Print Page - .30 cal.

Title: .30 cal.
Post by: Trophyhunter49 on January 12, 2016, 05:04:04 PM

Ok Guys, I'm looking for a .30 cal. barrel for my next build! I've sent Green Mt. email and they want just sale ONE barrel ! Lothar Walther's barrels are .670 ext. diam. and I need 1/2 in. diam. and I don't think they have the port in them either! If you know where I can get one ready to go please let me know. I have one of Baker's big bore breech now and that's whatI want the barrel to fit.

Title: Re: .30 cal.
Post by: BillK on January 12, 2016, 07:22:06 PM

You might check w/Roy @
http://www.mountainaircustomairguns.com/ (http://www.mountainaircustomairguns.com/)

Title: Re: .30 cal.
Post by: 1377x on January 12, 2016, 10:20:46 PM

Quote from: BillK on January 12, 2016, 07:22:06 PM
You might check w/Roy @
http://www.mountainaircustomairguns.com/ (http://www.mountainaircustomairguns.com/)

yep,
http://www.airguns.net/classifieds/show_ad.php?adNum=113039&adSort=&StartingAd=0&NumberOfPages=6 (http://www.airguns.net/classifieds/show_ad.php?adNum=113039&adSort=&StartingAd=0&NumberOfPages=6)

Title: Re: .30 cal.
Post by: Gippeto on January 13, 2016, 01:56:51 AM

Could help you out if you don't mind shipping to/from Canada. Have .30 pellet, .308 and 9mm Tj's liners @ 24"loa on hand and can machine to suit.

Just need the receiver to fit it too...and the bolt if you have one. Figure $200 for the barrel/machining and ~$35 for a bolt and handle in stainless if needed.

Price plus actual shipping.

Al

Title: Re: .30 cal.
Post by: Trophyhunter49 on January 13, 2016, 02:14:26 AM

Quote from: Gippeto on January 13, 2016, 01:56:51 AM
Could help you out if you don't mind shipping to/from Canada. Have .30 pellet, .308 and 9mm Tj's liners @ 24"loa on hand and can machine to suit.

Just need the receiver to fit it too...and the bolt if you have one. Figure $200 for the barrel/machining and ~$35 for a bolt and handle in stainless if needed.

Price plus actual shipping.

Al

PM sent!!

Title: Re: .30 cal.
Post by: mudduck48 on January 13, 2016, 02:42:16 AM

P-dogs, look out! There is a new build heading your way! :-*

Title: Re: .30 cal.
Post by: Trophyhunter49 on January 13, 2016, 03:00:09 AM

Quote from: mudduck48 on January 13, 2016, 02:42:16 AM
P-dogs, look out! There is a new build heading your way! :-*

;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: WyoMan on January 13, 2016, 03:28:37 AM

Quote from: Trophyhunter49 on January 13, 2016, 02:14:26 AM
PM sent!!

+1...the pics I saw of Al's barrels and bolts were pure eye candy...but I'm all in for that sort of work. good luck on the big bore build Mike!

Title: Re: .30 cal.
Post by: Trophyhunter49 on January 13, 2016, 03:34:09 AM

Quote from: WyoMan on January 13, 2016, 03:28:37 AM
+1...the pics I saw of Al's barrels and bolts were pure eye candy...but I'm all in for that sort of work. good luck on the big bore build Mike!

Man it's good to see you back WyoMan ! Been missing you on here ! What you got going on ?

Title: Re: .30 cal.
Post by: mudduck48 on January 13, 2016, 03:56:41 AM

WyoMan, welcome back!! :-* :-*

Title: Re: .30 cal.
Post by: WyoMan on January 13, 2016, 03:57:34 AM

Quote from: Trophyhunter49 on January 13, 2016, 03:34:09 AM
Man it's good to see you back WyoMan ! Been missing you on here ! What you got going on ?

