Text only | Text with Images

Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: k.boots on October 17, 2017, 01:05:37 PM

Title: size
Post by: k.boots on October 17, 2017, 01:05:37 PM
hi , going to buy a set of hex keys am I right that the crosman will be metric ???
Title: Re: size
Post by: CraigH on October 17, 2017, 01:19:50 PM
The machine screws on 13XX and 22XX family air pistols are SAE threads.
Title: Re: size
Post by: Multigunner on October 17, 2017, 05:28:41 PM
The tiny hex head of the breech/receiver mounting screw is not found in most of the cheaper hex wrench sets. Be sure to look for it before you buy.

Also I found that the small ball head hex wrench doesn't work well at all, the head of the breech screw is too shallow, I had to grind the ball tip off before it would grip well enough to turn the screw.

If you plan to do much work on these order a slot head breech screw.
Title: Re: size
Post by: k.boots on October 17, 2017, 09:04:23 PM
thanks , for your quick response  I will get a couple o the slot head screw regards "ken
Title: Re: size
Post by: rangerfredbob on October 18, 2017, 06:23:45 AM
I've always had good results using a T05 Torx bit on the breech screw without doing the flat head screw thing... I have this thing against slotted screws, they are a last resort...
Title: Re: size
Post by: k.boots on October 30, 2017, 07:40:35 PM
bought my self a good set which fit  all  thanks. 'ken
Text only | Text with Images