The RJ Machine cocking handle fits the RJ breech nicely but is a little undersized for the Crosmods breech. The RJ cocking handle shaft diameter is .178" so I made a pair of replacement handles sized at .198". Both new handles fit nicely & operate smoothly. I think the handle with the large cocking knob matches the heft of the breech best but I like the look of the grooved handle as well. I had originally planned to pin the knob to the shaft but that wasn't necessary since the parts friction fit together so snugly. I'll probably make a few more handle styles and get started on a detachable front sight for the Marauder pistol. Attached are some photos of the handle making process.
AE
(http://img541.imageshack.us/img541/1230/combined.jpg)
You're correct about that new knob matching the Crosmods breech much better. Good job on that. :-* :-* :-*
I now need to make one for my Crosmods breech.
Carl
Very nice work indeed.at least some knows what there doing with a lathe. :-*
Mike
Good that,i ike the mix of ally and brass. Bet it feels solid
Take note of that die being held in the 3-jaw chuck. It was something I learned as an apprentice, but with the need for single point threading that I have been doing for years, I had forgotten that little trick! Works great too! Thanks for reminding me.
Rich
BTW: that is a sweet looking knob!
lookin good