Retired a month ago...a year sooner than planned. Mostly good, some bad. I've been building gas guns lately:
a 2550 and 2250

(http://i1249.photobucket.com/albums/hh508/WyoMan/2550%20Gas%20Gun/2550-1_zps0vnb5rpk.jpg) (http://s1249.photobucket.com/user/WyoMan/media/2550%20Gas%20Gun/2550-1_zps0vnb5rpk.jpg.html)
(http://i1249.photobucket.com/albums/hh508/WyoMan/2550%20Gas%20Gun/Biovalve%20Gun/finished2250_zps3otcymqx.jpg) (http://s1249.photobucket.com/user/WyoMan/media/2550%20Gas%20Gun/Biovalve%20Gun/finished2250_zps3otcymqx.jpg.html)

took me a week to remember my login ;D

Title: Re: .30 cal.
Post by: WyoMan on January 13, 2016, 03:59:13 AM

Quote from: mudduck48 on January 13, 2016, 03:56:41 AM
WyoMan, welcome back!! :-* :-*

thanks duck!

Title: Re: .30 cal.
Post by: mudduck48 on January 13, 2016, 04:02:42 AM

Quote from: WyoMan on January 13, 2016, 03:57:34 AM
Retired a month ago...a year sooner than planned. Mostly good, some bad. I've been building gas guns lately:
a 2550 and 2250

(http://i1249.photobucket.com/albums/hh508/WyoMan/2550%20Gas%20Gun/2550-1_zps0vnb5rpk.jpg) (http://s1249.photobucket.com/user/WyoMan/media/2550%20Gas%20Gun/2550-1_zps0vnb5rpk.jpg.html)
(http://i1249.photobucket.com/albums/hh508/WyoMan/2550%20Gas%20Gun/Biovalve%20Gun/finished2250_zps3otcymqx.jpg) (http://s1249.photobucket.com/user/WyoMan/media/2550%20Gas%20Gun/Biovalve%20Gun/finished2250_zps3otcymqx.jpg.html)

took me a week to remember my login ;D

I see you still have your touch. Nice. ;)

Title: Re: .30 cal.
Post by: Monkeydad1969 on January 13, 2016, 04:44:08 AM

Quote from: Trophyhunter49 on January 13, 2016, 03:00:09 AM
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

HEY!!!!! ANY P-DAWGS NEED LOOKING OUT ARE MY GOOD TIME!!!!! ;D

Title: Re: .30 cal.
Post by: targettgii on January 13, 2016, 06:04:26 AM

Nice to see you back Wyoman and those builds sure are pretty. :-* :-* :-*

Title: Re: .30 cal.
Post by: Noah on January 13, 2016, 09:30:58 AM

Someday I will be fortunate enough to get one of WyoMan's rigs - preferably one of his Co2 shooters :-\

Title: Re: .30 cal.
Post by: droid on January 28, 2016, 07:30:30 PM

Awwww now I really want a .30 cal

It might not be strictly allowed in the UK but that was never a barrier before ;)

Title: Re: .30 cal.
Post by: Trophyhunter49 on January 28, 2016, 10:21:27 PM

Quote from: droid on January 28, 2016, 07:30:30 PM
Awwww now I really want a .30 cal

It might not be strictly allowed in the UK but that was never a barrier before ;)

;D ;D ;D ;D

Title: Re: .30 cal.
Post by: Trophyhunter49 on January 28, 2016, 10:24:58 PM

I just sent Al (Gippeto ) a new breech yesterday and he is goin to set up up with a .30 cal. barrel to it and then I'll be getting another one of Don Cothran's Powerhouse valves and I'll be set !! ;) ;)

Title: Re: .30 cal.
Post by: WyoMan on January 29, 2016, 02:40:36 AM

Looking forward to seeing that, TH :-* (sorry about the brief hijack)...did you get the .180 or .250" powerhouse? thanks

Title: Re: .30 cal.
Post by: Trophyhunter49 on January 29, 2016, 03:36:32 AM

Haven't got it yet . Going to get the .250 I have the .180 in my .25 cal. and its making 924 fps with 48gr pellet.

Title: Re: .30 cal.
Post by: 1377x on January 29, 2016, 08:40:40 PM

Can't wait to see the finished product

Title: Re: .30 cal.
Post by: Monkeydad1969 on January 30, 2016, 07:14:42 AM

Trying to beat me to the punch I see, Mike.

Title: Re: .30 cal.
Post by: Gippeto on January 30, 2016, 04:58:43 PM

Should end up with a good bit of thump using the Cothran valve...and still be easy to cock. Good choice. :-*

Figuring transfer port ~ .220" or so....just under 75%.

