We (I) all want one, and some here have already put them together.
Let's see them .25's
Pistols and Rifles (Crosman/Benji Only)
Give us some info, i.e. Valve Mods, Barrel, TP Diameter, Pellets, Shot Count, Accuracy and any good advise you have learned.
Thanks in advance. :-*
Well this one is based on a 22xx platform by Dennis Quackenbush. It's a Daq .25cal Outlaw pistol converted to a light carbine. I have it dialed to shoot JSB Kings 25.4gr,2700psi fill,at 935fps/49.3fpe. I also shoot #3 buckshot 23.3gr,2500psi fill,at 747fps/28.8fpe.
(http://i160.photobucket.com/albums/t193/turbonoma1998/Airgunning/DSC01885.jpg)
Now that is Bad A$$. I too shot #3 out of my M-Rod.
Great looking Rifle there my friend. If you get tired of it, Hit me up. :-*
QuoteIf you get tired of it, Hit me up.
Walt,
If he gets tired of it, he could post it on here and start a bidding war!
Cheers,
Jerry
That is one seriously cool pistol/carbine you have, Turbonoma! :-*
The stock is gorgeous, gotta get me one!
Todd
very nice , i want it , ;)
Specs, pics and a vid here
http://www.crosman-air-pistol-owners-forum.com/board/index.php?topic=5448.0 (http://www.crosman-air-pistol-owners-forum.com/board/index.php?topic=5448.0)
Quote from: Brutuz on February 25, 2012, 02:50:15 PM
Specs, pics and a vid here
http://www.crosman-air-pistol-owners-forum.com/board/index.php?topic=5448.0 (http://www.crosman-air-pistol-owners-forum.com/board/index.php?topic=5448.0)
That would make a great little carbine if it were mine.Nice! :-*
Thanks, Pistolman and I will make another vid, but for now only this one available
[youtube]https://www.youtube.com/watch?v=G4JDq-WA10I#]Custom .25 cal Benjamin Marauder pistol[/url]
Next vid will be made in about 3 to 4 weeks if all goes well, I'm on a 2 week stretch 24/7 availability duty for work at the moment....
That's pretty Bad A$$ :-* :-* :-*
Not a Pistol, But it's my .25 (Sporting my Lam Stock). :-*
Let's keep this thread going. :-*
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01882.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01883.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01881-1.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01885.jpg)
And with the Ltd Ed Crosman Factory Camo
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01986.jpg)
Once again, I pronounce a 1325, a 2530 and a killer 1377 all from Mountain Air Custom Airguns.
Here are some numbers, too:
The pellets used for all my testing are Beeman H&N Match Wadcutters weighing in at 20.06 grains.
1325 at 5 pumps - 20 shots
FPS FPE
Min = 353.70 5.57
Max = 359.00 5.74
Mean = 356.66 5.67
Median = 356.60 5.67
Hi Lo Spread = 5.30 0.17
Std Deviation = 1.93 0.06
1325 at 10 pumps - 20 shots
FPS FPE
Min = 447.70 8.93
Max = 462.80 9.54
Mean = 453.78 9.18
Median = 452.70 9.13
Hi Lo Spread = 15.10 0.61
Std Deviation = 6.34 0.26
The 1325 using some Beeman pellets that weighed 20.06 grains and using 12 pumps and 10 shots averaged 467.6 FPS. Then doing 15 pumps and 10 shots got an average of 496.4 FPS.
2540 new powerlet - 20 shots
FPS FPE
Min = 482.40 10.37
Max = 523.40 12.21
Mean = 501.93 11.23
Median = 499.05 11.10
Hi Lo Spread = 41.00 1.84
Std Deviation = 15.54 0.70
Thanks again, Carl :-*
Nice Carl :-* Great FPE's
Do you ever shoot Lead Balls? (#3 Lead Shot)
It's a hoot ;D
Quote from: Brutuz on February 25, 2012, 04:06:09 PM
Thanks, Pistolman and I will make another vid, but for now only this one available
[youtube]https://www.youtube.com/watch?v=G4JDq-WA10I#]Custom .25 cal Benjamin Marauder pistol[/url]
Next vid will be made in about 3 to 4 weeks if all goes well, I'm on a 2 week stretch 24/7 availability duty for work at the moment....
Cool little vid, nice mod and cool display of numbers/performance! What else could we ask for? ???
