 2240 .22 camo dressed :)
One sidelever .177 archer thingy >:(
One NT trail pistol .177 in metamorphosis right now
One 2250XE .22 scoped :)
I also have a few "mannequins" that get new stuff put on for testing, pictures then taken off and something else, etc.
1322
1377
Backpacker
760B
2240
2250
Quote from: Davio on October 16, 2013, 01:10:17 AM
I have nine that I call my own.
One 2300KT .22 :)
One 2400KT .22 bulk fill repeater :)
One 1077W .177 scoped :) :)
One 1077 .177 tactical dress :)
One 2240 .22 polished :)
One 2240 .22 camo dressed :)
One sidelever .177 archer thingy >:(
One NT trail pistol .177 in metamorphosis right now
One 2250XE .22 scoped :)
I also have a few "mannequins" that get new stuff put on for testing, pictures then taken off and something else, etc.
1322
1377
Backpacker
760B
2240
2250
why the angry smiley for the side lever archer thingy ???
Quote from: 1377x on October 16, 2013, 02:15:31 AM
why the angry smiley for the side lever archer thingy ???
I suppose I should not think so harshly about a gun (QB57) that is less than $100 with case that works. The wood work is very rough looking... like it needs to be sanded and redone... especially in the slots on the fore. Very rough. Like lacquer covered splinters in there.
It is a really cool concept to un-thread it to break it down... or even to change calibers if you have both barrel assemblies, but it is not a tight fit at max hand tight (and I have more hand strength than most) without wiggling and canting as you turn that last 1/4 turn with all might available. The stock sights are somewhat crude. But for the money... I am saving it for a rainy season when I can go through it some.
Like the industry sights, a little cleaning up, refinishing and tweaking makes a lot of difference.
If I did not see any redeeming potential I would have already off-loaded it, but it may be a good project someday.
i have been seeing the 57's a bit lately
and here i thought you was talking about the side lever qb 78 breech :-[
Quote from: Davio on October 16, 2013, 06:04:43 AM
I suppose I should not think so harshly about a gun (QB57) that is less than $100 with case that works. The wood work is very rough looking... like it needs to be sanded and redone... especially in the slots on the fore. Very rough. Like lacquer covered splinters in there.
It is a really cool concept to un-thread it to break it down... or even to change calibers if you have both barrel assemblies, but it is not a tight fit at max hand tight (and I have more hand strength than most) without wiggling and canting as you turn that last 1/4 turn with all might available. The stock sights are somewhat crude. But for the money... I am saving it for a rainy season when I can go through it some.
Like the industry sights, a little cleaning up, refinishing and tweaking makes a lot of difference.
If I did not see any redeeming potential I would have already off-loaded it, but it may be a good project someday.
Ya... that QB57 is a bit of a "kluge" looking contraption with the wood foregrip sitting as it does and the OEM wood leaves MUCH to be desired.
I had one of it's "cousins" the QB58 and it was rusty, sheet metal junk IMO and the trigger and sidelever were dangerous as hell >:(
I have quit buying cheap springers about two years ago, even if the guts can be fixed, the cosmetics are almost impossible to improve.
Quote from: WyoMan on September 04, 2013, 03:12:15 AM
9 11 shooting right now, 2 1 under construction, and 1 still in the package ;D
;D ;D
added a couple more pistols to my airgun collection...now at 25 pistols and 24 rifles
pistol slideshow
http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection)
rifle slideshow
http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Rifle%20Collection (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Rifle%20Collection)
added 3 more pistols...now at 28 pistols and 24 rifles
(http://i14.photobucket.com/albums/a324/rws53/BB_Pellet%20Guns%202/3More_zpsc3f0cc8b.jpg) (http://s14.photobucket.com/user/rws53/media/BB_Pellet%20Guns%202/3More_zpsc3f0cc8b.jpg.html)
Thanks to this forum I am currently at 3, with 2 more in route.
(http://i720.photobucket.com/albums/ww209/doogie65/AGcollectionNov2001_zps604d70fc.jpg)
Nice guys :-*
currently....I have 5.....
powermaster 66
1377
1322
Remington vantage NP .177
model 1 .22
Never enough :D ;)
Two at the moment...
Diana 34 .22 with T06 trigger 8)
Diana Panther 21 .177 :-\
And considering to buy a new Crosman pistol again :-*
Quote from: Tater on September 04, 2013, 04:44:00 AM
40? And no Beeman P-17? :)
And no RWS 34?!?!?!? :o :o :o
I have whats in my sig line. ;)
CW
Here is a few.