Can anyone confirm outer diameter of transfer port "flat" milled into valve body is 3/8"??

Al

Title: Re: .30 cal.
Post by: Trophyhunter49 on January 30, 2016, 05:30:38 PM

I think Joe (Monkeydad19690 has a Cothran valve with and he could tell you !! ???

Title: Re: .30 cal.
Post by: Monkeydad1969 on January 31, 2016, 01:14:47 AM

Wish I could, but when I took the Can Gun apart last I put it back together with blue loc-tite. For safety reasons. I have a delrin TP for the 3/8". You want that OD?

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 04, 2016, 02:43:09 AM

Well i got me a stainless Disco tube and a Don Cothran Power House valve with .250 port ordered. Now the wait begins !! ;) ;D ;D ;D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 04, 2016, 05:54:42 AM

Well, Mr. Show-off. Bring it on. Can't wait to see this new build, Mr. Moneypants! ;)

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 04, 2016, 04:10:04 PM

Quote from: Monkeydad1969 on February 04, 2016, 05:54:42 AM
Well, Mr. Show-off. Bring it on. Can't wait to see this new build, Mr. Moneypants! ;)

;D ;D ;D ;D ;D ;D ;D ;D ;)

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 05, 2016, 04:07:11 AM

Guess I need to build out mine this year and the .357.

Title: Re: .30 cal.
Post by: srbsmartie on February 06, 2016, 02:05:10 AM

I just ordered a big bore breech from Baker as well, I would like to get either a .30 cal barrel or 9mm barrel from Track of the Wolf .
The gun I had planned on converting is my 1322, I may have missed it somewhere but what gun are you using as your base?
I know the 1322 is pretty low powered for a big bore, but I really just wanted a proof of concept to see if I can do it. I have ordered a flat top piston and valve combo and a Boss transfer port from Alchemy Airwerks to bump up the available power. I plan onupgrading the hammer and hammer spring too along with possibly a power adjuster too. Is the barrel you have made specific for airguns, or is it a firearm barrel?
Craig

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 06, 2016, 02:32:00 AM

I'm having Don Cothran building me a stainless steel Disco tube , so i would say a Disco is the base. The barrel is one of TJ's .

Title: Re: .30 cal.
Post by: 1377x on February 06, 2016, 04:50:27 AM

Track of wolf gets there barrel liners from tj's

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 06, 2016, 05:15:14 AM

Quote from: srbsmartie on February 06, 2016, 02:05:10 AM
I just ordered a big bore breech from Baker as well, I would like to get either a .30 cal barrel or 9mm barrel from Track of the Wolf .
The gun I had planned on converting is my 1322, I may have missed it somewhere but what gun are you using as your base?
I know the 1322 is pretty low powered for a big bore, but I really just wanted a proof of concept to see if I can do it. I have ordered a flat top piston and valve combo and a Boss transfer port from Alchemy Airwerks to bump up the available power. I plan onupgrading the hammer and hammer spring too along with possibly a power adjuster too. Is the barrel you have made specific for airguns, or is it a firearm barrel?
Craig

Alright, now we all really want to see this build. :-*

Title: Re: .30 cal.
Post by: srbsmartie on February 06, 2016, 06:03:37 PM

I'll take pictures, I've only had the thing about 3 weeks and already I want MOAR!!!
I figure if it shoots decent enough I can use the breech on a Disco build.

Craig

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 07, 2016, 08:55:19 AM

True...but I want to see a 13XX shoot big. You have to make a vid! :-*

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 17, 2016, 01:56:13 AM

;) Up date on the .30 cal. build !!! Got PM from Gippeto ( Al ) today everything going good and also update from Don ,stanless steel disco tube and valve coming along good! :) :) Want be long everything will come in and I'll be like a kid at Christmas ! ;D ;D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: mudduck48 on February 17, 2016, 02:51:58 AM

O-BOY! :)

Title: Re: .30 cal.
Post by: quickster47 † on February 17, 2016, 03:27:10 AM

Mike sounds like a really neat build you are planning out.

I built a .25 caliber race gun using one of Gippeto's barrels and couldn't have been more pleased with his work. He is a fine craftsman.

