Post Pics of your .25 Cal Pistols - And some Info

[Serpents Den]

Not a Pistol, But it's my .25 (Sporting my Lam Stock). 

Let's keep this thread going. 









And with the Ltd Ed Crosman Factory Camo

what scope are you boasting on that M-rod bud? 

[0351_Vet]

what scope are you boasting on that M-rod bud?

CP 4x16x56 Power Classv

[Serpents Den]

Well this one is based on a 22xx platform by Dennis Quackenbush. It's a Daq .25cal Outlaw pistol converted to a light carbine. I have it dialed to shoot JSB Kings 25.4gr,2700psi fill,at 935fps/49.3fpe. I also shoot #3 buckshot 23.3gr,2500psi fill,at 747fps/28.8fpe.

I know he was making versions of that stock for the 13xx and 22xx a while back...I would love to own one or two of those

[0351_Vet]

So let's see them.25's 

[PistolMan]

Pistol is mine, but the nice Video and all the grafics in it are done by Bert (Brutuz) ! 
Thanks again Bert, great Vid ! 

greetingsss...Guido 

[0351_Vet]

Pistol Man, Do you have a few more pics? Nice .25
Is that a M-Rod Air tube and Breech?

[PistolMan]

There is a hole topic of it with pic and vid and all.

Just look and find...

[mr007s]

You probably have seen my only .25 cal shooter. "Stone Cold" has been under going a face lift recently. That ordeal is finally over as my long awaited .040 spring arrived today.

"STONE COLD" is based on a Disco tube 11.5 inches long that I cut and machined to eliminate the gage hole.
One end of the tube sports a PA/Tippman stock adapter I got from Carl
The other end has a QB79 drop block for mounting a 2000 psi reg and 3000 psi/22 cu.in. HPA Expert Tank
18inch TOW barrel prepped by C Mellon and a Mellon flow thru bolt
SS breech by Don Cothran, drilled for both screw locations
BNM Riser block with some extra pockets machined for o-rings to seal
B@A Disco Boss Valve with some internal work to smooth flow
Hammer extended .065 on front side to add weight and open valve further and longer
Extended Hammer spring guide in hammer to add weight
TP is SS thin wall tube .25 x .210
I was able to shoot over the chrony this afternoon and am well pleased
With the new spring, H@N FTT are traveling 875 fps with a SD of 1.4  FPE 33.4
Poly Mags are moving at 800fps with a SD of 1  FPE 35.5
On top is a HD7 LUCID RED DOT (sweet)
TippMan stock from Carl and a Winchester sling complete the package

Stone Cold is a pleasure to shoot, With only a couple days left in Squirrel season I cant wait to put a POLY Mag in one. I'm ready for some more Squirrel bisque!!!

So much work has gone into this shooter I am sure something has been left out. If you have questions I am happy to answer.

While testing today I placed a pellet tin lid at 30 yards. Thought you might like to see what happened to it.

[0351_Vet]

007,

Some cool $hit there. Nice numbers out of the gate and 33 FPE...NICE.

What's that thing dangling under the forearm area?

Also, what PSI are you running through that Disco Tube? (I just cut one too  ) 

[0351_Vet]

How long is that thing from bottle end to stock end open?

[mr007s]

007,

Some cool $hit there. Nice numbers out of the gate and 33 FPE...NICE.

What's that thing dangling under the forearm area?

Also, what PSI are you running through that Disco Tube? (I just cut one too  ) 

That is a "starwarsish" looking fore grip I designed and machined. 4 inches long and 2.060 dia.

I am regulated at 2000psi. Have not got a shot count with the new spring but I guess it will be 40 or more with a fill of 3000psi

[mr007s]

How long is that thing from bottle end to stock end open?

Total length is 38.5"

[crossliner]

Looks like a Made in America custom made flashlight called The Gatlight Mr. 007. I collect flashlights too but not at this price range. The more expensive ones are around $3,000.

http://www.candlepowerforums.com/vb/showthread.php?271230-Tri-V-Information

http://gatlight.com/OnlineOrdering.htm

Btw maybe some of you like Star Wars light sabre theme and may want to install trits on your airguns

http://www.candlepowerforums.com/vb/showthread.php?204484-Show-your-lights-with-trits!/page2&highlight=trits

I dunno if this thing is possible on aluminum but it is on titanium. Looks really cool imho. Engraving does too

http://www.candlepowerforums.com/vb/showthread.php?191925-Titanium-Collections-II/page13

http://www.candlepowerforums.com/vb/showthread.php?259524-advice-on-flame-colouring-titanium-bezels-clips-etc

http://www.candlepowerforums.com/vb/showthread.php?323373-Pocket-clip-amp-new-option

[0351_Vet]

Looks like a Made in America custom made flashlight called The Gatlight Mr. 007. I collect flashlights too but not at this price range. The more expensive ones are around $3,000.

http://www.candlepowerforums.com/vb/showthread.php?271230-Tri-V-Information

http://gatlight.com/OnlineOrdering.htm

Btw maybe some of you like Star Wars light sabre theme and may want to install trits on your airguns

http://www.candlepowerforums.com/vb/showthread.php?204484-Show-your-lights-with-trits!/page2&highlight=trits

I dunno if this thing is possible on aluminum but it is on titanium. Looks really cool imho. Engraving does too

http://www.candlepowerforums.com/vb/showthread.php?191925-Titanium-Collections-II/page13

http://www.candlepowerforums.com/vb/showthread.php?259524-advice-on-flame-colouring-titanium-bezels-clips-etc

http://www.candlepowerforums.com/vb/showthread.php?323373-Pocket-clip-amp-new-option

Hmmm

[crossliner]

Ahaha I hear you Mr. Vet