More
I am officially at 5 now as the P-rod I picked up on AAG along with a CCS 2400KT were delivered today! This is the email text from my wife as she had to sign for the 2400... "just signed for a package... ANOTHER AIRGUN??" ???
That doesn't sound very good for you. :D ;D ;D ;D
Quote from: vertguy on November 08, 2013, 02:33:15 AM
I am officially at 5 now as the P-rod I picked up on AAG along with a CCS 2400KT were delivered today! This is the email text from my wife as she had to sign for the 2400... "just signed for a package... ANOTHER AIRGUN??" ???
Did you send one back with the shoes pic "another pair" ;D
I don't even bother anymore .
Nice pics of your collection Mike. :-* Always so neat and displayed well.
Or this: http://www.network54.com/Forum/79537/thread/1383691585/Airgunners+Anonymous (http://www.network54.com/Forum/79537/thread/1383691585/Airgunners+Anonymous)
Quote from: bgmcgee on November 08, 2013, 03:20:04 AM
Did you send one back with the shoes pic "another pair" ;D
I don't even bother anymore .
Nice pics of your collection Mike. :-* Always so neat and displayed well.
+1 for Mike's "museum" of guns!
And for those who are whininxxxx, er, I mean... "expressing their deep concern" for their wiife's comments about too many airguns... (too much money, too many cars, too much time?) :D
The classic PA commercial.. :-*
[youtube]https://www.youtube.com/watch?v=LPoeqEd8G8Q#]https://www.youtube.com/watch?v=LPoeqEd8G8Q#[/url]
^^^ ;D ;D ;D
Awesome collection Mike :-* ...gives a new meaning for "nice groups" :D
Quote from: bgmcgee on November 08, 2013, 03:20:04 AM
Did you send one back with the shoes pic "another pair" ;D
I don't even bother anymore .
Nice pics of your collection Mike. :-* Always so neat and displayed well.
LMAO ;D
And very nice collection Mike ! Impressive.., especially the 760 pumpers :-*
Thanks guys these pics are from last year when someone dared me to post all of my guns lol it took a wile but i think i got most of them here are some more.
Mike
more
Dammmmmmmmmmmmmmmmmm ....
Quote from: vertguy on November 08, 2013, 02:33:15 AM
I am officially at 5 now as the P-rod I picked up on AAG along with a CCS 2400KT were delivered today! This is the email text from my wife as she had to sign for the 2400... "just signed for a package... ANOTHER AIRGUN??" ???
Just saw this.... ;D ;D
Your toast buddy, better bring home a nice little gift for her soon! Happy wife, happy life!
Quote from: arkmaker on November 08, 2013, 11:51:46 PM
Just saw this.... ;D ;D
Your toast buddy, better bring home a nice little gift for her soon! Happy wife, happy life!
She likes to give me grief, but in the end is ok with my new hobby. But I did take the day off today and we both went shopping for stuff to put in the basement I recently finished. The plan was to pick up a dartboard and cabinet, and look at some bars. Well, we went home with dartboard items and put a deposit on a 92 inch bar and 4 stools. Although the plan was to "mill it over", but I think it will end up being a done deal... which should make everything good. Oh, and she had yet to see the Cabela's shooting bench I picked on Wed. :-*
With the addiction off the Daisy 1140 now up to 17
Jim
Damn mike, you could buy a second house with your gun collection.
Actually, it looks like you need a second house FOR your gun collection!
added 5 more handguns to my collection in the last month...
updated handgun slideshow includes newly added guns
http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection)
Now at 33 handguns and 24 rifles.
Enough to spell Crosman
Quote from: YSYEO on December 04, 2013, 01:59:07 PM
Enough to spell Crosman
Your to much !!!!!!!! ;D ;D ;D :D :D
This many
Doing a quick count of what's in the house right now is 78 pellet or BB guns... there might be as many as 80 as 21 of them were just from memory :)
Quote from: YSYEO on December 04, 2013, 01:59:07 PM
Enough to spell Crosman (https://dl.dropboxusercontent.com/u/97301041/Misc/EyePatchSmileIcon.gif)
(https://dl.dropboxusercontent.com/u/97301041/Misc/AllSpelledOut.jpg)
I see a Crosman 1300 in the first leg of the M. Does it work?