So hurry up and start posting your pictures so we can all enjoy this with you. ;)

Carl

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 17, 2016, 03:39:01 AM

Quote from: quickster47 on February 17, 2016, 03:27:10 AM
Mike sounds like a really neat build you are planning out.

I built a .25 caliber race gun using one of Gippeto's barrels and couldn't have been more pleased with his work. He is a fine craftsman.

So hurry up and start posting your pictures so we can all enjoy this with you. ;)

Carl

Just as soon as I start gettin stuff in!! ;) ;)

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 17, 2016, 04:44:33 AM

Quote from: Trophyhunter49 on February 17, 2016, 01:56:13 AM
;) Up date on the .30 cal. build !!! Got PM from Gippeto ( Al ) today everything going good and also update from Don ,stanless steel disco tube and valve coming along good! :) :) Want be long everything will come in and I'll be like a kid at Christmas ! ;D ;D ;D ;D ;D ;D ;D

Nice---Show-off!

Title: Re: .30 cal.
Post by: WyoMan on February 17, 2016, 04:47:19 AM

Quote from: Trophyhunter49 on February 17, 2016, 03:39:01 AM
Just as soon as I start gettin stuff in!! ;) ;)

Well Mike...we want to see it now! Guess we have less patience than you :D

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 17, 2016, 04:55:04 AM

Quote from: WyoMan on February 17, 2016, 04:47:19 AM
Well Mike...we want to see it now! Guess we have less patience than you :D

;D ;D ;D ;D ;D ;D ;D ;D ;D ;D I'm ready to get started !

Title: Re: .30 cal.
Post by: Gippeto on February 17, 2016, 05:30:52 AM

;)

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 17, 2016, 09:48:44 PM

Quote from: Monkeydad1969 on February 17, 2016, 04:44:33 AM
Nice---Show-off!

;D ;D ;D ;D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 17, 2016, 09:58:52 PM

Quote from: Trophyhunter49 on February 17, 2016, 09:48:44 PM
;D ;D ;D ;D ;D ;D ;D ;D ;D

I'll be giving you a call to get this settled! 8)

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 19, 2016, 10:19:43 PM

:) :) :) :) :) Happy Happy Happy !!!!! Well I got my Don Cothran valve and stainless tube in today!! Man I love it when I boxes in the mail with air gun parts in them !!! ;) ;) Here a couple of pics of the NEW tube with the valve already installed! :)

Title: Re: .30 cal.
Post by: tinker on February 20, 2016, 02:02:38 AM

Nice Mike!
If that came in the mail I would taken something apart just to test the valve and air tube!

Glen

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 20, 2016, 03:22:42 AM

Very nice.

Title: Re: .30 cal.
Post by: Paul on February 20, 2016, 03:41:57 PM

looking forward to the finished article and the chrono test.

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 20, 2016, 05:29:27 PM

Quote from: tinker on February 20, 2016, 02:02:38 AM
Nice Mike!
If that came in the mail I would taken something apart just to test the valve and air tube!

Glen

I did ! I tested the set up with a a breech and barrel . I put it all together and filled it with 3500 PSI and let it sit for and hour and NO leaks were found . Then I degas it and set it aside untill the rest of the parts get here. I should have told this at first ,it did not come with the fill adapter! This pic. was made just before I set it aside!! Don always test his parts before shipping them too !! :-*

Title: Re: .30 cal.
Post by: 1377x on February 20, 2016, 06:29:26 PM

I read somewhere that the p-rod fill adapter fits and has a lower profile

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 20, 2016, 07:29:36 PM

Quote from: 1377x on February 20, 2016, 06:29:26 PM
I read somewhere that the p-rod fill adapter fits and has a lower profile

Yes Sir, The PROD and the Disco have the same diameter , Also same as the 22XX tubes! That's what makes it so easy to build an inexpensive PCP !

