1377 safety ball and spring...

Started by TennX, December 30, 2015, 03:56:51 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

TennX

December 30, 2015, 03:56:51 PM Last Edit: December 30, 2015, 04:11:28 PM by TennX
Well after working on 5 guns, I only had one safety ball and spring slip out...can these be reinstalled from the top,by taking the grip frame off ...I don't use the safetys but guns should have them...many  thanks

JMJinNC

#1
December 30, 2015, 05:40:06 PM
Exactly. Take the frame off. Easiest way.

JMJ
John

mudduck48

#3
December 30, 2015, 06:15:49 PM
If you have any, put a little grease in the hole where the ball and spring goes. This will keep the ball and spring from taking off the next time you remove the frame. ;)
We need to keep going and have fun doing it.

TennX

#4
December 30, 2015, 06:21:09 PM
Quote from: mudduck48 on December 30, 2015, 06:15:49 PM
If you have any, put a little grease in the hole where the ball and spring goes. This will keep the ball and spring from taking off the next time you remove the frame. ;)

  thanks for the tip....
Print
Go Up Pages1
User actions