Quote from: mudduck48 on December 05, 2013, 03:48:09 PM
I see a Crosman 1300 in the first leg of the M. Does it work?
Yes, the 1300 Medalist II works.
Actually, with the exception of the 622 in pieces at the right, and the unknown status of the 2 sealed 1377s, they all work.
Edit: The picture does not include my Daisies, Chinese break-barrels, and a couple recent Crosman additions. I just recounted, and I'm at 33, but there is a 2260 on order. (https://dl.dropboxusercontent.com/u/97301041/Misc/EyePatchSmileIcon.gif)
Well the new 2260 pushes me to 18 and thats in just over a year i better slow down a little ;) as if that would ever happen ;D ;D
Jim
One old leaky Crosman 357 until I did a Google search to find out how to fix it and found this forum. Now I have 23 and have my eye on a lot more :).
added 2 more...Smith & Wesson 78G and a 79G
now at 36 handguns and 24 rifles
slideshow of handguns
http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection)
slideshow of rifles
http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Rifle%20Collection (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Rifle%20Collection)
.
Hopefully more after Christmas.
Mike
Quote from: Crosshairs on December 22, 2013, 01:42:09 PM
Hopefully more after Christmas.
Mike
;D I do believe that's a given ....
Quote from: Bill L. on December 21, 2013, 06:44:05 AM
One old leaky Crosman 357 until I did a Google search to find out how to fix it and found this forum. Now I have 23 and have my eye on a lot more :).
:D ;D that's soooo true, my collection went from 4 rifles and 3 pistols, to 16 rifles and 10 pistols after joining this forum!
Next up, the Winchester MP4 co2 rifle.. And the factory seal is just barely broken off the 2260 from two weeks ago :D ;) :)
Well i added 3 more to my list 2 116`s and last week a AS2250XT brings my total to 21 now
Jim
As of today I have 6 keepers, 2 in transit and 8 others for sale
Down to 3... for now ;D
I have 8 Crosman's alone. Then I have 10 additional airguns, not including my airsoft collection, which is another 10 guns on top of that. I also own 3 powder burners but they don't stay with me as they are with my Dad who lives in another state since he is a powder burner guy and uses them more than I would.
since my last count in late December I have added a 1322, 2300KT, 2 Crosman 600's, Mark I and a Vigilante.
now at 66
handguns - 42
rifles - 24
Looks like I'm still a lower level collector - 5 Pistols and 4 rifles. Hopefully to be adding another of each in the near future. Both CO2 Crosman's.
Quote from: Crosshairs on November 08, 2013, 07:55:23 PM
more
Is anyone else surprised that Mike has never built a dedicated Air Rifle Rack? It'd probably run the length of his house 4X. :-*
Lmao I was talking to my buddy about that how funny if that.
From my Sig Pic
"My Airguns: More Than I Need and Less Than I Want"
Total is about 35, 24 rifles and 11 pistolas.... :-*
:) Sat down today and counted my airguns and came up with this number!
24 rifles
16 pistols
3 airsolf pistols
1 airsolf rifle
1 homemade airsolf Machine gun
45 total
:-[ :-[
Haven't counted lately, but believe at the moment between 40-45.
Wait, just got another. LOL
;) Here are a few pics og my AGs.
:) More ;D ;D
:) And more pics. ;D ;D ;D ;D
:) airsolf Machine gun ;D ;D ;D ;D ;D ;D 120 psi on it . Only 3 shot burst and then back to the air compresser ;D ;D ;D ;D
There are two more one is in the gun safe , it's a Daisy Christmas Stroy Red Ryder. It's the 2nd month that they made them in 1983 ! The other is still a box of PARTS ;) ;) for the Throw Down build !!
And I have gained more since this thread started. HELP! :P
Guess I'm a piker!! Only have six, four pistols and two rifles.
