Print Page - 2250 Breech

Title: 2250 Breech
Post by: kosmickopp on April 04, 2011, 01:56:02 AM

Is the steel breech that's on the stock 2250's the exact same as the steel breech Crosman sells to fit the 2240? It seems Crosman offers the 2250 breech as a "part" -- and the steel breech for the 2240 is offered as an "accessory" The part numbers are different. Not certain if the cost is different but the shipping for accessories is twice as much.
Any thoughts Crosman enthusiasts?

Title: Re: 2250 Breech
Post by: ChokingVictim on April 04, 2011, 02:00:14 AM

same thing. but the breech to tube screw maybe in the new or old location.

Title: Re: 2250 Breech
Post by: woody67 on April 04, 2011, 02:06:51 AM

My as2250 has the regular steel Crosman breech with the hole in the new location, which is a pain in the butt...

Title: Re: 2250 Breech
Post by: kosmickopp on April 04, 2011, 02:18:16 AM

OK... Old screw location vs. New screw location? How do I know? My 2240 is 14 months old.

Title: Re: 2250 Breech
Post by: Crosshairs on April 04, 2011, 02:51:24 AM

Old location you can get to with out removing the bolt.
Mike

Title: Re: 2250 Breech
Post by: quickster47 † on April 04, 2011, 04:17:28 AM

Once again here is a picture so you can tell the difference.

Carl

Title: Re: 2250 Breech
Post by: kosmickopp on April 04, 2011, 01:40:29 PM

Thank-you Gentlemen. You have been very helpful..

Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: kosmickopp on April 04, 2011, 01:56:02 AM