What work did you just do?

[1377x]

Ed, you is the man! Took it all back apart again and did what you said. I drilled it out 11/64 used a small primer pocket reamer and a RCBS deburing tool. Now it lines up. Thank you again. QUACK,QUACK,QUACK!

glad it worked out for you!
guess its a little late now but if you have the valve out again you can soften the angle of the exhaust port too.it will help with the flow of air.
circled in red
oh! do the valve stem taper too.my gun lost over 20 fps with 10 pumps, i am assuming because i took out the light valve spring and my brass tapered valve stem went kaput.when i need to take my valve out i am going to taper the new plastic valve stem.i no longer like a valve spring that makes cocking the gun to pump a must,so the near stock spring stays

[YSYEO]

I swapped the trigger/grip frame, stock,  breech, and barrel from my modified 1322 onto a backpacker tube, and while I was at it I flat-topped the valve and installed a Mellon FT piston and C-clipped solid pin.   I also did some porting and smoothing of the exhaust port and added the little O-ring from a butane lighter to the transfer port.  I topped it with a Hawke 2-7x32 AO Scope.

With the leftover parts, I setup the 1322 with a 12" barrel and added a steel breech and the Crosman red dot, with a fiber optic front sight and MIM rear sight as backup.


I started with this:




and ended up with these:

[1377x]

ysyeo
that code in your sig
what is it
something about

[YSYEO]

ysyeo
that code in your sig
what is it
something about

Try googling "binary to text" 

[BDS]

YSYEO where ya been man?

ED, that's "binary" code in that sig pic, 1's and 0s are computer language, strings of them make the lil black boxes do things.

[BDS]

Always the 1938 Red Ryder comic eh YSYEO?


010000100110010100100000011100110111010101110010011001010010000
001110100011011110010000001100100011100100110100101101110011010
110010000001111001011011110111010101110010001000000100111101110
11001100001011011000111010001101001011011100110010100101110

                          equals

"Be sure to drink your Ovaltine."

[YSYEO]

YSYEO where ya been man?

A shooting buddy got me into .22 rimfire, so I've been taking a little side trip getting into my first firearms (if you don't count my Crosman 600s, which in Michigan are already classified as firearms  ).
I've been playing with a Henry H001 and a Ruger 10/22.

[BDS]

Nice... Henry's are great and the 10/22s are the "2240" of the .22 LR world... is there any type of accessory or mod part that they have not made that can be bolted onto or modified into the 10/22 guns?

Heck, I've even seen bottle opener/ piccatiny rails for the forearms 

[YSYEO]

Nice... Henry's are great and the 10/22s are the "2240" of the .22 LR world... is there any type of accessory or mod part that they have not made that can be bolted onto or modified into the 10/22 guns?

Heck, I've even seen bottle opener/ piccatiny rails for the forearms 

You can build one completely with non-Ruger parts!

[BDS]

Yup, sky is the limit with a 10/22, you see e'm at ranges from $150 "beater" to $5000 laminate stock, bull barrel, muzzle brake with GPS/Scope and bipods etc etc etc, those guys are almost as crazy as Crosmaniacs and thier $59 2240s converted into $500 pistols 

[1377x]

just got 3 accessories for my 10-22 today.i dont think ill change the stock unless a really cool bullpup stock comes around.there are some cool aluminum ones around but if you thonk the wait is long on a sc stock or some other glorious stock maker is long then you see the list for the aluminum bullpup i am talking about

[quickster47 †]

Try googling "binary to text" 

So you remember drinking Ovaltine?  Man that was a long time ago and not that many folks actually remember Ovaltine.  Do you remember the TV shaw that used Ovaltine as a sponsor and allowed you to get secret decoder rings.

Carl

[YSYEO]

So you remember drinking Ovaltine?  Man that was a long time ago and not that many folks actually remember Ovaltine.  Do you remember the TV shaw that used Ovaltine as a sponsor and allowed you to get secret decoder rings.

Carl

Ralphie's take on Ovaltine.
[youtube]https://www.youtube.com/watch?v=zdA__2tKoIU#]Be sure to drink your Ovaltine[/url]

[quickster47 †]

^^^  Awesome!!! 

Carl

[YSYEO]

I just finished cleaning up and resealing a 150 1st variant for a friend.    It had some rust on the barrel and tube, which cleaned up nicely with 0000 steel wool and oil.   The CO2 cap was worn to bare metal, so that got re-blued.   The rebuild kit came from Precision Pellet, along with kits for my newest 38T, a 2100, 622, and 766.   That should keep me busy for a while