Quote from: Noah on February 26, 2012, 02:06:56 AM
Cool little vid, nice mod and cool display of numbers/performance! What else could we ask for? ???
x2 What Noah said. Thanks Pistolman :-* :-*
Quote from: 0351_Vet on February 25, 2012, 07:33:50 PM
Not a Pistol, But it's my .25 (Sporting my Lam Stock). :-*
Let's keep this thread going. :-*
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01882.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01883.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01881-1.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01885.jpg)
And with the Ltd Ed Crosman Factory Camo
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01986.jpg)
what scope are you boasting on that M-rod bud?
Quote from: Serpents Den on February 26, 2012, 04:51:51 AM
what scope are you boasting on that M-rod bud?
CP 4x16x56 Power Classv :-*
Quote from: turbonoma on February 24, 2012, 10:17:02 PM
Well this one is based on a 22xx platform by Dennis Quackenbush. It's a Daq .25cal Outlaw pistol converted to a light carbine. I have it dialed to shoot JSB Kings 25.4gr,2700psi fill,at 935fps/49.3fpe. I also shoot #3 buckshot 23.3gr,2500psi fill,at 747fps/28.8fpe.
(http://i160.photobucket.com/albums/t193/turbonoma1998/Airgunning/DSC01885.jpg)
I know he was making versions of that stock for the 13xx and 22xx a while back...I would love to own one or two of those
So let's see them.25's :-*
Pistol is mine, but the nice Video and all the grafics in it are done by Bert (Brutuz) ! ;)
Thanks again Bert, great Vid ! :-*
greetingsss...Guido :P
Pistol Man, Do you have a few more pics? Nice .25
Is that a M-Rod Air tube and Breech?
There is a hole topic of it with pic and vid and all.
Just look and find... ;)
You probably have seen my only .25 cal shooter. "Stone Cold" has been under going a face lift recently. That ordeal is finally over as my long awaited .040 spring arrived today.
"STONE COLD" is based on a Disco tube 11.5 inches long that I cut and machined to eliminate the gage hole.
One end of the tube sports a PA/Tippman stock adapter I got from Carl
The other end has a QB79 drop block for mounting a 2000 psi reg and 3000 psi/22 cu.in. HPA Expert Tank
18inch TOW barrel prepped by C Mellon and a Mellon flow thru bolt
SS breech by Don Cothran, drilled for both screw locations
BNM Riser block with some extra pockets machined for o-rings to seal
B@A Disco Boss Valve with some internal work to smooth flow
Hammer extended .065 on front side to add weight and open valve further and longer
Extended Hammer spring guide in hammer to add weight
TP is SS thin wall tube .25 x .210
I was able to shoot over the chrony this afternoon and am well pleased
With the new spring, H@N FTT are traveling 875 fps with a SD of 1.4 FPE 33.4
Poly Mags are moving at 800fps with a SD of 1 FPE 35.5
On top is a HD7 LUCID RED DOT (sweet)
TippMan stock from Carl and a Winchester sling complete the package
Stone Cold is a pleasure to shoot, With only a couple days left in Squirrel season I cant wait to put a POLY Mag in one. I'm ready for some more Squirrel bisque!!!
So much work has gone into this shooter I am sure something has been left out. If you have questions I am happy to answer.
While testing today I placed a pellet tin lid at 30 yards. Thought you might like to see what happened to it.
007,
Some cool $hit there. Nice numbers out of the gate and 33 FPE...NICE.
What's that thing dangling under the forearm area?
Also, what PSI are you running through that Disco Tube? (I just cut one too :)) :-*
How long is that thing from bottle end to stock end open?
Quote from: 0351_Vet on February 28, 2012, 12:52:19 AM
007,
Some cool $hit there. Nice numbers out of the gate and 33 FPE...NICE.
What's that thing dangling under the forearm area?
Also, what PSI are you running through that Disco Tube? (I just cut one too :)) :-*
That is a "starwarsish" looking fore grip I designed and machined. 4 inches long and 2.060 dia.
I am regulated at 2000psi. Have not got a shot count with the new spring but I guess it will be 40 or more with a fill of 3000psi
Quote from: 0351_Vet on February 28, 2012, 12:54:20 AM
How long is that thing from bottle end to stock end open?
