WHAT's IN YOUR FEDEX/UPS TRUCK?

Started by BDS, September 24, 2012, 05:18:22 PM

0 Members and 371 Guests are viewing this topic.

targettgii

Tom

Modded 1377
Modded 2240
Modded 1322
1750 HPA pistol
Stock 2260(for now)
.22 Gen.2 Marauder
CCS 2300
Custom 1740
38 T

KevinP

Kevin
Albany, New York

1377x

#2372
Quote from: targettgii on September 04, 2013, 04:32:26 AM
So what you building now Ed???
upgrading my s/s2260 and/or 1377
gonna do some breech swapping between the two see which breech fits where both will have hi-rise breeches old school vs new school


Quote from: breakfastchef on September 04, 2013, 03:32:55 AM

Cool looking breech. What is the purpose of the screw in that plate on the side of the breech?
they secure the cover in place. there is a breech screw under the cover
no worries about a tipping pellet that gets stuck at the breech hole
closed mouths dont get fed

Davio

Quote from: brz-ryder on September 04, 2013, 02:17:10 AM
Another 2240 this one is staying stock  :-*

Jim
;D ;D ;D ;D ;D ;D ;D ;D (inhale)  ;D ;D ;D ;D ;D ;D ;D ;D

and bears are using Charmin, too.   ;)
Silence is golden. Duct Tape is silver. Gravy is brown.

2400KT bulk fed repeater .22
2260 .22 w/ steel breech
2250XE .22
Benjamin Discovery .22
Benjamin Marauder .25
Crosman 1077 WOOD .177
Crosman 1077 BLACK .177
Benjamin NP Trail .177
Crosman 2240 Camo .22
Crosman 2240 polished .22
Crosman 2300KT .22
Dan Wesson 8" .177
Crosman Vigilante .177
Hatsan A44PA .25
Hatsan A44W .25
Sheridan 2260
Benjamin Trail NP XL .25
Benjamin Titan NP .22
Benjamin Marauder Pistol .22
Benjamin 392 .22
Sheridan C9 PB 50th Anniversary .20
Crosman 1701-P .177

rws_53

Quote from: breakfastchef on September 04, 2013, 03:59:18 AM
Only the best for you, Ross.

I'm on the hunt to find a pellet that will tighten up the groups in the comps  ;)

tri-5-ron

just ordered the back packer pump handle for my 1377/22 conversion.

Tater

Quote from: tri-5-ron on September 04, 2013, 05:19:14 AM
just ordered the back packer pump handle for my 1377/22 conversion.

You'll love it and it will be one of your better purchases. After shooting with it on for a while, I tried my stock 1377 with the small brown pump handle. I hate it.
Just put a few strips of felt or something similar in them and they quieter too. They sell sticky-backed felt strips at Home Depot to put under chair or couch legs that work perfectly. Cheap too.
Jerry

NW Chicago suburbs

targettgii

Got the new o-rings for my valve today I'll try not to chew them up this time round. Got a couple disco hammer springs also.
Tom

Modded 1377
Modded 2240
Modded 1322
1750 HPA pistol
Stock 2260(for now)
.22 Gen.2 Marauder
CCS 2300
Custom 1740
38 T

bgmcgee

I got a flywheel for the Torino coming. Does that count?
"I've lost what's left of my right mind"

DBOdude

just got off the phone ordering from opticsplanet.com

Leapers UTG AccuShot 30mm Tube 4-16x44
Leapers AccuShot New Gen 80mm Fine Objective Adjustment Wheel SCP-SW080B
Leapers UTG Low Profile Dovetail to Picatinny Rail Mount Adapter MNT-DT2PW01
$134.88 shipped including the %5 discount

they didn't have any 30mm dovetail rings in stock that i liked so i figured i'd try the adapter thingys since the DBO has zero recoil .
the lady said it'll be 5-10 days for delivery .

thanks for putting up with my scope questions and comments ;)
Everything isn't for Everybody ......

breakfastchef

That is a decent scope, DBO. I have a 3-12 side focus with 100mm side wheel mounted on my Challenger. I have a set of 30mm Sportsmatch Med/High dovetail rings I am not using. Shoot me a PM if you might be interested.


Quote from: DBOdude on September 05, 2013, 07:40:10 PM
just got off the phone ordering from opticsplanet.com

Leapers UTG AccuShot 30mm Tube 4-16x44
Leapers AccuShot New Gen 80mm Fine Objective Adjustment Wheel SCP-SW080B
Leapers UTG Low Profile Dovetail to Picatinny Rail Mount Adapter MNT-DT2PW01
$134.88 shipped including the %5 discount

they didn't have any 30mm dovetail rings in stock that i liked so i figured i'd try the adapter thingys since the DBO has zero recoil .
the lady said it'll be 5-10 days for delivery .

thanks for putting up with my scope questions and comments ;)
Larry

arkmaker †

This puppy wasn't suppose to be here until next Tuesday!! So when I came home today and saw it leaning up against the door, well....it turned out to be a good day after all!!


Benjamin Trail NP .22
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

BDS

Nice Rich... I'm guessing prev-owned? I'm seeing a CDT trigger in there and I would guess the notorious NP Trail breech bolt bushings and breech seal may also have been taken care of? I hope-I hope?  :-*
Brian

arkmaker †

Not sure about a new seal and bushings, but yes, Charlie the Tuna Trigger and it is sweet feeling. Smooth. I will have to wait a bit before I can give a range report, but heck....I just may bring this to the PB range.
Rich
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

BDS

Cool beans Rich, I ask about the breech parts because, the seal and the pins/washers or bushing always seem to show up in the "My NP needs..." type of threads, the GTA should have a ton o' info just by searching?
Brian