WHAT's IN YOUR FEDEX/UPS TRUCK?

Started by BDS, September 24, 2012, 05:18:22 PM

0 Members and 348 Guests are viewing this topic.

Print
Go Down Pages 1 ... 190 191 192 193 194 ... 355
User actions

breakfastchef

#2865
December 31, 2013, 11:04:36 PM
Quote from: BillK on December 31, 2013, 09:52:06 PM
Saw this the other day on yellow and for $95. shipped & I couldn't pass it up.  Especially since I needed it.  ;)
It's about year and a half old and doesn't look like any screws have been turned.  Probably wont be able to say that in a day or so.


Good score, Bill. I posted about this gun on the 'Seen for sale somewhere else on the net' thread. Glad a CAPOF member got it.
Larry

vertguy

#2866
December 31, 2013, 11:16:34 PM
Nice gun!

I looked at it briefly, but passed... now that I bought those grips Rick posted yesterday, a gun like that would be the perfect combination. I might need to keep an eye out for something similar as it is probably cheaper to go that route or a 2300KT in lieu of modding the 2240.
PC77
FX Verminator .22

Tater

#2867
December 31, 2013, 11:24:16 PM
Are the main differences between the 2300T and a 2240 the barrel/bolt size, steel breech and LPA sight?
Jerry

NW Chicago suburbs

BillK

#2868
January 01, 2014, 12:08:25 AM
Quote from: Tater on December 31, 2013, 11:24:16 PM
Are the main differences between the 2300T and a 2240 the barrel/bolt size, steel breech and LPA sight?
The valve has a spacer and a different front section.  Don't know what the difference is yet but it is a different part #.   Probably less volume.  The bolt & handle are same as 2240.  It has an over travel screw and a sear spring adjuster as well as short breech & MIM.
As quiet as it is in comparison to the 2240 it must be sipping CO2.  It shoots straight is about all I know now. 
Will file full report tomorrow between football games. :)
West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco - Prod
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260 - 1701P
1322 - 1377
MK I & II

Bazmati2020

#2869
January 01, 2014, 08:52:46 AM
Comparison thread on the valve including pictures.  I have a 2300 but valve stem seal went on mine and I replaced with standard valve (thanks to Droid  :-*) .  More powerful now but lower shot count.

http://www.airgunhome.com/agforum/viewtopic.php?p=23428

Cwlongshot

#2870
January 01, 2014, 04:40:56 PM Last Edit: January 01, 2014, 04:43:23 PM by Cwlongshot
 :P :P :P I dropped the hammer and got a tracking number on a Flying Dragon, XISICO XS60C, PCP in .22!

Was looking hard at CO2 guns and the 2260 held a real attraction, but the price, availability and power of the XS won out!  ;) ;)

The XS will do a honest 25FPE!

CW
BENJAMIN's: 392PA '11 • Marauder .25 • MAC1 tuned Disco .22 • 397P Nickle '81

CROSMAN's:  1389 Back Packer .20 '86 • Hawthorne M140 4th variant • 357 W/8'' '90 • 760 '75 • 1377 '13 CARBINE LOTS ''O'' Mods • 2200 Magnum '81 (First Gen) • 2100 '13 • 2240 '13 

DAISY's:  25 '10 • Red Ryder • 22X • 922

DIANA's:  34 .22 '05 (RWS)

SHERIDAN's:  Blue Streak '82  Steroid • Blue Streak '65 Steroid • Blue Streak '70 • Blue Streak '72 • C9 Blue Streak

WEBLY's:  Longbow .177 • Hurricane  .177

XISICO's:  XS60c .22 PCP

Tater

#2871
January 01, 2014, 07:31:48 PM
That is awesome CW! Congrats. Please post pics when it arrives.
Jerry

NW Chicago suburbs

KevinP

#2872
January 01, 2014, 08:58:12 PM
Been waiting on a new camera ... on ups truck -- out for delivery for three days now ....
Kevin
Albany, New York

breakfastchef

#2873
January 01, 2014, 11:39:02 PM
Quote from: KevinP on January 01, 2014, 08:58:12 PM
Been waiting on a new camera ... on ups truck -- out for delivery for three days now ....