I really feel inadequate with only two. :( :( :-[
Lost count and stashed in several places ohohhhhh :-[
22 pistols, 8 rifles. RC
For some reason - (today) - I got the nerve for an exhaustive inventory:
3 - 1377
3 - 1322
2 - 1320
1325
3 - CR 600
Alecto - 177
Alecto - 22
Alecto - 20
3 - P-17
Hw-75
2250
2550
766 Ph3
Diana 350
CR 600 in parts
1750 in parts
3050 in parts
Mentally exhaustive. It's either 23 or 26...depending on how you count ;D
I was thinking about this today also. I think that I have enough. When you start out, you don't think enough is enough. But, I just realized I have more than I can shoot. That is why I can't hit anything. I do not use one or two guns enough to get the feel of the trigger and the sights. So, this is enough. :P
:o Oh No !! Duck you know that you will see another one later and you'll just have to have it !! ;D ;D ;D ;D
I don't think so Tim. I was thinking of fixing some of my paper weights instead of buying more guns. I really need to get my 38T going. I have talked about it for far to long. I think the DW715 did it for me. Great gun, but too heavy a trigger. I could have spent that money on repairing some of my collection. Don't know, but going to try to not buy anymore. :P :-*
Mr. Duck , I've said the same thing !! Today I sent an oreder to Crosman for parts for a new build and spent $270.00 !! My wife is goin to kill me !! ;D ;D ;D ;D
Latest count:
Rifles/Carbines x 9
FWB 300s
CMP 853 x 3
Daisy 953 x 2
2260
Challenger-1760
2400KT
Pistols x 6
2300KT
2250
Daisy 747
Colt SAA
Beeman P17
SOCOM Gear Gemtech Oasis (airsoft - does this count?)
Quote from: mudduck48 on February 12, 2016, 03:04:00 AM
I was thinking about this today also. I think that I have enough. When you start out, you don't think enough is enough. But, I just realized I have more than I can shoot. That is why I can't hit anything. I do not use one or two guns enough to get the feel of the trigger and the sights. So, this is enough. :P
I like your answer Duck, I guess that is why in a place far far away and a long long time ago I found a machine gun ideal to take care of business as needed...
Quote from: Trophyhunter49 on February 12, 2016, 03:45:15 AM
:o Oh No !! Duck you know that you will see another one later and you'll just have to have it !! ;D ;D ;D ;D
Well, you were right. Just bought 3 more guns. I'm a sucker for a good deal. 2 38T's and a 38C. O-Boy, more paper weights. Now, if I could just find the seal kits at a good price. :P
Quote from: mudduck48 on February 16, 2016, 04:22:16 AM
Well, you were right. Just bought 3 more guns. I'm a sucker for a good deal. 2 38T's and a 38C. O-Boy, more paper weights. Now, if I could just find the seal kits at a good price. :P
Told you so !! ;) ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Quote from: RC1947 on December 23, 2015, 11:43:34 PM
22 pistols, 8 rifles. RC
And about a couple of doz. scopes! LoL!
Near that. But wait until next week when I can show off the incredible pistol I have coming my way from California. A site that offers a 16% off coupon, and there's no way I was going to turn that down. RC
Cut It Out RC!
I wonder what I'm going to have to buy now?
Hopefully we can't have it in Canada!
More guns, O-boy. I said, no more and I just bought 3 more. :P
Quote from: mudduck48 on February 19, 2016, 02:48:57 AM
More guns, O-boy. I said, no more and I just bought 3 more. :P
;D ;D ;D ;D Told you so !! ;D ;D ;D ;D ;D ;D ;D ;D ;D
Yes, you did. And I went to Wally world today and bought 6 more tins of the EX pellets. :-*
Quote from: ejackyou on February 19, 2016, 01:56:20 AM
Cut It Out RC!
I wonder what I'm going to have to buy now?
Hopefully we can't have it in Canada!
Oh yeah, it's sitting in Canada too - I made sure to check for you!! RC
currently at 3 A benjamin Titan NP rifle, 1322, and a crosman raven for my son. Will probably end up with at least a couple more 13xx before too long.
Wife counted and says I have two......two many. ;D
All I heard was two...which sounds VERY reasonable...I should get another one. :)
Al
Sounds reasonable to me Al ;D ;D ;D ;D ;D
Not a single airgun for me..I left them all in the Philippines :)
One to many and not enough!! ;D ;D ;D ;D
Quote from: Gippeto on March 04, 2016, 01:49:29 PM
Wife counted and says I have two......two many. ;D
All I heard was two...which sounds VERY reasonable...I should get another one. :)
Al
I'll second the "another one".....that makes it another two ;D
And where are you Crossliner???
Quote from: targettgii on March 09, 2016, 05:28:53 AM
And where are you Crossliner???
Same country as you are sir :-*
Quote from: crossliner on March 07, 2016, 06:00:37 AM
Not a single airgun for me..I left them all in the Philippines :)
? are you going back ... ?
