Topic: 1322 - Ph 2 - Alchemy Trigger recommendation?

[Underdog]

Hey guys,
I'm back from a long hiatus.
Thanks to Eric's contribution of a steel breech, I got my 1322 working decent. Thanks Eric!

Now, years later, I'm back to getting just a little more oomph out of this thing.
I'm fixing to order an RP valve and an adjustable sear spring from Alchemy, but I also want to order a trigger that's more comfortable than the stock trigger.
Which of these triggers is reasonable but more comfortable than that thin stock trigger?
http://www.alchemyairwerks.com/store/c12/Triggers_%2F_Shoes.html

And can you tell me where I might find a better rear sight than the plastic one? It's easily bumped out of place.

[JMJinNC]

I make “waffle” trigger shoes for my target gun, so I’d say the ribbed Alchemy trigger would be the closest thing.



Archer Airguns had a notch rear sight that was supposed to fit the Crosman breech.

JMJinNC

[Underdog]

Thanks for the response! That's a sweet looking pistol you have there.

I was hoping for a recommend for one of the <$20 triggers though.
This stock trigger is ~1/8 thick overall, but just a tad over that at the tip. And it's quite uncomfortable.

I can't tell if the $13-$14 triggers are thicker than that because David Grimes doesn't say:
http://www.alchemyairwerks.com/store/p8/Model_PolishedNoVents.html

I emailed him a couple of days ago, but haven't heard back..
Time to call him again I guess.

I'm looking at the only rear sight that I can find at Archer, but I don't think it fits an old 1322...
https://www.archerairguns.com/Iron-Sights-s/61.htm
Suppose they discontinued the one you mention?

[crossliner]

No, they are not thicker.

If you have  Crosman Custom Shop gun you can order a trigger shoe from Crosman for $5.00

I was able to buy some from them in black and red.

The best-feeling trigger is the Roller Trigger.

I have 4 of them.

[Underdog]

What's a Crosman Custom Shop gun?

I suppose that shoe won't fit my older phase-2 1322.

[JMJinNC]

My apologies, I thought you had a steel breech.

Jmj

[crossliner]

What's a Crosman Custom Shop gun?

I suppose that shoe won't fit my older phase-2 1322.

It was like a designer shop Crosman used to have, and where you can order MRODs,13xx, and 22xx guns with different breeches, barrels, grips, stocks, etc...

[Underdog]

My apologies, I thought you had a steel breech.

Jmj

Actually it does. Eric gave me a steel breech, and I replaced the old plastic one that didn't work so well.

I'm not sure it's a Crosman breech or whether someone manufactured it though.
It doesn't have the small screw hole that should be just aft of the breech seal port.

[Underdog]

Sorry about the rust... the thing has been sitting in my sunroom for a while, and it gets humid in there.
I need to take this thing apart and re-apply some bluing or paint, and then keep it oiled.

[flairgunner77]

Nice pistol.  Where did you buy the barrel band and bipod legs or are they fabricated by you. Great work!

Dave B