Title: Re: .30 cal.
Post by: WyoMan on February 21, 2016, 04:17:04 AM

Hey TH...
Could you use one of these?...a Wyo-port:
(http://i1249.photobucket.com/albums/hh508/WyoMan/3050/TP1_zpsut0yq95a.jpg) (http://s1249.photobucket.com/user/WyoMan/media/3050/TP1_zpsut0yq95a.jpg.html)

Fits in the big valve like this:
(http://i1249.photobucket.com/albums/hh508/WyoMan/3050/TP2_zpsfbab5gno.jpg) (http://s1249.photobucket.com/user/WyoMan/media/3050/TP2_zpsfbab5gno.jpg.html)

Is just marginally smaller than .250" i.d. The length will be too long but you can cut (sand) to fit:
(http://i1249.photobucket.com/albums/hh508/WyoMan/3050/TP3_zpscerauhcx.jpg) (http://s1249.photobucket.com/user/WyoMan/media/3050/TP3_zpscerauhcx.jpg.html)

pm me if you can use one and I'll mail it with a couple extra o-rings - guaranteed not to leak - sort of :D

Good luck and keep posting the progress :-*

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 21, 2016, 04:21:00 AM

Hey Wyo,

If you have anymore left, I'd like to buy one for my valve. It's the .250 TP.

Joe

Title: Re: .30 cal.
Post by: WyoMan on February 21, 2016, 04:32:11 AM

Quote from: Monkeydad1969 on February 21, 2016, 04:21:00 AM
Hey Wyo,

If you have anymore left, I'd like to buy one for my valve. It's the .250 TP.

Joe

pm sent - thanks

Title: Re: .30 cal.
Post by: Gippeto on February 21, 2016, 10:20:42 PM

Those around 5/16" length + the orings? 010 presumably?

Thx

Al

Title: Re: .30 cal.
Post by: WyoMan on February 22, 2016, 01:24:34 AM

That's pretty close, Al
Sleeve is .270" long but I went with metric o-rings - 1.5mm x 6.5mm. They have a larger i.d. and slightly smaller o.d. than the -010...some room for the compression.
The oal is .388". Figuring the o-rings can compress about 50 thou gives .338"...
Cothran c-b .150
Tube .063
Breech plus BBL c-b .125

Sound like it's in the ball park?
thanks

Title: Re: .30 cal.
Post by: Gippeto on February 22, 2016, 03:51:13 AM

Give or take...I made up four "tubes" and put a couple o-rings in the package with them. Mike will have to take them down to correct length.

Al

Title: Re: .30 cal.
Post by: WyoMan on February 22, 2016, 04:12:56 AM

That's the best way...take down to fit. We don't know if all the valve / tube tolerances will be the same so there are too many variables.
They certainly aren't a "one size fits all" but the o-rings do allow about a .040" range +/- ...so we're playing horse shoes instead of darts :)
thanks

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 27, 2016, 12:56:01 AM

:) Here are a few pics. of my .30 cal. build! Still waiting on the upper , it's in the mail and will be here soon ! Ya'll know how I am so just take a look at these pics!!

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 27, 2016, 01:29:35 AM

Wow...little jealous. :(

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 27, 2016, 02:02:21 AM

OOOPS missed one !!

Title: Re: .30 cal.
Post by: mudduck48 on February 27, 2016, 02:23:28 AM

Looks like a good build so far. You will be eating P-dog burgers real soon. ;)

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 27, 2016, 03:47:43 AM

Quote from: mudduck48 on February 27, 2016, 02:23:28 AM
Looks like a good build so far. You will be eating P-dog burgers real soon. ;)

Yuck!

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 27, 2016, 03:56:42 AM

Quote from: mudduck48 on February 27, 2016, 02:23:28 AM
Looks like a good build so far. You will be eating P-dog burgers real soon. ;)

NO Pdog where I live!! :)

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 27, 2016, 04:14:22 AM

Then bring your butt to Colorado, and bring your shooters, too.

Title: Re: .30 cal.
Post by: mudduck48 on February 27, 2016, 04:22:40 AM

Quote from: Trophyhunter49 on February 27, 2016, 03:56:42 AM
NO Pdog where I live!! :)

Then armadillo burgers. Coon burgers. :-*

Title: Re: .30 cal.
Post by: Monkeydad1969 on February 27, 2016, 04:27:47 AM

Quote from: mudduck48 on February 27, 2016, 04:22:40 AM
Then armadillo burgers. Coon burgers. :-*

