This topic is to post your real world chrony tests with different airguns. Rifle, or pistol.
Please include Average velocity, as well as Hi and Low velocity, the gun, the pellets, and the temp where you shot.
Are you looking for velocities of guns in stock configuration?
With all the possible combinations of custom modifications, accessories and pellet varieties, I would think this thread could get unwieldy very quickly.
Quote from: breakfastchef on April 19, 2013, 05:04:47 AM
Are you looking for velocities of guns in stock configuration?
With all the possible combinations of custom modifications, accessories and pellet varieties, I would think this thread could get unwieldy very quickly.
Well, list the mods, and the velocity. That way if you are about to do a mod you know a general idea of the velocity change...
phase 2 1377 steel breech 10.25" .177 factory 1377 barrel 10 pumps
525 fps 3ft from chrony 8 pumps cphp .177 8gr 4.9fpe bone stock
650 fps 3ft from chrony 10 pumps - phase 1 760 piston, flat-faced valve, mellon extended probe cphp .177 8gr 7.5fpe
662fps 15ft from chrony 35 pumps- same mods as above except hammer spring .06_, 14.5" .22 barrel beeman kodiak 21gr 20.4fpe
Benjamin Trail NP .22 cal:
Advertised @ 950 fps, reality: H - 733.1, L - 723.2, AVG - 728.2 using H&N FTT 14.66 gr (17.3 fpe)
1750 PCP .177 cal
Disco valve, factory 2250 tube, 45 gram hammer, .050" TP, clipped 2240 hammer spring, choked 14" barrel, 2000psi fill ending @ 650-700psi
60 shots within 4% of peak fps. H - 506.6, L - 485.2, AVG - 495.9 fps using 7.56 gr H&N Match Pistol wadcutter
Beeman P-17
H - 412.9, L - 403.3, AVG - 408.1 using H&N Excite Econ wadcutter
2260 HPA
Disco valve, HPA Sports extended valve front, 5/32" (.156") TP, Disco hammer spring w/power adjuster, 13 ci bottle reg'd @ 1500psi
Current tune: 925 fps using 16 gr Predator Polymag (30.4 fpe)
Do not want to retype fps in this thread
can be found here...
http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,12770.0.html (http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,12770.0.html)