Topic: Pics of the PDG Bomb & Destroyer

[Monkeydad1969]

I hope to use the Destroyers in place of slugs if they perform at 50 yards.  The shot on the can dropped about 1.5" from actual POA, but that was expected since my Disco is set up for the 14.3 Benji's.

Joe

[Monkeydad1969]

Got bored, talking to my bud on the GTA...so I made some experiments---



Destroyer next to Destroyer with cross cut and Destroyer hollowed out and filled with super glue.  Wanted to use hot glue, but need a smaller tip.

[tinker]

They do look very interesting!

Glen

[Monkeydad1969]

I went out p-dawg today with my youngest and my bud Jason, but the wind was to bad to do any testing.  But at 40 yards they shot pretty straight.  I think they are better suited in a pcp and not a springer like others are getting bad results with...the Destroyer and Bomb pellets.

Joe

[tinker]

Joe, might be true.

Glen

[Monkeydad1969]

So I shot the molested Destroyers into my clay.  With enough fps, I am pretty sure the ones I drill out hollowpoints into will be nasty.  The ones with the cross cuts will need to be pried open a little to get the results I want.  But I have high hopes for making HP Destroyers.  Hollowed out one on right.

[tinker]

The hollow point idea may be the way to go.

Glen

[Monkeydad1969]

I'm thinking so.  So much that I am about to make up about 50 and order a few more tins.

[Monkeydad1969]

Here go you Glen.  I drilled this one short of 1/8" with a 5/64" bit and used the Sumatra on the red dot at about the first 1/4 turn on the power wheel.

[tinker]

Now that looks like a pellet that should anchor a few pests!  How do they shoot in the Sumatra?

Today we tried some on an empty spray paint can and the accuracy was good enough to make my partner smile.  About 30 yards out. Two 5" diameter coconuts were blown off the tree shooting Bomb .22 pellets out of a 24" barreled Condor! One shot per coconut.

Glen

[Monkeydad1969]

I didn't go for distance.  I will try this weekend.

[K.O.]

Here go you Glen.  I drilled this one short of 1/8" with a 5/64" bit and used the Sumatra on the red dot at about the first 1/4 turn on the power wheel.

That just be NASTY...

[Monkeydad1969]

Yeah it izz!