WTHeck Mud?!?!?!?!? LOL! :D ;D :-*

Title: Re: .30 cal.
Post by: quickster47 † on February 27, 2016, 04:38:16 AM

You can sure tell ol' mudduck is from California for sure by his menu selections. ;D

Carl

Title: Re: .30 cal.
Post by: mudduck48 on February 27, 2016, 04:48:26 AM

You got a problem with that? I got trophyhunter , who lives in MS, mixed up with monkeyday, who lives in CO. In Co. you will get P-dogs, In MS you might find armadillos and raccoons. In my back yard you get treerats, raccons and possums. :P

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 27, 2016, 12:06:28 PM

Quote from: mudduck48 on February 27, 2016, 04:22:40 AM
Then armadillo burgers. Coon burgers. :-*

Coon burgers !! :-* I'll have 2 with cheese! :)

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 27, 2016, 12:10:42 PM

:) We got armadillos and coons and tree rats and ground hogs too !! Now BBQ coon an't bad ! :-*

Title: Re: .30 cal.
Post by: quickster47 † on February 27, 2016, 01:09:07 PM

Being that I was borned in Mississippi and have had opossum fixed by our maids, I can say you haven't lived until you give it a try. A little bit grissly but quite tasty.

Carl

Title: Re: .30 cal.
Post by: srbsmartie on February 27, 2016, 09:33:32 PM

Oh boy, I am so super jealous of your build! I love the looks of the stainless tube, and the really big transfer port hole in the valve.
Good looking gun so far :)

Craig

Title: Re: .30 cal.
Post by: Trophyhunter49 on February 28, 2016, 02:02:18 AM

Quote from: srbsmartie on February 27, 2016, 09:33:32 PM
Oh boy, I am so super jealous of your build! I love the looks of the stainless tube, and the really big transfer port hole in the valve.
Good looking gun so far :)

Craig

Thanks !! :) Now the stainless air tube is going to be done in Cerakote !! Just don't know what color yet !! ???

Title: Re: .30 cal.
Post by: tinker on February 28, 2016, 10:08:46 PM

Looking good Mike :-*

Glen

Title: Re: .30 cal.
Post by: 1377x on February 29, 2016, 10:58:45 PM

Coming along quicker than I thought. Can't wait for the range report now

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 01, 2016, 02:19:15 AM

:) :) Barrel and breech came in today!! :) :) :) Didn't get to mess with it much, had a lot going on!! :( :( Going tomount an old scope I have on it because the new one as not came in yet !! Will shoot it a bit and then take it back apart and take it to my son for the cerekota paint job!! I think I'm going with just a plan jane gun medal gray and let that be it!! IF he doesn't deside to get wild with it !! ;D ;D ;D ;D More to come !
Thanks
Guys

Mike

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 01, 2016, 02:57:01 AM

DARNIT! PICS, OLD MAN!

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 01, 2016, 04:07:25 AM

Quote from: Monkeydad1969 on March 01, 2016, 02:57:01 AM
DARNIT! PICS, OLD MAN!

Keeps you wondering don't ! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 01, 2016, 04:43:56 AM

I'll be on my way to you, you stubborn old son of Battle-ax! >:(

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 01, 2016, 09:25:33 AM

Quote from: Monkeydad1969 on March 01, 2016, 04:43:56 AM
I'll be on my way to you, you stubborn old son of Battle-ax! >:(

;D ;D ;D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: quickster47 † on March 01, 2016, 02:45:52 PM

Watch your manners TH. I'm in Mississippi for the next week or so and not that far from you and might just pay you a friendly government revenuers visit. ;D ;D ;D

Carl

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 01, 2016, 04:17:30 PM

Quote from: quickster47 on March 01, 2016, 02:45:52 PM
Watch your manners TH. I'm in Mississippi for the next week or so and not that far from you and might just pay you a friendly government revenuers visit. ;D ;D ;D

Carl

Get 'em, Carl. Confiscate all his shooters. :-*

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 01, 2016, 09:29:25 PM

No work on the .30 cal. today !! weather been bad and I'm down in my back and been in bed most of the day ! :( Maybe be better tomorrow ??? I'm really wanting to get this thing over to John's shop and put some GUN MEDAL GREY cerakote on it and put it in SHOOTING mode! ;) Heading backto bed for now !! :( :( :(

