Print Page - 1377 Steel Breech Question

Title: 1377 Steel Breech Question
Post by: Canam1 on August 10, 2012, 03:33:45 PM

Hello All,
I received my steel breech from Crosman. I seem to remember seeing horror storys on quality of finish, but mine looks great.
Please bear with me as I am a noobie at this. When you start taking things apart and you pull the bolt back to get to the front screw do you then hold things together and pull the trigger to release the tension?
Then one would proceed at removing the rear screw and lift the breech off.

Thanks

Title: Re: 1377 Steel Breech Question
Post by: 1377x on August 10, 2012, 04:21:06 PM

http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,185.0.html (http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,185.0.html)

i would leave it cocked that is the position the hammer pin has to be in when mounting the breech

Title: Re: 1377 Steel Breech Question
Post by: RC1947 on August 10, 2012, 04:31:44 PM

Yes, I've left it cocked also. RC

Title: Re: 1377 Steel Breech Question
Post by: Canam1 on August 11, 2012, 02:20:40 PM

Thanks you for the inputs.

Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: Canam1 on August 10, 2012, 03:33:45 PM