Total length is 38.5"
Looks like a Made in America custom made flashlight called The Gatlight Mr. 007. I collect flashlights too but not at this price range. The more expensive ones are around $3,000.
http://www.candlepowerforums.com/vb/showthread.php?271230-Tri-V-Information (http://www.candlepowerforums.com/vb/showthread.php?271230-Tri-V-Information)
http://gatlight.com/OnlineOrdering.htm (http://gatlight.com/OnlineOrdering.htm)
Btw maybe some of you like Star Wars light sabre theme and may want to install trits on your airguns
http://www.candlepowerforums.com/vb/showthread.php?204484-Show-your-lights-with-trits (http://www.candlepowerforums.com/vb/showthread.php?204484-Show-your-lights-with-trits)!/page2&highlight=trits
I dunno if this thing is possible on aluminum but it is on titanium. Looks really cool imho. Engraving does too
http://www.candlepowerforums.com/vb/showthread.php?191925-Titanium-Collections-II/page13 (http://www.candlepowerforums.com/vb/showthread.php?191925-Titanium-Collections-II/page13)
http://www.candlepowerforums.com/vb/showthread.php?259524-advice-on-flame-colouring-titanium-bezels-clips-etc (http://www.candlepowerforums.com/vb/showthread.php?259524-advice-on-flame-colouring-titanium-bezels-clips-etc)
http://www.candlepowerforums.com/vb/showthread.php?323373-Pocket-clip-amp-new-option (http://www.candlepowerforums.com/vb/showthread.php?323373-Pocket-clip-amp-new-option)
Quote from: crossliner on February 28, 2012, 05:09:16 AM
Looks like a Made in America custom made flashlight called The Gatlight Mr. 007. I collect flashlights too but not at this price range. The more expensive ones are around $3,000.
http://www.candlepowerforums.com/vb/showthread.php?271230-Tri-V-Information (http://www.candlepowerforums.com/vb/showthread.php?271230-Tri-V-Information)
http://gatlight.com/OnlineOrdering.htm (http://gatlight.com/OnlineOrdering.htm)
Btw maybe some of you like Star Wars light sabre theme and may want to install trits on your airguns
http://www.candlepowerforums.com/vb/showthread.php?204484-Show-your-lights-with-trits (http://www.candlepowerforums.com/vb/showthread.php?204484-Show-your-lights-with-trits)!/page2&highlight=trits
I dunno if this thing is possible on aluminum but it is on titanium. Looks really cool imho. Engraving does too
http://www.candlepowerforums.com/vb/showthread.php?191925-Titanium-Collections-II/page13 (http://www.candlepowerforums.com/vb/showthread.php?191925-Titanium-Collections-II/page13)
http://www.candlepowerforums.com/vb/showthread.php?259524-advice-on-flame-colouring-titanium-bezels-clips-etc (http://www.candlepowerforums.com/vb/showthread.php?259524-advice-on-flame-colouring-titanium-bezels-clips-etc)
http://www.candlepowerforums.com/vb/showthread.php?323373-Pocket-clip-amp-new-option (http://www.candlepowerforums.com/vb/showthread.php?323373-Pocket-clip-amp-new-option)
Hmmm
Ahaha I hear you Mr. Vet 8)
Editted ??? ??? ??? ???
Quote from: 0351_Vet on February 28, 2012, 08:02:34 AM
Great way to screw-up a Thread............Crossliner.? ??? ??? ??? ???
What do you mean by this Mr. Vet? I was only showing a resemblance to Mr. 007's gatling gun design forearm and while I was at it I added up some tidbits that might interest some.
Quote from: 0351_Vet on February 28, 2012, 05:17:13 AM
WTF? BUCK OFAMA
At least I do not use "improper" language no matter how subtle it sounds or even if it's under the guise of acronyms or different characters Mr. Vet. Besides you as an ex military should not disrespect the name of your president or anyone for that matter. Best regards everyone and my apologies if I have offended anyone here.