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 01, 2016, 11:00:31 PM

Feel better. I know the burdens you must have with all these new builds. I'll go ahead and take over for you. :-*

Title: Re: .30 cal.
Post by: quickster47 † on March 02, 2016, 12:15:48 AM

Quote from: Monkeydad1969 on March 01, 2016, 11:00:31 PM
Feel better. I know the burdens you must have with all these new builds. I'll go ahead and take over for you. :-*

And if Joe ;) can't do it you supply the parts and I'll take care of making it happen. :P Gots to help our brothers keep going for sure. :)

Carl

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 02, 2016, 02:31:37 AM

Quote from: quickster47 on March 02, 2016, 12:15:48 AM
And if Joe ;) can't do it you supply the parts and I'll take care of making it happen. :P Gots to help our brothers keep going for sure. :)

Carl

True. :-*

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 02, 2016, 03:23:02 AM

Ya'll wouldn't kick a man when he's down now would you !! ;) ;) ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: mudduck48 on March 02, 2016, 04:03:00 AM

Quote from: Trophyhunter49 on March 02, 2016, 03:23:02 AM
Ya'll wouldn't kick a man when he's down now would you !! ;) ;) ;D ;D ;D ;D

Nope. Take your chicken soup and get to feeling better. ;)

Title: Re: .30 cal.
Post by: Gippeto on March 02, 2016, 04:57:42 AM

Get better soon Mike....and..... ;)

(http://i245.photobucket.com/albums/gg76/gippeto_album/IMG_3860_zps65fd04ba.jpg) (http://s245.photobucket.com/user/gippeto_album/media/IMG_3860_zps65fd04ba.jpg.html)

Al

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 02, 2016, 05:29:46 AM

Quote from: Trophyhunter49 on March 02, 2016, 03:23:02 AM
Ya'll wouldn't kick a man when he's down now would you !! ;) ;) ;D ;D ;D ;D

Actually I'd do that. It's for the air shooters! ;) :D :o :-*

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 08, 2016, 12:22:56 AM

Stil waiting on scope to come in ! >:( >:( >:( Done a little shooying with the .30 this evening, at 25 yds it's shooting through 1/8 treadplate alum. with no problem !! Will try to put a few rounds through the crony Tue. and see what kind of numbers it's getting. :)

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 08, 2016, 01:48:34 AM

Need pics, boy! ???

Title: Re: .30 cal.
Post by: Gippeto on March 08, 2016, 02:54:38 AM

Sounds pretty snotty Mike. 8)

Hearing lots of good things about that Cothran valve..... :-*

Al

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 08, 2016, 04:08:52 AM

Quote from: Gippeto on March 08, 2016, 02:54:38 AM
Sounds pretty snotty Mike. 8)

Hearing lots of good things about that Cothran valve..... :-*

Al

I'm here to tell you that the Cothran valves are well worth the money !! :-* The two I have now I'm really well pleased with them !! :) :)

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 08, 2016, 04:09:59 AM

Quote from: Monkeydad1969 on March 08, 2016, 01:48:34 AM
Need pics, boy! ???

Pics. coming Tue. so just hold your HORSES BIG BOY ! ;D ;D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 08, 2016, 05:11:10 AM

Quote from: Trophyhunter49 on March 08, 2016, 04:09:59 AM
Pics. coming Tue. so just hold your HORSES BIG BOY ! ;D ;D ;D ;D ;D ;D ;D

I'll be looking for them.

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 08, 2016, 08:36:50 PM

Still waiting on my scope! >:( Set up in my gun vice and shot looking down the barrel ! :D :D Not bad at 35 yds. ;) ;) Here are some pics. of the alum. It's shooting 984.6 FPS. with JSB Diabolo Exact Pellets, .30 Cal, 50.15 Grains, Domed with 107.98 FPE ! I think I got a WINNER here! ;) ;)

Title: Re: .30 cal.
Post by: mudduck48 on March 08, 2016, 08:53:59 PM

No kidding you gots a winner. 35 yds, shooting through aluminum plate, no sights. Yep. :-* :-*

Title: Re: .30 cal.
Post by: quickster47 † on March 08, 2016, 09:53:17 PM

Now that is some impressive horsepower you got on that one. Wow!!!