Quote from: KevinP on March 09, 2016, 06:07:38 PM
? are you going back ... ?
Maybe for a vacation Mr. Kevin..Me and my family are immigrants btw..I kind of like it here and so does my family.
Quote from: crossliner on March 10, 2016, 03:13:18 PM
Maybe for a vacation Mr. Kevin..Me and my family are immigrants btw..I kind of like it here and so does my family.
Really glad you are finally here. :-*
Do you think you will eventually be able to bring your airgun stash over here? Sure hope so as you have some beauties. :)
Carl
Quote from: crossliner on March 10, 2016, 03:13:18 PM
Maybe for a vacation Mr. Kevin..Me and my family are immigrants btw..I kind of like it here and so does my family.
Welcome to America ... :-*
Quote from: quickster47 on March 10, 2016, 03:14:58 PM
Really glad you are finally here. :-*
Do you think you will eventually be able to bring your airgun stash over here? Sure hope so as you have some beauties. :)
Carl
I was thinking the same thing. Welcome aboard! RC
Ditto....Welcome......Stick around a while :-*
:) Great !! Just stay and send for all your stuff and make this HOME ! :-*
Thanks gents :-* My toys are to remain in the Philippines though..I am going to buy some stuff here particularly a thumbhole walnut stock for my Air Arms S500 ( available at PA) or the laminated one that is paired with the S510 AA Ultimate Sporter..I was thinking of bringing over some of my accessories but got hesitant as US customs may frown on it lol! Thanks again for the warm welcome sirs.
Quote from: crossliner on March 10, 2016, 09:54:12 PM
Thanks gents :-* My toys are to remain in the Philippines though..I am going to buy some stuff here particularly a thumbhole walnut stock for my Air Arms S500 ( available at PA) or the laminated one that is paired with the S510 AA Ultimate Sporter..I was thinking of bringing over some of my accessories but got hesitant as US customs may frown on it lol! Thanks again for the warm welcome sirs.
Bummer about all those nice toys having to remain at your old homestead. But then that does give you a chance to start over and build a new collection.
Carl
Unfortunately there are no airgunners this side of the US, Mr. Quick..Might take up archery :-*
Quote from: crossliner on March 11, 2016, 11:49:16 PM
Unfortunately there are no airgunners this side of the US, Mr. Quick..Might take up archery :-*
? which side are you on, ???
Really, mystery man, where are you in the US? Why are you in the US? We thought your home was in the Philippines. ??? ??? ???
Quote from: crossliner on March 11, 2016, 11:49:16 PM
Unfortunately there are no airgunners this side of the US, Mr. Quick..Might take up archery :-*
Mister crossliner, if you are going to consider taking up archery then you might want to seriously consider mixing your airgun love with archery and build yourself a 2240 Arrow airgun. I've been thinking about one for a couple of years. And here is some information to wet you appetite.
Carl
http://www.network54.com/Forum/275684/thread/1454474336/last-1455059012/View+Thread (http://www.network54.com/Forum/275684/thread/1454474336/last-1455059012/View+Thread)
Haha yes I am from the Phils. but right now I am in the USA..I am in New Mexico gents.
I am still getting the feel of things here but I like this country..Everything is so new here we have to do everything from cooking to washing and etc..Back in the Phils. we had hired hands to do everything for us :-*
Mr. Quick there are doctors and nurses here who are fond of shooting, I will hook up with them soon :-*
Even beer is highly regulated I have to show them my papers lol!
Welcome Crossliner!!! :)
New Mexico? Get on your computer and check out Showlow, AZ. I my opinion, it is gods country. Really nice place in this USA. Just get on highway 60 and head west, you will come to Showlow,AZ.
http://showlowaz.gov/ (http://showlowaz.gov/)
updated as of 06/27/2016
32 Rifles
Rifle Photobucket Slideshow (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Rifle%20Collection)
42 Pistols
Pistol Photobucket Slideshow (http://s14.photobucket.com/user/rws53/slideshow/Pellet%20Pistol%20Collection)
:-* rws_53 very nice looking shooters! :-*
Dang dude :-* :-*
He keeps going, he might catch up to Crosshairs. ;)
Assuming we are only talking air guns, three.
one stock Crosman 2240 22
one stock Benjimen trail NP 2 22
one Old daisy 177 BB pump parts put barrel to an air chuck and my air compressor loaded it with salt to shoot flys. Could not tell if the salt or air burst reached the fly first but they disappear. ;)
There can be only one answer - not enough!