Yea selfies
Larry

Cwlongshot

#2874
January 02, 2014, 01:27:59 AM
Ordered a LDC for the XISCO today too!!'She has gotts be quite to shoot rats!!  LOL

I'm pretty excited I see many claims of upper 800 FPS with heavy 18g pellets!! A few chrono pics showing mid 800's FPS with 15g pellets on LOW power settings! At worst that's a  25+FPE on the LOWEST settings!

CW
BENJAMIN's: 392PA '11 • Marauder .25 • MAC1 tuned Disco .22 • 397P Nickle '81

CROSMAN's:  1389 Back Packer .20 '86 • Hawthorne M140 4th variant • 357 W/8'' '90 • 760 '75 • 1377 '13 CARBINE LOTS ''O'' Mods • 2200 Magnum '81 (First Gen) • 2100 '13 • 2240 '13 

DAISY's:  25 '10 • Red Ryder • 22X • 922

DIANA's:  34 .22 '05 (RWS)

SHERIDAN's:  Blue Streak '82  Steroid • Blue Streak '65 Steroid • Blue Streak '70 • Blue Streak '72 • C9 Blue Streak

WEBLY's:  Longbow .177 • Hurricane  .177

XISICO's:  XS60c .22 PCP

rangerfredbob

#2875
January 02, 2014, 05:42:43 AM
You're being an enabler... Which LDC are you going for? does TKO have one? (I haven't looked into any yet, my Mrod came equipped...), with that much power i'd want one, the Mrod is spoiling me...
Near McMinnville, Oregon

Have me many an airgun :), count is 102 now...

arkmaker †

#2876
January 02, 2014, 11:07:16 AM
Quote from: Cwlongshot on January 01, 2014, 04:40:56 PM
:P :P :P I dropped the hammer and got a tracking number on a Flying Dragon, XISICO XS60C, PCP in .22!

Was looking hard at CO2 guns and the 2260 held a real attraction, but the price, availability and power of the XS won out!  ;) ;)

The XS will do a honest 25FPE!

CW


Looking forward to the review on this one. I kind of have a feeling that if Mike is working on them, you will have a winner  :-*
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

Cwlongshot

#2877
January 02, 2014, 04:49:19 PM Last Edit: January 02, 2014, 04:51:58 PM by Cwlongshot
Exactly Mike IS doing the mods himself!!

YES, TKO offers a LDC for this 14mm barrel.

LOVE my M-rod 25 too!!

I have a few mods lined up, I'm thinking power mods will NOT be required. ;)

I'm gonna do something with the ''finely'' figured Chinese wood  :P :P :P... Scope of coarse, unsure yet I have a few to choose from...

CW
BENJAMIN's: 392PA '11 • Marauder .25 • MAC1 tuned Disco .22 • 397P Nickle '81

CROSMAN's:  1389 Back Packer .20 '86 • Hawthorne M140 4th variant • 357 W/8'' '90 • 760 '75 • 1377 '13 CARBINE LOTS ''O'' Mods • 2200 Magnum '81 (First Gen) • 2100 '13 • 2240 '13 

DAISY's:  25 '10 • Red Ryder • 22X • 922

DIANA's:  34 .22 '05 (RWS)

SHERIDAN's:  Blue Streak '82  Steroid • Blue Streak '65 Steroid • Blue Streak '70 • Blue Streak '72 • C9 Blue Streak

WEBLY's:  Longbow .177 • Hurricane  .177

XISICO's:  XS60c .22 PCP

Takis63

#2878
January 02, 2014, 06:45:32 PM Last Edit: January 03, 2014, 08:24:45 AM by Takis63
I just ordered a set of grips for my 1377 from Gmac.

I think they are gonna look great on it. Not to mention the improved pump arm. I think it will make pumping a lot more easier.

Now on to search for a wire stock since i don't really like the plastic one from Crosman.

I've seen some excellent ones, browsing the gallery. I think a straight one would be perfect.

Any suggestions?

Takis
Crosman 1377
Crosman 1077
Hammerli AR-20
Walther LP-300XT
Stoeger X10

Bazmati2020

#2879
January 02, 2014, 08:09:13 PM
Takis Gmac do a brass one, but I know what you mean I've seen a few black/steel wire stocks and much prefer them.

Personally I'd like a straight one, think it will look sleeker and will raise the cheek for the sights
Print
Go Up Pages 1 ... 190 191 192 193 194 ... 355
User actions