Carl

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 08, 2016, 10:39:22 PM

Thanks !! :) :) Just as soon as the scope gets in I'm going to post some targets ! I feel like it's going to be a TACK DRIVER ! Al done a GREAT job on the barrel and breech !! My son ( John ) is going to put Tungsten cerakote paint job on it Wed. night ! :) I can't wait to get that done and get it zeroed in !! I'm putting 3500 psi in the air tube and its getting 8 to 10 good shots out of it ! :) That in its self I think is GREAT !! :) :)

Title: Re: .30 cal.
Post by: tinker on March 08, 2016, 10:45:46 PM

Very impressive power :-*

Glen

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 09, 2016, 01:12:42 AM

Nice, sir. What hammer spring are you using? How far do you have the RVA turned in? Are you using a Disco hammer? ??? Just a few questions for you.

Joe

Title: Re: .30 cal.
Post by: 1377x on March 09, 2016, 03:34:47 AM

Wow! Impressive powerhouse

Title: Re: .30 cal.
Post by: Rualert on March 09, 2016, 03:41:59 AM

Impressive shooter and that's some serious power. As already mentioned we need pics! and how about a string or two?

Casey

Title: Re: .30 cal.
Post by: INVICTVSREX on March 09, 2016, 04:26:33 AM

the suspense waiting for the pictures is killing me

Title: Re: .30 cal.
Post by: targettgii on March 09, 2016, 05:34:15 AM

Mike don't put them through the chrony put them over it LOL. :D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 09, 2016, 07:21:23 AM

Quote from: Monkeydad1969 on March 09, 2016, 01:12:42 AM
Nice, sir. What hammer spring are you using? How far do you have the RVA turned in? Are you using a Disco hammer? ??? Just a few questions for you.

Joe

Joe , I'm using a disco spring that has been cut down and a disco hammer , the power adjuster is set REAL lite ! :-*

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 09, 2016, 07:22:18 AM

Quote from: targettgii on March 09, 2016, 05:34:15 AM
Mike don't put them through the chrony put them over it LOL. :D ;D ;D ;D ;D ;D

;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: WyoMan on March 10, 2016, 03:13:01 AM

Yep, you would get good penetration through the chrony. ;D Sounds awesome, Mike. :-* Glad you got the TP sorted out...and you did a great job getting the spring and hammer right for the valve :-*

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 10, 2016, 03:38:05 AM

Quote from: Trophyhunter49 on March 09, 2016, 07:21:23 AM
Joe , I'm using a disco spring that has been cut down and a disco hammer , the power adjuster is set REAL lite ! :-*

Love using a short spring in my 2560. They do a great job.

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 10, 2016, 03:10:19 PM

:) Well the .30 is gone to have Cerakota put on it and will be back in my hands in a few days! Then we will have some good pics. ;)

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 11, 2016, 08:23:32 PM

Well my son is down with the FLU so I'm just waiting on him to get better! Well I couldn't do a lot anyway its raining and more rain !! Goin to be like this ALL weekend ! >:( :( :( :(

Title: Re: .30 cal.
Post by: Trophyhunter49 on March 25, 2016, 04:56:36 AM

:) :) :) Finally !!! John finally got my .30 cal. parts done tonight !! :) :) I'll be putting it all together in the morning and doing some chrony work and LOTS of PICTURES !! ;D ;D ;D ;D

Title: Re: .30 cal.
Post by: Monkeydad1969 on March 25, 2016, 05:16:23 AM

Quote from: Trophyhunter49 on March 25, 2016, 04:56:36 AM
:) :) :) Finally !!! John finally got my .30 cal. parts done tonight !! :) :) I'll be putting it all together in the morning and doing some chrony work and LOTS of PICTURES !! ;D ;D ;D ;D

Alright!

Title: Re: .30 cal.
Post by: Gippeto on March 25, 2016, 08:09:21 AM

Looking forward to it. 8)

Al

Title: Re: .30 cal.
Post by: quickster47 † on March 25, 2016, 01:18:54 PM

What is up with you TH ??? Here it is nearly 7:30 am and you still have no pictures up of your new build. And we know you have all the parts.

You're slacking there big boy. :P

Carl

Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: Trophyhunter49 on January 12, 2016, 05:04:04 PM