Quote from: CraigH on June 28, 2016, 12:33:05 AM
There can be only one answer - not enough!
Winner - Winner!!! We have the correct answer!!!
;D :D ;D :D ;D :D ;D :D ;D
Carl
Give him time, the bug will bite him and he will catch up. :P
:) As I have said before --- To many and no where near enough !! ;D ;D ;D ;D ;D ;D
No where near enough ;) :-* :-* :-*
Im over 150 air guns now.
Mike
It's a family thing, more guns than she who cooks the meals thinks I needs, less guns than I who eats those meals thinks I needs :-* :-* :-* :-* :-*
2 more since the last time I posted here. I might need counseling more than once a week :D
Quote from: Crosshairs on July 20, 2016, 07:58:23 PM
Im over 150 air guns now.
Mike
Before you faded out, you had about 114. Show us your new guns. :)
My meager collection since last summer.
(http://i.imgur.com/0PoZNS9.jpg?1)
I make the bolt handles, front pivot pins and now the hollow bolts. I also polish the trigger groups. No internal mods yet.
(http://i.imgur.com/uokW67o.jpg?1)
My first attempt at a hollow bolt wasn't successful.
(http://i.imgur.com/P4lCe2D.jpg?1)
I also have a Discovery .22 and a Marauder in .25 cal. Got a Ruger Hawk springer, not a favorite though. I don't think I have an addiction? ???
Is that a Winchester model 61 .22 rifle up there at the top?
I took a look at what I have:
Rifles:
Airforce:
.22 Talon 18" barrel
.25 Red Condor SS 18" barrel
.25 Red Taldor SS 24" barrel, Maddog stock, carbon bottle, extreme valve
.25 Talon P 12" barrel
.177 Blue Edge
Wicked Airguns:
.030 Flex
Benjamin:
.25 Disco #1 BnM Breech, MRod barrel & trigger group, Challenger stock
.25 Disco #2 w/ LW barrel, MRod trigger group, Boyd's laminated stock
.22 Disco #3 Stock barrel, BnM breech, MRod trigger group, Boyd's laminated stock
.22 Prod
NP Trail XL .22
Chinese:
QB 2079 HPA, .22
QB 78 Deluxe HPA .177
Bam B51.22
Bam B50 .22
Xisco XS25 .22
Crosman:
2400KT Tinkers Toy .22
2400KT Tinkers Toy II .177
2560 Custom .25 HPA 12" TJ's barrel
2300S .177 Pistol
1750B .177 Pistol CO2
2250B CO2 Pistol
SSP250 .30 Pistol CO2
Glen
Too many. Need to sell some off to get some more.LOL :-*
Duck odd that you say that. Missing are my 3 13xx pistols, a Condor SS.22, .25 Hatsan AT4W Long, and a few more.
Glen
Is that a Winchester model 61 .22 rifle up there at the top?
Indeed it is. :)
I have the 7 listed and one more that I am building plus another that I am thinking about. :-* :-* :-*
Bloated to around 100 now. Yep, NEED to start thinning the herd.
:)
Airguns? 26 last count... or was it 27.... and one on the way.
My post on this topic a few years ago, and the reply following:
https://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,12369.msg217104.html#msg217104
:)
I haven't been at it nearly as long as some of you. I have only a (mostly) stock Crosman 1322, and this highly customized gem of a 1322, with a dozen things that are not stock. [Edit: Got a .25 Marauder in Nov 2020, way more powerful.]
Crosman: 1377, 2240, 2289, T4, Nitro Venom, Pumpmaster 760
Hatsan: Supercharger 25 .177, 125TH, AT44 PA .25, AT44 Tact .25, Carnivore .357
Evanix: Rainstorm II .357
So, 12 ( little bit of everything: pumpers, CO2, break barrels, and PCP's)
I hover around 100.
Have about 60 give or take, give some away and buy some more. Always on look out for more orphans, crosmans 1322 or1377 and Beeman esp. Peashooterjoe
No way I could post this info my wife does occasionally check this forum she is a former IPSC shooter and a great shot at a running target :) :)
Hi guys!
Over 80 functionnals (don't know how much exactly), and a few in bits. I recently acquired an HPA compressor, so the count ''may'' go up :)
I've never thought about counting them ??? I suppose I should some time. I do have more airguns than powder burners.