Gentlemen, I hope the next post shows a nice pic of some .25 airguns,I do like to keep my finger of the delete button 8)
Quote from: Cross Pistol Packer on February 28, 2012, 01:51:49 PM
I hope the next post shows a nice pic of some .25 airguns 8)
Well, It's almost together....Waiting on Crosman Again...... ??? ??? ??? ??? :) :) :) :)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC02008.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC02007.jpg)
Good pics,lets hope Crosman send your parts soon :-*
Quote from: Cross Pistol Packer on February 28, 2012, 10:00:58 PM
Good pics,lets hope Crosman send your parts soon :-*
CPP -"There is just something about .25 and 3000PSI, I have an Obsession with". :-* :-* :-*
If that .25 pellet sees the full 3000psi on its tail, Racoons best stay a good 40m+ from the business end of your barrel :)
Quote from: Cross Pistol Packer on February 28, 2012, 10:19:50 PM
If that .25 pellet sees the full 3000psi on its tail, Racoons best stay a good 40m+ from the business end of your barrel :)
It will.... :-* :-* :-*
Quote from: 0351_Vet on February 25, 2012, 07:33:50 PM
Not a Pistol, But it's my .25 (Sporting my Lam Stock). :-*
Let's keep this thread going. :-*
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01882.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01883.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01881-1.jpg)
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01885.jpg)
And with the Ltd Ed Crosman Factory Camo
(http://i1141.photobucket.com/albums/n589/USMC7579/Airguns/DSC01986.jpg)
Do you make your own stocks? Or do you buy them?
This is not mine, nor a pistol. I thought I would throw this in,
(I do not own any rights for this video)
[youtube]https://www.youtube.com/watch?feature=player_detailpage&v=GVx8i4_VJVQ#].25 cal Discovery by Aigunlab.com 80 FPE power mods Part 1 of 4[/url]
That is a .25 cal disco.
Quote from: Colt25 on February 29, 2012, 07:44:06 PM
This is not mine, nor a pistol. I thought I would throw this in,
(I do not own any rights for this video)
That is a .25 cal disco.
That is Lloyd Stikes (Lloyd SS @ the GTA Forum). I have had many conversations with him.
Great Guy and Excellent Engineer. That .25 rocks but you should see his .45/70
Currently he is starting production on a Double-Disco Air-tube Setup.
www.airlabs.com (http://www.airlabs.com)
Well it's not a pistol but here it is my a 2540 Carbine . I will be replacing the trigger frame & hammer
with the new modded version from the marauder pistol. There's a temporary trigger frame off
my 1377 attached at the mo. Also a temp rd20 red dot. Shoot's very good. 25 shots from a 12g before a noticeable drop.
Parts List:
14" .25cal barrel 1/2 unf recrowned (floating)
Reduced volume Pro-Top valve
Lighter hammer spring
SS screw set
Disco breech (has both old and new screw holes plus 3 grubs to float barrel - all screws metric)
.25 SS Probe
Tootsie roll grip (Sprayed Olive Krylon matt)
Crosman 1399 stock (Sprayed Olive Krylon matt)
2240 body
Temp trigger frame & hammer
Unknown Custom muzzle brake (works very well)
19 GRN Rhinos Pellets. Brand new 12g cart.
count,velocity (FPS),power (FPE)
count,velocity,power
01, 520,11.41
02, 495,10.33
03, 486,9.97
04, 505,10.76
05, 514,11.16
06, 509,10.93
07, 520,11.43
08, 510,10.96
09, 493,10.27
10, 524,11.60
(http://i1105.photobucket.com/albums/h346/NorthStaR2250/25XX/19grn25calprotop1nutsiliconepolyreducer.jpg)
WALTHER Hunter Energy (DumDums) 28.4GRN
count,velocity (FPS),power (FPE)
count,velocity,power
01, 404,10.30
02, 431,11.71
03, 473,14.09
04, 436,12.01
05, 411,10.64
06, 418,11.00
07, 433,11.84
08, 440,12.23
09, 399,10.04
10, 392,9.70
(http://i1105.photobucket.com/albums/h346/NorthStaR2250/25XX/284grn25calprotop1nutsiliconepolyreducer.jpg)
(http://i1105.photobucket.com/albums/h346/NorthStaR2250/2540%20Carbine/DSC01125.jpg)
(http://i1105.photobucket.com/albums/h346/NorthStaR2250/2540%20Carbine/DSC01136.jpg)
(http://i1105.photobucket.com/albums/h346/NorthStaR2250/2540%20Carbine/DSC01141.jpg)
Very Cool Northstar :-*
Looking good NS! Especially like that fore-grip. Did you make that yourself or buy it somewhere?
Cheers,
Jerry
Thanks fellas. 8)
The roll grip was purchased last year off the good Sir Quickster47. I'm not sure of the origins/maker.
I've been wanting to use the last one and this was perfect for it. I wanted to keep this as a skeleton gun, minimal...
Some day i will own one or build a .25 Cal pistol. :-*
Mike