Text only | Text with Images

Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: millipede on August 05, 2012, 08:09:12 PM

Title: what tool do i need for this?
Post by: millipede on August 05, 2012, 08:09:12 PM
(http://i729.photobucket.com/albums/ww292/MilliFlytrap/Pellet%20gun/IMG_07066-1.jpg)

i want to move the seat of the valve stem closer to the transfer port for better direct flow into the barrel but i don't know what is needed to make the conical shape. basically i want to remove as much material as i can but not get rid of the edge that the stem seals on
Title: Re: what tool do i need for this?
Post by: eric on August 05, 2012, 09:30:36 PM
have you angled the port --- to do what you want to do a lathe is probably your best bet or find someone who can do it for you ar make a custom valve.
Title: Re: what tool do i need for this?
Post by: breakfastchef on August 06, 2012, 12:12:47 AM
Quote from: eric on August 05, 2012, 09:30:36 PM
have you angled the port --- to do what you want to do a lathe is probably your best bet or find someone who can do it for you ar make a custom valve.

x2. If you muck up the valve seat, the valve is useless.
Text only | Text with Images