What work did you just do?

Started by Fronzdan, October 27, 2012, 04:25:40 PM

0 Members and 4 Guests are viewing this topic.

Print
Go Down Pages 1 ... 128 129 130 131 132 ... 247
User actions

DRAGON64

#1935
July 29, 2013, 01:50:28 PM
Quote from: AaronMB on July 28, 2013, 10:14:25 PM
What's been fun recently was seeing the results of some Mother's polish after giving a few triggers some attention.

This polish really is good stuff - it was suggested here.  :-*

Can you provide some specifics on the spring in your trigger assembly...?
"He who fights with monsters should look to it that he himself does not become a monster, and if you look long into an abyss, the abyss also looks into you." - Friedrich Nietzsche

1377x

#1936
July 29, 2013, 03:24:31 PM
polished up a grip frame using mothers
now i will see if the mothers will make my tko1911 trigger shine
closed mouths dont get fed

Trophyhunter49

#1937
July 29, 2013, 10:38:19 PM
 ;) ;)   Been working on my 2nd  Gunnilet II build today. Hope by Friday 'll have it complete with picsan range report. Thidone is a pumper !!! ;) ;)

arkmaker †

#1938
July 29, 2013, 10:56:51 PM
Quote from: Trophyhunter49 on July 29, 2013, 10:38:19 PM
;) ;)   Been working on my 2nd  Gunnilet II build today. Hope by Friday 'll have it complete with picsan range report. Thidone is a pumper !!! ;) ;)


I don't have one for the Guantlett , so send me one, will ya??  ;D ;D
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

Trophyhunter49

#1939
July 29, 2013, 11:18:51 PM
 ;)  What kind you want LOL :D :D ;D ;D ;D ;D

Tater

#1940
July 30, 2013, 06:14:23 AM
Quote from: Trophyhunter49 on July 29, 2013, 11:18:51 PM
;)  What kind you want LOL :D :D ;D ;D ;D ;D

All of them.   ;D
Jerry

NW Chicago suburbs

Trophyhunter49

#1941
July 30, 2013, 07:16:29 AM
 :D :D :D ;D ;D ;D ;D ;D ;D ;D

AaronMB

#1942
July 30, 2013, 03:26:11 PM Last Edit: July 30, 2013, 03:28:08 PM by AaronMB
Quote from: DRAGON64 on July 29, 2013, 01:50:28 PM
Can you provide some specifics on the spring in your trigger assembly...?

All I did was take the stock Crosman spring with me to Ace Hardware and I selected a spring that was pretty close to stock size, but a touch softer - makes a noticeable difference in trigger pull. OSH seems to have decent spring selections, too.

There a few threads around here somewhere in which specific sizes are suggested by brand.

I can pull out the calipers and get some dimensions later, if you like.
"Patriotism is supporting your country all the time, and your government when it deserves it." -Twain

breakfastchef

#1943
July 30, 2013, 03:37:28 PM
Created a 2320KT.
Larry

1377x

#1944
July 30, 2013, 06:15:26 PM
fished removing the casting marks on my grip frame and sent it off for refinishing. since its raining today might as well see what mothers will do for the tko1911 trigger
closed mouths dont get fed

Cwlongshot

#1945
July 30, 2013, 11:01:15 PM
My new BRASS valve for my used 392 arrived and I'm heading down to install it!! :P :P :P



CW
BENJAMIN's: 392PA '11 • Marauder .25 • MAC1 tuned Disco .22 • 397P Nickle '81

CROSMAN's:  1389 Back Packer .20 '86 • Hawthorne M140 4th variant • 357 W/8'' '90 • 760 '75 • 1377 '13 CARBINE LOTS ''O'' Mods • 2200 Magnum '81 (First Gen) • 2100 '13 • 2240 '13 

DAISY's:  25 '10 • Red Ryder • 22X • 922

DIANA's:  34 .22 '05 (RWS)

SHERIDAN's:  Blue Streak '82  Steroid • Blue Streak '65 Steroid • Blue Streak '70 • Blue Streak '72 • C9 Blue Streak

WEBLY's:  Longbow .177 • Hurricane  .177

XISICO's:  XS60c .22 PCP

1377x

#1946
July 30, 2013, 11:03:14 PM
Quote from: Cwlongshot on July 30, 2013, 11:01:15 PM
My new BRASS valve for my used 392 arrived and I'm heading down to install it!! :P :P :P



CW
crosman finally got the hint and start using brass valves again in the benji's
hopefully they do it for the 13xx again
closed mouths dont get fed

arkmaker †

#1947
July 30, 2013, 11:19:08 PM
Heard that the benji hb and eb have been mothballed. Is that true??? If it is, then all we will be seeing is more aluminum valves...
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

Cwlongshot

#1948
July 30, 2013, 11:34:07 PM


It had a aluminum in it from the factory... :o :o :o

CW
BENJAMIN's: 392PA '11 • Marauder .25 • MAC1 tuned Disco .22 • 397P Nickle '81

CROSMAN's:  1389 Back Packer .20 '86 • Hawthorne M140 4th variant • 357 W/8'' '90 • 760 '75 • 1377 '13 CARBINE LOTS ''O'' Mods • 2200 Magnum '81 (First Gen) • 2100 '13 • 2240 '13 

DAISY's:  25 '10 • Red Ryder • 22X • 922

DIANA's:  34 .22 '05 (RWS)

SHERIDAN's:  Blue Streak '82  Steroid • Blue Streak '65 Steroid • Blue Streak '70 • Blue Streak '72 • C9 Blue Streak

WEBLY's:  Longbow .177 • Hurricane  .177

XISICO's:  XS60c .22 PCP

breakfastchef

#1949
July 31, 2013, 12:08:05 AM
Quote from: arkmaker on July 30, 2013, 11:19:08 PM
Heard that the benji hb and eb have been mothballed. Is that true??? If it is, then all we will be seeing is more aluminum valves...


Yup. Was reported in the last issue of Airgun Hobbyist. I think that takes care of all the guns of Sheridan heritage.
Larry
Print
Go Up Pages 1 ... 128 129 130 131 132 ... 247
User actions